BusLogic.rst (26438B)
1.. SPDX-License-Identifier: GPL-2.0 2 3========================================================= 4BusLogic MultiMaster and FlashPoint SCSI Driver for Linux 5========================================================= 6 7 Version 2.0.15 for Linux 2.0 8 9 Version 2.1.15 for Linux 2.1 10 11 PRODUCTION RELEASE 12 13 17 August 1998 14 15 Leonard N. Zubkoff 16 17 Dandelion Digital 18 19 lnz@dandelion.com 20 21 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> 22 23 24Introduction 25============ 26 27BusLogic, Inc. designed and manufactured a variety of high performance SCSI 28host adapters which share a common programming interface across a diverse 29collection of bus architectures by virtue of their MultiMaster ASIC technology. 30BusLogic was acquired by Mylex Corporation in February 1996, but the products 31supported by this driver originated under the BusLogic name and so that name is 32retained in the source code and documentation. 33 34This driver supports all present BusLogic MultiMaster Host Adapters, and should 35support any future MultiMaster designs with little or no modification. More 36recently, BusLogic introduced the FlashPoint Host Adapters, which are less 37costly and rely on the host CPU, rather than including an onboard processor. 38Despite not having an onboard CPU, the FlashPoint Host Adapters perform very 39well and have very low command latency. BusLogic has recently provided me with 40the FlashPoint Driver Developer's Kit, which comprises documentation and freely 41redistributable source code for the FlashPoint SCCB Manager. The SCCB Manager 42is the library of code that runs on the host CPU and performs functions 43analogous to the firmware on the MultiMaster Host Adapters. Thanks to their 44having provided the SCCB Manager, this driver now supports the FlashPoint Host 45Adapters as well. 46 47My primary goals in writing this completely new BusLogic driver for Linux are 48to achieve the full performance that BusLogic SCSI Host Adapters and modern 49SCSI peripherals are capable of, and to provide a highly robust driver that can 50be depended upon for high performance mission critical applications. All of 51the major performance features can be configured from the Linux kernel command 52line or at module initialization time, allowing individual installations to 53tune driver performance and error recovery to their particular needs. 54 55The latest information on Linux support for BusLogic SCSI Host Adapters, as 56well as the most recent release of this driver and the latest firmware for the 57BT-948/958/958D, will always be available from my Linux Home Page at URL 58"http://sourceforge.net/projects/dandelion/". 59 60Bug reports should be sent via electronic mail to "lnz@dandelion.com". Please 61include with the bug report the complete configuration messages reported by the 62driver and SCSI subsystem at startup, along with any subsequent system messages 63relevant to SCSI operations, and a detailed description of your system's 64hardware configuration. 65 66Mylex has been an excellent company to work with and I highly recommend their 67products to the Linux community. In November 1995, I was offered the 68opportunity to become a beta test site for their latest MultiMaster product, 69the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide 70Ultra SCSI Host Adapter in January 1996. This was mutually beneficial since 71Mylex received a degree and kind of testing that their own testing group cannot 72readily achieve, and the Linux community has available high performance host 73adapters that have been well tested with Linux even before being brought to 74market. This relationship has also given me the opportunity to interact 75directly with their technical staff, to understand more about the internal 76workings of their products, and in turn to educate them about the needs and 77potential of the Linux community. 78 79More recently, Mylex has reaffirmed the company's interest in supporting the 80Linux community, and I am now working on a Linux driver for the DAC960 PCI RAID 81Controllers. Mylex's interest and support is greatly appreciated. 82 83Unlike some other vendors, if you contact Mylex Technical Support with a 84problem and are running Linux, they will not tell you that your use of their 85products is unsupported. Their latest product marketing literature even states 86"Mylex SCSI host adapters are compatible with all major operating systems 87including: ... Linux ...". 