am335x-icev2.dts (12699B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/* 7 * AM335x ICE V2 board 8 * http://www.ti.com/tool/tmdsice3359 9 */ 10 11/dts-v1/; 12 13#include "am33xx.dtsi" 14 15/ { 16 model = "TI AM3359 ICE-V2"; 17 compatible = "ti,am3359-icev2", "ti,am33xx"; 18 19 memory@80000000 { 20 device_type = "memory"; 21 reg = <0x80000000 0x10000000>; /* 256 MB */ 22 }; 23 24 chosen { 25 stdout-path = &uart3; 26 }; 27 28 vbat: fixedregulator0 { 29 compatible = "regulator-fixed"; 30 regulator-name = "vbat"; 31 regulator-min-microvolt = <5000000>; 32 regulator-max-microvolt = <5000000>; 33 regulator-boot-on; 34 }; 35 36 vtt_fixed: fixedregulator1 { 37 compatible = "regulator-fixed"; 38 regulator-name = "vtt"; 39 regulator-min-microvolt = <1500000>; 40 regulator-max-microvolt = <1500000>; 41 gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; 42 regulator-always-on; 43 regulator-boot-on; 44 enable-active-high; 45 }; 46 47 leds-iio { 48 status = "disabled"; 49 compatible = "gpio-leds"; 50 led-out0 { 51 label = "out0"; 52 gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; 53 default-state = "off"; 54 }; 55 56 led-out1 { 57 label = "out1"; 58 gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; 59 default-state = "off"; 60 }; 61 62 led-out2 { 63 label = "out2"; 64 gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; 65 default-state = "off"; 66 }; 67 68 led-out3 { 69 label = "out3"; 70 gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; 71 default-state = "off"; 72 }; 73 74 led-out4 { 75 label = "out4"; 76 gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; 77 default-state = "off"; 78 }; 79 80 led-out5 { 81 label = "out5"; 82 gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; 83 default-state = "off"; 84 }; 85 86 led-out6 { 87 label = "out6"; 88 gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; 89 default-state = "off"; 90 }; 91 92 led-out7 { 93 label = "out7"; 94 gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; 95 default-state = "off"; 96 }; 97 }; 98 99 /* Tricolor status LEDs */ 100 leds1 { 101 compatible = "gpio-leds"; 102 pinctrl-names = "default"; 103 pinctrl-0 = <&user_leds>; 104 105 led0 { 106 label = "status0:red:cpu0"; 107 gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; 108 default-state = "off"; 109 linux,default-trigger = "cpu0"; 110 }; 111 112 led1 { 113 label = "status0:green:usr"; 114 gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; 115 default-state = "off"; 116 }; 117 118 led2 { 119 label = "status0:yellow:usr"; 120 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 121 default-state = "off"; 122 }; 123 124 led3 { 125 label = "status1:red:mmc0"; 126 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; 127 default-state = "off"; 128 linux,default-trigger = "mmc0"; 129 }; 130 131 led4 { 132 label = "status1:green:usr"; 133 gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; 134 default-state = "off"; 135 }; 136 137 led5 { 138 label = "status1:yellow:usr"; 139 gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; 140 default-state = "off"; 141 }; 142 }; 143 gpio-decoder { 144 compatible = "gpio-decoder"; 145 gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>, 146 <&pca9536 2 GPIO_ACTIVE_HIGH>, 147 <&pca9536 1 GPIO_ACTIVE_HIGH>, 148 <&pca9536 0 GPIO_ACTIVE_HIGH>; 149 linux,axis = <0>; /* ABS_X */ 150 decoder-max-value = <9>; 151 }; 152}; 153 154&am33xx_pinmux { 155 user_leds: user_leds { 156 pinctrl-single,pins = < 157 AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */ 158 AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */ 159 AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */ 160 AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */ 161 AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */ 162 AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */ 163 >; 164 }; 165 166 mmc0_pins_default: mmc0_pins_default { 167 pinctrl-single,pins = < 168 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) 169 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) 170 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) 171 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) 172 AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) 173 AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) 174 >; 175 }; 176 177 i2c0_pins_default: i2c0_pins_default { 178 pinctrl-single,pins = < 179 AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) 180 AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) 181 >; 182 }; 183 184 spi0_pins_default: spi0_pins_default { 185 pinctrl-single,pins = < 186 AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) 187 AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) 188 AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) 189 AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) 190 AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0) 