cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

smsc,usb3503.yaml (2725B)

      1# SPDX-License-Identifier: GPL-2.0
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/usb/smsc,usb3503.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: SMSC USB3503 High-Speed Hub Controller Device Tree Bindings
      8
      9maintainers:
     10  - Dongjin Kim <tobetter@gmail.com>
     11
     12properties:
     13  compatible:
     14    enum:
     15      - smsc,usb3503
     16      - smsc,usb3503a
     17
     18  reg:
     19    maxItems: 1
     20
     21  connect-gpios:
     22    maxItems: 1
     23    description: >
     24      GPIO for connect
     25
     26  intn-gpios:
     27    maxItems: 1
     28    description: >
     29      GPIO for interrupt
     30
     31  reset-gpios:
     32    maxItems: 1
     33    description: >
     34      GPIO for reset
     35
     36  disabled-ports:
     37    $ref: /schemas/types.yaml#/definitions/uint32-array
     38    minItems: 1
     39    maxItems: 3
     40    items:
     41      minimum: 1
     42      maximum: 3
     43    description: >
     44      Specifies the ports unused using their port number. Do not describe this
     45      property if all ports have to be enabled.
     46
     47  initial-mode:
     48    $ref: /schemas/types.yaml#/definitions/uint32
     49    enum: [1, 2]
     50    description: >
     51      Specifies initial mode. 1 for Hub mode, 2 for standby mode.
     52
     53  clocks:
     54    maxItems: 1
     55    description: >
     56      Clock used for driving REFCLK signal. If not provided the driver assumes
     57      that clock signal is always available, its rate is specified by REF_SEL
     58      pins and a value from the primary reference clock frequencies table is
     59      used.
     60
     61  clock-names:
     62    const: refclk
     63
     64  refclk-frequency:
     65    $ref: /schemas/types.yaml#/definitions/uint32
     66    description: >
     67      Frequency of the REFCLK signal as defined by REF_SEL pins. If not
     68      provided, driver will not set rate of the REFCLK signal and assume that a
     69      value from the primary reference clock frequencies table is used.
     70
     71required:
     72  - compatible
     73
     74additionalProperties: false
     75
     76examples:
     77  - |
     78      i2c {
     79          #address-cells = <1>;
     80          #size-cells = <0>;
     81
     82          usb-hub@8 {
     83              compatible = "smsc,usb3503";
     84              reg = <0x08>;
     85              connect-gpios = <&gpx3 0 1>;
     86              disabled-ports = <2 3>;
     87              intn-gpios = <&gpx3 4 1>;
     88              reset-gpios = <&gpx3 5 1>;
     89              initial-mode = <1>;
     90              clocks = <&clks 80>;
     91              clock-names = "refclk";
     92          };
     93      };
     94
     95  - |
     96      #include <dt-bindings/gpio/gpio.h>
     97
     98      usb-hub {
     99          /* I2C is not connected */
    100          compatible = "smsc,usb3503";
    101          initial-mode = <1>; /* initialize in HUB mode */
    102          disabled-ports = <1>;
    103          intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
    104          reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
    105          connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
    106          refclk-frequency = <19200000>;
    107      };
    108
    109...