88 89Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, California 9094555, USA and can be reached at 510/796-6100 or on the World Wide Web at 91http://www.mylex.com. Mylex HBA Technical Support can be reached by electronic 92mail at techsup@mylex.com, by Voice at 510/608-2400, or by FAX at 510/745-7715. 93Contact information for offices in Europe and Japan is available on the Web 94site. 95 96 97Driver Features 98=============== 99 100Configuration Reporting and Testing 101----------------------------------- 102 103 During system initialization, the driver reports extensively on the host 104 adapter hardware configuration, including the synchronous transfer parameters 105 requested and negotiated with each target device. AutoSCSI settings for 106 Synchronous Negotiation, Wide Negotiation, and Disconnect/Reconnect are 107 reported for each target device, as well as the status of Tagged Queuing. 108 If the same setting is in effect for all target devices, then a single word 109 or phrase is used; otherwise, a letter is provided for each target device to 110 indicate the individual status. The following examples 111 should clarify this reporting format: 112 113 Synchronous Negotiation: Ultra 114 115 Synchronous negotiation is enabled for all target devices and the host 116 adapter will attempt to negotiate for 20.0 mega-transfers/second. 117 118 Synchronous Negotiation: Fast 119 120 Synchronous negotiation is enabled for all target devices and the host 121 adapter will attempt to negotiate for 10.0 mega-transfers/second. 122 123 Synchronous Negotiation: Slow 124 125 Synchronous negotiation is enabled for all target devices and the host 126 adapter will attempt to negotiate for 5.0 mega-transfers/second. 127 128 Synchronous Negotiation: Disabled 129 130 Synchronous negotiation is disabled and all target devices are limited to 131 asynchronous operation. 132 133 Synchronous Negotiation: UFSNUUU#UUUUUUUU 134 135 Synchronous negotiation to Ultra speed is enabled for target devices 0 136 and 4 through 15, to Fast speed for target device 1, to Slow speed for 137 target device 2, and is not permitted to target device 3. The host 138 adapter's SCSI ID is represented by the "#". 139 140 The status of Wide Negotiation, Disconnect/Reconnect, and Tagged Queuing 141 are reported as "Enabled", Disabled", or a sequence of "Y" and "N" letters. 142 143Performance Features 144-------------------- 145 146 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so 147 support has been included in the driver to utilize tagged queuing with any 148 target devices that report having the tagged queuing capability. Tagged 149 queuing allows for multiple outstanding commands to be issued to each target 150 device or logical unit, and can improve I/O performance substantially. In 151 addition, BusLogic's Strict Round Robin Mode is used to optimize host adapter 152 performance, and scatter/gather I/O can support as many segments as can be 153 effectively utilized by the Linux I/O subsystem. Control over the use of 154 tagged queuing for each target device as well as individual selection of the 155 tagged queue depth is available through driver options provided on the kernel 156 command line or at module initialization time. By default, the queue depth 157 is determined automatically based on the host adapter's total queue depth and 158 the number, type, speed, and capabilities of the target devices found. In 159 addition, tagged queuing is automatically disabled whenever the host adapter 160 firmware version is known not to implement it correctly, or whenever a tagged 161 queue depth of 1 is selected. Tagged queuing is also disabled for individual 162 target devices if disconnect/reconnect is disabled for that device. 163 164Robustness Features 165------------------- 166 167 The driver implements extensive error recovery procedures. When the higher 168 level parts of the SCSI subsystem request that a timed out command be reset, 169 a selection is made between a full host adapter hard reset and SCSI bus reset 170 versus sending a bus device reset message to the individual target device 171 based on the recommendation of the SCSI subsystem. Error recovery strategies 172 are selectable through driver options individually for each target device, 173 and also include sending a bus device reset to the specific target device 174 associated with the command being reset, as well as suppressing error 175 recovery entirely to avoid perturbing an improperly functioning device. If 176 the bus device reset error recovery strategy is selected and sending a bus 177 device reset does not restore correct operation, the next command that is 178 reset will force a full host adapter hard reset and SCSI bus reset. SCSI bus 179 resets caused by other devices and detected by the host adapter are also 180 handled by issuing a soft reset to the host adapter and re-initialization. 