head.S (4476B)
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * ARC CPU startup Code 4 * 5 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) 6 * 7 * Vineetg: Dec 2007 8 * -Check if we are running on Simulator or on real hardware 9 * to skip certain things during boot on simulator 10 */ 11 12#include <linux/linkage.h> 13#include <asm/asm-offsets.h> 14#include <asm/entry.h> 15#include <asm/arcregs.h> 16#include <asm/cache.h> 17#include <asm/dsp-impl.h> 18#include <asm/irqflags.h> 19 20.macro CPU_EARLY_SETUP 21 22 ; Setting up Vectror Table (in case exception happens in early boot 23 sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] 24 25 ; Disable I-cache/D-cache if kernel so configured 26 lr r5, [ARC_REG_IC_BCR] 27 breq r5, 0, 1f ; I$ doesn't exist 28 lr r5, [ARC_REG_IC_CTRL] 29#ifdef CONFIG_ARC_HAS_ICACHE 30 bclr r5, r5, 0 ; 0 - Enable, 1 is Disable 31#else 32 bset r5, r5, 0 ; I$ exists, but is not used 33#endif 34 sr r5, [ARC_REG_IC_CTRL] 35 361: 37 lr r5, [ARC_REG_DC_BCR] 38 breq r5, 0, 1f ; D$ doesn't exist 39 lr r5, [ARC_REG_DC_CTRL] 40 bclr r5, r5, 6 ; Invalidate (discard w/o wback) 41#ifdef CONFIG_ARC_HAS_DCACHE 42 bclr r5, r5, 0 ; Enable (+Inv) 43#else 44 bset r5, r5, 0 ; Disable (+Inv) 45#endif 46 sr r5, [ARC_REG_DC_CTRL] 47 481: 49 50#ifdef CONFIG_ISA_ARCV2 51 ; Unaligned access is disabled at reset, so re-enable early as 52 ; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access 53 ; by default 54 lr r5, [status32] 55#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS 56 bset r5, r5, STATUS_AD_BIT 57#else 58 ; Although disabled at reset, bootloader might have enabled it 59 bclr r5, r5, STATUS_AD_BIT 60#endif 61 kflag r5 62 63#ifdef CONFIG_ARC_LPB_DISABLE 64 lr r5, [ARC_REG_LPB_BUILD] 65 breq r5, 0, 1f ; LPB doesn't exist 66 mov r5, 1 67 sr r5, [ARC_REG_LPB_CTRL] 681: 69#endif /* CONFIG_ARC_LPB_DISABLE */ 70 71 /* On HSDK, CCMs need to remapped super early */ 72#ifdef CONFIG_ARC_SOC_HSDK 73 mov r6, 0x60000000 74 lr r5, [ARC_REG_ICCM_BUILD] 75 breq r5, 0, 1f 76 sr r6, [ARC_REG_AUX_ICCM] 771: 78 lr r5, [ARC_REG_DCCM_BUILD] 79 breq r5, 0, 2f 80 sr r6, [ARC_REG_AUX_DCCM] 812: 82#endif /* CONFIG_ARC_SOC_HSDK */ 83 84#endif /* CONFIG_ISA_ARCV2 */ 85 86 ; Config DSP_CTRL properly, so kernel may use integer multiply, 87 ; multiply-accumulate, and divide operations 88 DSP_EARLY_INIT 89.endm 90 91 .section .init.text, "ax",@progbits 92 93;---------------------------------------------------------------- 94; Default Reset Handler (jumped into from Reset vector) 95; - Don't clobber r0,r1,r2 as they might have u-boot provided args 96; - Platforms can override this weak version if needed 97;---------------------------------------------------------------- 98WEAK(res_service) 99 j stext 100END(res_service) 101 102;---------------------------------------------------------------- 103; Kernel Entry point 104;---------------------------------------------------------------- 105ENTRY(stext) 106 107 CPU_EARLY_SETUP 108 109#ifdef CONFIG_SMP 110 GET_CPU_ID r5 111 cmp r5, 0 112 mov.nz r0, r5 113 bz .Lmaster_proceed 114 115 ; Non-Masters wait for Master to boot enough and bring them up 116 ; when they resume, tail-call to entry point 117 mov blink, @first_lines_of_secondary 118 j arc_platform_smp_wait_to_boot 119 120.Lmaster_proceed: 121#endif 122 123 ; Clear BSS before updating any globals 124 ; XXX: use ZOL here 125 mov r5, __bss_start 126 sub r6, __bss_stop, r5 127 lsr.f lp_count, r6, 2 128 lpnz 1f 129 st.ab 0, [r5, 4] 1301: 131 132 ; Uboot - kernel ABI 133 ; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2 134 ; r1 = magic number (always zero as of now) 135 ; r2 = pointer to uboot provided cmdline or external DTB in mem 136 ; These are handled later in handle_uboot_args() 137 st r0, [@uboot_tag] 138 st r1, [@uboot_magic] 139 st r2, [@uboot_arg] 140 141 ; setup "current" tsk and optionally cache it in dedicated r25 142 mov r9, @init_task 143 SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch 144 145 ; setup stack (fp, sp) 146 mov fp, 0 147 148 ; tsk->thread_info is really a PAGE, whose bottom hoists stack 149 GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output) 150 151 j start_kernel ; "C" entry point 152END(stext) 153 154#ifdef CONFIG_SMP 155;---------------------------------------------------------------- 156; First lines of code run by secondary before jumping to 'C' 157;---------------------------------------------------------------- 158 .section .text, "ax",@progbits 159ENTRY(first_lines_of_secondary) 160 161 ; setup per-cpu idle task as "current" on this CPU 162 ld r0, [@secondary_idle_tsk] 163 SET_CURR_TASK_ON_CPU r0, r1 164 165 ; setup stack (fp, sp) 166 mov fp, 0 167 168 ; set it's stack base to tsk->thread_info bottom 169 GET_TSK_STACK_BASE r0, sp 170 171 j start_kernel_secondary 172END(first_lines_of_secondary) 173#endif