xilinx.txt (6679B)
1 d) Xilinx IP cores 2 3 The Xilinx EDK toolchain ships with a set of IP cores (devices) for use 4 in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range 5 of standard device types (network, serial, etc.) and miscellaneous 6 devices (gpio, LCD, spi, etc). Also, since these devices are 7 implemented within the fpga fabric every instance of the device can be 8 synthesised with different options that change the behaviour. 9 10 Each IP-core has a set of parameters which the FPGA designer can use to 11 control how the core is synthesized. Historically, the EDK tool would 12 extract the device parameters relevant to device drivers and copy them 13 into an 'xparameters.h' in the form of #define symbols. This tells the 14 device drivers how the IP cores are configured, but it requires the kernel 15 to be recompiled every time the FPGA bitstream is resynthesized. 16 17 The new approach is to export the parameters into the device tree and 18 generate a new device tree each time the FPGA bitstream changes. The 19 parameters which used to be exported as #defines will now become 20 properties of the device node. In general, device nodes for IP-cores 21 will take the following form: 22 23 (name): (generic-name)@(base-address) { 24 compatible = "xlnx,(ip-core-name)-(HW_VER)" 25 [, (list of compatible devices), ...]; 26 reg = <(baseaddr) (size)>; 27 interrupt-parent = <&interrupt-controller-phandle>; 28 interrupts = < ... >; 29 xlnx,(parameter1) = "(string-value)"; 30 xlnx,(parameter2) = <(int-value)>; 31 }; 32 33 (generic-name): an open firmware-style name that describes the 34 generic class of device. Preferably, this is one word, such 35 as 'serial' or 'ethernet'. 36 (ip-core-name): the name of the ip block (given after the BEGIN 37 directive in system.mhs). Should be in lowercase 38 and all underscores '_' converted to dashes '-'. 39 (name): is derived from the "PARAMETER INSTANCE" value. 40 (parameter#): C_* parameters from system.mhs. The C_ prefix is 41 dropped from the parameter name, the name is converted 42 to lowercase and all underscore '_' characters are 43 converted to dashes '-'. 44 (baseaddr): the baseaddr parameter value (often named C_BASEADDR). 45 (HW_VER): from the HW_VER parameter. 46 (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1). 47 48 Typically, the compatible list will include the exact IP core version 49 followed by an older IP core version which implements the same 50 interface or any other device with the same interface. 51 52 'reg' and 'interrupts' are all optional properties. 53 54 For example, the following block from system.mhs: 55 56 BEGIN opb_uartlite 57 PARAMETER INSTANCE = opb_uartlite_0 58 PARAMETER HW_VER = 1.00.b 59 PARAMETER C_BAUDRATE = 115200 60 PARAMETER C_DATA_BITS = 8 61 PARAMETER C_ODD_PARITY = 0 62 PARAMETER C_USE_PARITY = 0 63 PARAMETER C_CLK_FREQ = 50000000 64 PARAMETER C_BASEADDR = 0xEC100000 65 PARAMETER C_HIGHADDR = 0xEC10FFFF 66 BUS_INTERFACE SOPB = opb_7 67 PORT OPB_Clk = CLK_50MHz 68 PORT Interrupt = opb_uartlite_0_Interrupt 69 PORT RX = opb_uartlite_0_RX 70 PORT TX = opb_uartlite_0_TX 71 PORT OPB_Rst = sys_bus_reset_0 72 END 73 74 becomes the following device tree node: 75 76 opb_uartlite_0: serial@ec100000 { 77 device_type = "serial"; 78 compatible = "xlnx,opb-uartlite-1.00.b"; 79 reg = <ec100000 10000>; 80 interrupt-parent = <&opb_intc_0>; 81 interrupts = <1 0>; // got this from the opb_intc parameters 82 current-speed = <d#115200>; // standard serial device prop 83 clock-frequency = <d#50000000>; // standard serial device prop 84 xlnx,data-bits = <8>; 85 xlnx,odd-parity = <0>; 86 xlnx,use-parity = <0>; 87 }; 88 89 That covers the general approach to binding xilinx IP cores into the 90 device tree. The following are bindings for specific devices: 91 92 i) Xilinx ML300 Framebuffer 93 94 Simple framebuffer device from the ML300 reference design (also on the 95 ML403 reference design as well as others). 96 97 Optional properties: 98 - resolution = <xres yres> : pixel resolution of framebuffer. Some 99 implementations use a different resolution. 100 Default is <d#640 d#480> 101 - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory. 102 Default is <d#1024 d#480>. 103 - rotate-display (empty) : rotate display 180 degrees. 104 105 ii) Xilinx SystemACE 106 107 The Xilinx SystemACE device is used to program FPGAs from an FPGA 108 bitstream stored on a CF card. It can also be used as a generic CF 109 interface device. 110 111 Optional properties: 112 - 8-bit (empty) : Set this property for SystemACE in 8 bit mode 113 114 iii) Xilinx EMAC and Xilinx TEMAC 115 116 Xilinx Ethernet devices. In addition to general xilinx properties 117 listed above, nodes for these devices should include a phy-handle 118 property, and may include other common network device properties 119 like local-mac-address. 120 121 iv) Xilinx Uartlite 122 123 Xilinx uartlite devices are simple fixed speed serial ports. 124 125 Required properties: 126 - current-speed : Baud rate of uartlite 127 128 v) Xilinx hwicap 129 130 Xilinx hwicap devices provide access to the configuration logic 131 of the FPGA through the Internal Configuration Access Port 132 (ICAP). The ICAP enables partial reconfiguration of the FPGA, 133 readback of the configuration information, and some control over 134 'warm boots' of the FPGA fabric. 135 136 Required properties: 137 - xlnx,family : The family of the FPGA, necessary since the 138 capabilities of the underlying ICAP hardware 139 differ between different families. May be 140 'virtex2p', 'virtex4', or 'virtex5'. 141 - compatible : should contain "xlnx,xps-hwicap-1.00.a" or 142 "xlnx,opb-hwicap-1.00.b". 143 144 vi) Xilinx Uart 16550 145 146 Xilinx UART 16550 devices are very similar to the NS16550 but with 147 different register spacing and an offset from the base address. 148 149 Required properties: 150 - clock-frequency : Frequency of the clock input 151 - reg-offset : A value of 3 is required 152 - reg-shift : A value of 2 is required 153 154 vii) Xilinx USB Host controller 155 156 The Xilinx USB host controller is EHCI compatible but with a different 157 base address for the EHCI registers, and it is always a big-endian 158 USB Host controller. The hardware can be configured as high speed only, 159 or high speed/full speed hybrid. 160 161 Required properties: 162 - xlnx,support-usb-fs: A value 0 means the core is built as high speed 163 only. A value 1 means the core also supports 164 full speed devices. 165