181 Finally, if tagged queuing is active and more than one command reset occurs 182 in a 10 minute interval, or if a command reset occurs within the first 10 183 minutes of operation, then tagged queuing will be disabled for that target 184 device. These error recovery options improve overall system robustness by 185 preventing individual errant devices from causing the system as a whole to 186 lock up or crash, and thereby allowing a clean shutdown and restart after the 187 offending component is removed. 188 189PCI Configuration Support 190------------------------- 191 192 On PCI systems running kernels compiled with PCI BIOS support enabled, this 193 driver will interrogate the PCI configuration space and use the I/O port 194 addresses assigned by the system BIOS, rather than the ISA compatible I/O 195 port addresses. The ISA compatible I/O port address is then disabled by the 196 driver. On PCI systems it is also recommended that the AutoSCSI utility be 197 used to disable the ISA compatible I/O port entirely as it is not necessary. 198 The ISA compatible I/O port is disabled by default on the BT-948/958/958D. 199 200/proc File System Support 201------------------------- 202 203 Copies of the host adapter configuration information together with updated 204 data transfer and error recovery statistics are available through the 205 /proc/scsi/BusLogic/<N> interface. 206 207Shared Interrupts Support 208------------------------- 209 210 On systems that support shared interrupts, any number of BusLogic Host 211 Adapters may share the same interrupt request channel. 212 213 214Supported Host Adapters 215======================= 216 217The following list comprises the supported BusLogic SCSI Host Adapters as of 218the date of this document. It is recommended that anyone purchasing a BusLogic 219Host Adapter not in the following table contact the author beforehand to verify 220that it is or will be supported. 221 222FlashPoint Series PCI Host Adapters: 223 224======================= ============================================= 225FlashPoint LT (BT-930) Ultra SCSI-3 226FlashPoint LT (BT-930R) Ultra SCSI-3 with RAIDPlus 227FlashPoint LT (BT-920) Ultra SCSI-3 (BT-930 without BIOS) 228FlashPoint DL (BT-932) Dual Channel Ultra SCSI-3 229FlashPoint DL (BT-932R) Dual Channel Ultra SCSI-3 with RAIDPlus 230FlashPoint LW (BT-950) Wide Ultra SCSI-3 231FlashPoint LW (BT-950R) Wide Ultra SCSI-3 with RAIDPlus 232FlashPoint DW (BT-952) Dual Channel Wide Ultra SCSI-3 233FlashPoint DW (BT-952R) Dual Channel Wide Ultra SCSI-3 with RAIDPlus 234======================= ============================================= 235 236MultiMaster "W" Series Host Adapters: 237 238======= === ============================== 239BT-948 PCI Ultra SCSI-3 240BT-958 PCI Wide Ultra SCSI-3 241BT-958D PCI Wide Differential Ultra SCSI-3 242======= === ============================== 243 244MultiMaster "C" Series Host Adapters: 245 246======== ==== ============================== 247BT-946C PCI Fast SCSI-2 248BT-956C PCI Wide Fast SCSI-2 249BT-956CD PCI Wide Differential Fast SCSI-2 250BT-445C VLB Fast SCSI-2 251BT-747C EISA Fast SCSI-2 252BT-757C EISA Wide Fast SCSI-2 253BT-757CD EISA Wide Differential Fast SCSI-2 254======== ==== ============================== 255 256MultiMaster "S" Series Host Adapters: 257 258======= ==== ============================== 259BT-445S VLB Fast SCSI-2 260BT-747S EISA Fast SCSI-2 261BT-747D EISA Differential Fast SCSI-2 262BT-757S EISA Wide Fast SCSI-2 263BT-757D EISA Wide Differential Fast SCSI-2 264BT-742A EISA SCSI-2 (742A revision H) 265======= ==== ============================== 266 267MultiMaster "A" Series Host Adapters: 268 269======= ==== ============================== 270BT-742A EISA SCSI-2 (742A revisions A - G) 271======= ==== ============================== 272 273AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also 274supported by this driver. 275 276BusLogic SCSI Host Adapters are available packaged both as bare boards and as 277retail kits. The BT- model numbers above refer to the bare board packaging. 278The retail kit model numbers are found by replacing BT- with KT- in the above 279list. The retail kit includes the bare board and manual as well as cabling and 280driver media and documentation that are not provided with bare boards. 281 282 283FlashPoint Installation Notes 284============================= 285 286RAIDPlus Support 287---------------- 288 289 FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software 290 RAID. RAIDPlus is not supported on Linux, and there are no plans to support 291 it. The MD driver in Linux 2.0 provides for concatenation (LINEAR) and 292 striping (RAID-0), and support for mirroring (RAID-1), fixed parity (RAID-4), 293 and distributed parity (RAID-5) is available separately. The built-in Linux 294 RAID support is generally more flexible and is expected to perform better 295 than RAIDPlus, so there is little impetus to include RAIDPlus support in the 296 BusLogic driver. 297 298Enabling UltraSCSI Transfers 299---------------------------- 300 301 FlashPoint Host Adapters ship with their configuration set to "Factory 302 Default" settings that are conservative and do not allow for UltraSCSI speed 303 to be negotiated. This results in fewer problems when these host adapters 304 are installed in systems with cabling or termination that is not sufficient 305 for UltraSCSI operation, or where existing SCSI devices do not properly 306 respond to synchronous transfer negotiation for UltraSCSI speed. AutoSCSI 307 may be used to load "Optimum Performance" settings which allow UltraSCSI 308 speed to be negotiated with all devices, or UltraSCSI speed can be enabled on 309 an individual basis. It is recommended that SCAM be manually disabled after 310 the "Optimum Performance" settings are loaded. 311 312 313BT-948/958/958D Installation Notes 314================================== 315 316The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may 317require attention in some circumstances when installing Linux. 318 319PCI I/O Port Assignments 320------------------------ 321 322 When configured to factory default settings, the BT-948/958/958D will only 323 recognize the PCI I/O port assignments made by the motherboard's PCI BIOS. 324 The BT-948/958/958D will not respond to any of the ISA compatible I/O ports 325 that previous BusLogic SCSI Host Adapters respond to. This driver supports 326 the PCI I/O port assignments, so this is the preferred configuration. 327 However, if the obsolete BusLogic driver must be used for any reason, such as 328 a Linux distribution that does not yet use this driver in its boot kernel, 329 BusLogic has provided an AutoSCSI configuration option to enable a legacy ISA 330 compatible I/O port. 331 332 To enable this backward compatibility option, invoke the AutoSCSI utility via 333 Ctrl-B at system startup and select "Adapter Configuration", "View/Modify 334 Configuration", and then change the "ISA Compatible Port" setting from 335 "Disable" to "Primary" or "Alternate". Once this driver has been installed, 336 the "ISA Compatible Port" option should be set back to "Disable" to avoid 337 possible future I/O port conflicts. The older BT-946C/956C/956CD also have 338 this configuration option, but the factory default setting is "Primary". 339 340PCI Slot Scanning Order 341----------------------- 342 343 In systems with multiple BusLogic PCI Host Adapters, the order in which the 344 PCI slots are scanned may appear reversed with the BT-948/958/958D as 345 compared to the BT-946C/956C/956CD. For booting from a SCSI disk to work 346 correctly, it is necessary that the host adapter's BIOS and the kernel agree 347 on which disk is the boot device, which requires that they recognize the PCI 348 host adapters in the same order. The motherboard's PCI BIOS provides a 349 standard way of enumerating the PCI host adapters, which is used by the Linux 350 kernel. Some PCI BIOS implementations enumerate the PCI slots in order of 351 increasing bus number and device number, while others do so in the opposite 352 direction. 353 354 Unfortunately, Microsoft decided that Windows 95 would always enumerate the 355 PCI slots in order of increasing bus number and device number regardless of 356 the PCI BIOS enumeration, and requires that their scheme be supported by the 357 host adapter's BIOS to receive Windows 95 certification. Therefore, the 358 factory default settings of the BT-948/958/958D enumerate the host adapters 359 by increasing bus number and device number. To disable this feature, invoke 360 the AutoSCSI utility via Ctrl-B at system startup and select "Adapter 361 Configuration", "View/Modify Configuration", press Ctrl-F10, and then change 362 the "Use Bus And Device # For PCI Scanning Seq." option to OFF. 363 364 This driver will interrogate the setting of the PCI Scanning Sequence option 365 so as to recognize the host adapters in the same order as they are enumerated 366 by the host adapter's BIOS. 367 368Enabling UltraSCSI Transfers 369---------------------------- 370 371 The BT-948/958/958D ship with their configuration set to "Factory Default" 372 settings that are conservative and do not allow for UltraSCSI speed to be 373 negotiated. This results in fewer problems when these host adapters are 374 installed in systems with cabling or termination that is not sufficient for 375 UltraSCSI operation, or where existing SCSI devices do not properly respond 376 to synchronous transfer negotiation for UltraSCSI speed. AutoSCSI may be 377 used to load "Optimum Performance" settings which allow UltraSCSI speed to be 378 negotiated with all devices, or UltraSCSI speed can be enabled on an 379 individual basis. It is recommended that SCAM be manually disabled after the 380 "Optimum Performance" settings are loaded. 381 382 383Driver Options 384============== 385 386BusLogic Driver Options may be specified either via the Linux Kernel Command 387Line or via the Loadable Kernel Module Installation Facility. Driver Options 388for multiple host adapters may be specified either by separating the option 389strings by a semicolon, or by specifying multiple "BusLogic=" strings on the 390command line. Individual option specifications for a single host adapter are 391separated by commas. The Probing and Debugging Options apply to all host 392adapters whereas the remaining options apply individually only to the 393selected host adapter. 394 395The BusLogic Driver Probing Options comprise the following: 396 397NoProbe 398 399 The "NoProbe" option disables all probing and therefore no BusLogic Host 400 Adapters will be detected. 401 402NoProbePCI 403 404 The "NoProbePCI" options disables the interrogation of PCI Configuration 405 Space and therefore only ISA Multimaster Host Adapters will be detected, as 406 well as PCI Multimaster Host Adapters that have their ISA Compatible I/O 407 Port set to "Primary" or "Alternate". 408 409NoSortPCI 410 411 The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be 412 enumerated in the order provided by the PCI BIOS, ignoring any setting of 413 the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option. 414 415MultiMasterFirst 416 417 The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed 418 before FlashPoint Host Adapters. By default, if both FlashPoint and PCI 419 MultiMaster Host Adapters are present, this driver will probe for 420 FlashPoint Host Adapters first unless the BIOS primary disk is controlled 421 by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host 422 Adapters will be probed first. 423 424FlashPointFirst 425 426 The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed 427 before MultiMaster Host Adapters. 428 429The BusLogic Driver Tagged Queuing Options allow for explicitly specifying 430the Queue Depth and whether Tagged Queuing is permitted for each Target 431Device (assuming that the Target Device supports Tagged Queuing). The Queue 432Depth is the number of SCSI Commands that are allowed to be concurrently 433presented for execution (either to the Host Adapter or Target Device). Note 434that explicitly enabling Tagged Queuing may lead to problems; the option to 435enable or disable Tagged Queuing is provided primarily to allow disabling 436Tagged Queuing on Target Devices that do not implement it correctly. The 437following options are available: 438 439QueueDepth:<integer> 440 441 The "QueueDepth:" or QD:" option specifies the Queue Depth to use for all 442 Target Devices that support Tagged Queuing, as well as the maximum Queue 443 Depth for devices that do not support Tagged Queuing. If no Queue Depth 444 option is provided, the Queue Depth will be determined automatically based 445 on the Host Adapter's Total Queue Depth and the number, type, speed, and 446 capabilities of the detected Target Devices. Target Devices that 447 do not support Tagged Queuing always have their Queue Depth set to 448 BusLogic_UntaggedQueueDepth or BusLogic_UntaggedQueueDepthBB, unless a 449 lower Queue Depth option is provided. A Queue Depth of 1 automatically 450 disables Tagged Queuing. 451 452QueueDepth:[<integer>,<integer>...] 453 454 The "QueueDepth:[...]" or "QD:[...]" option specifies the Queue Depth 455 individually for each Target Device. If an <integer> is omitted, the 456 associated Target Device will have its Queue Depth selected automatically. 457 458TaggedQueuing:Default 459 460 The "TaggedQueuing:Default" or "TQ:Default" option permits Tagged Queuing 461 based on the firmware version of the BusLogic Host Adapter and based on 462 whether the Queue Depth allows queuing multiple commands. 463 464TaggedQueuing:Enable 465 466 The "TaggedQueuing:Enable" or "TQ:Enable" option enables Tagged Queuing for 467 all Target Devices on this Host Adapter, overriding any limitation that 468 would otherwise be imposed based on the Host Adapter firmware version. 469 470TaggedQueuing:Disable 471 472 The "TaggedQueuing:Disable" or "TQ:Disable" option disables Tagged Queuing 473 for all Target Devices on this Host Adapter. 474 475TaggedQueuing:<Target-Spec> 476 477 The "TaggedQueuing:<Target-Spec>" or "TQ:<Target-Spec>" option controls 478 Tagged Queuing individually for each Target Device. <Target-Spec> is a 479 sequence of "Y", "N", and "X" characters. "Y" enables Tagged Queuing, "N" 480 disables Tagged Queuing, and "X" accepts the default based on the firmware 481 version. The first character refers to Target Device 0, the second to 482 Target Device 1, and so on; if the sequence of "Y", "N", and "X" characters 483 does not cover all the Target Devices, unspecified characters are assumed 484 to be "X". 485 486The BusLogic Driver Miscellaneous Options comprise the following: 487 488BusSettleTime:<seconds> 489 490 The "BusSettleTime:" or "BST:" option specifies the Bus Settle Time in 491 seconds. The Bus Settle Time is the amount of time to wait between a Host 492 Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI 493 Commands. If unspecified, it defaults to BusLogic_DefaultBusSettleTime. 494 495InhibitTargetInquiry 496 497 The "InhibitTargetInquiry" option inhibits the execution of an Inquire 498 Target Devices or Inquire Installed Devices command on MultiMaster Host 499 Adapters. This may be necessary with some older Target Devices that do not 500 respond correctly when Logical Units above 0 are addressed. 501 502The BusLogic Driver Debugging Options comprise the following: 503 504TraceProbe 505 506 The "TraceProbe" option enables tracing of Host Adapter Probing. 507 508TraceHardwareReset 509 510 The "TraceHardwareReset" option enables tracing of Host Adapter Hardware 511 Reset. 512 513TraceConfiguration 514 515 The "TraceConfiguration" option enables tracing of Host Adapter 516 Configuration. 517 518TraceErrors 519 520 The "TraceErrors" option enables tracing of SCSI Commands that return an 521 error from the Target Device. The CDB and Sense Data will be printed for 522 each SCSI Command that fails. 523 524Debug 525 526 The "Debug" option enables all debugging options. 527 528The following examples demonstrate setting the Queue Depth for Target Devices 5291 and 2 on the first host adapter to 7 and 15, the Queue Depth for all Target 530Devices on the second host adapter to 31, and the Bus Settle Time on the 531second host adapter to 30 seconds. 532 533Linux Kernel Command Line:: 534 535 linux BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30 536 537LILO Linux Boot Loader (in /etc/lilo.conf):: 538 539 append = "BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30" 540 541INSMOD Loadable Kernel Module Installation Facility:: 542 543 insmod BusLogic.o \ 544 'BusLogic="QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"' 545 546 547.. Note:: 548 549 Module Utilities 2.1.71 or later is required for correct parsing 550 of driver options containing commas. 551 552 553Driver Installation 554=================== 555 556This distribution was prepared for Linux kernel version 2.0.35, but should be 557compatible with 2.0.4 or any later 2.0 series kernel. 558 559To install the new BusLogic SCSI driver, you may use the following commands, 560replacing "/usr/src" with wherever you keep your Linux kernel source tree:: 561 562 cd /usr/src 563 tar -xvzf BusLogic-2.0.15.tar.gz 564 mv README.* LICENSE.* BusLogic.[ch] FlashPoint.c linux/drivers/scsi 565 patch -p0 < BusLogic.patch (only for 2.0.33 and below) 566 cd linux 567 make config 568 make zImage 569 570Then install "arch/x86/boot/zImage" as your standard kernel, run lilo if 571appropriate, and reboot. 572 573 574BusLogic Announcements Mailing List 575=================================== 576 577The BusLogic Announcements Mailing List provides a forum for informing Linux 578users of new driver releases and other announcements regarding Linux support 579for BusLogic SCSI Host Adapters. To join the mailing list, send a message to 580"buslogic-announce-request@dandelion.com" with the line "subscribe" in the 581message body.