191 AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ 192 >; 193 }; 194 195 uart3_pins_default: uart3_pins_default { 196 pinctrl-single,pins = < 197 AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ 198 AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ 199 >; 200 }; 201 202 cpsw_default: cpsw_default { 203 pinctrl-single,pins = < 204 /* Slave 1, RMII mode */ 205 AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ 206 AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0) 207 AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) 208 AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) 209 AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ 210 AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ 211 AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ 212 AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */ 213 /* Slave 2, RMII mode */ 214 AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wait0.rmii2_crs_dv */ 215 AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_col.rmii2_refclk */ 216 AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a11.rmii2_rxd0 */ 217 AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a10.rmii2_rxd1 */ 218 AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wpn.rmii2_rxerr */ 219 AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a5.rmii2_txd0 */ 220 AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a4.rmii2_txd1 */ 221 AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a0.rmii2_txen */ 222 >; 223 }; 224 225 cpsw_sleep: cpsw_sleep { 226 pinctrl-single,pins = < 227 /* Slave 1 reset value */ 228 AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) 229 AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) 230 AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) 231 AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) 232 AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) 233 AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) 234 AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) 235 AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) 236 237 /* Slave 2 reset value */ 238 AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) 239 AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) 240 AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) 241 AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) 242 AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) 243 AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) 244 AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) 245 AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) 246 >; 247 }; 248 249 davinci_mdio_default: davinci_mdio_default { 250 pinctrl-single,pins = < 251 /* MDIO */ 252 AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) 253 AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) 254 >; 255 }; 256 257 davinci_mdio_sleep: davinci_mdio_sleep { 258 pinctrl-single,pins = < 259 /* MDIO reset value */ 260 AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) 261 AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) 262 >; 263 }; 264}; 265 266&i2c0 { 267 pinctrl-names = "default"; 268 pinctrl-0 = <&i2c0_pins_default>; 269 270 status = "okay"; 271 clock-frequency = <400000>; 272 273 tps: power-controller@2d { 274 reg = <0x2d>; 275 }; 276 277 tpic2810: gpio@60 { 278 compatible = "ti,tpic2810"; 279 reg = <0x60>; 280 gpio-controller; 281 #gpio-cells = <2>; 282 }; 283 284 pca9536: gpio@41 { 285 compatible = "ti,pca9536"; 286 reg = <0x41>; 287 gpio-controller; 288 #gpio-cells = <2>; 289 }; 290 291 /* osd9616p0899-10 */ 292 display@3c { 293 compatible = "solomon,ssd1306fb-i2c"; 294 reg = <0x3c>; 295 solomon,height = <16>; 296 solomon,width = <96>; 297 solomon,com-seq; 298 solomon,com-invdir; 299 solomon,page-offset = <0>; 300 solomon,prechargep1 = <2>; 301 solomon,prechargep2 = <13>; 302 }; 303}; 304 305&spi0 { 306 status = "okay"; 307 pinctrl-names = "default"; 308 pinctrl-0 = <&spi0_pins_default>; 309 310 sn65hvs882@1 { 311 compatible = "pisosr-gpio"; 312 gpio-controller; 313 #gpio-cells = <2>; 314 315 load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; 316 317 reg = <1>; 318 spi-max-frequency = <1000000>; 319 spi-cpol; 320 }; 321 322 spi_nor: flash@0 { 323 #address-cells = <1>; 324 #size-cells = <1>; 325 compatible = "winbond,w25q64", "jedec,spi-nor"; 326 spi-max-frequency = <80000000>; 327 m25p,fast-read; 328 reg = <0>; 329 330 partition@0 { 331 label = "u-boot-spl"; 332 reg = <0x0 0x80000>; 333 read-only; 334 }; 335 336 partition@1 { 337 label = "u-boot"; 338 reg = <0x80000 0x100000>; 339 read-only; 340 }; 341 342 partition@2 { 343 label = "u-boot-env"; 344 reg = <0x180000 0x20000>; 345 read-only; 346 }; 347 348 partition@3 { 349 label = "misc"; 350 reg = <0x1A0000 0x660000>; 351 }; 352 }; 353 354}; 355 356&tscadc { 357 status = "okay"; 358 adc { 359 ti,adc-channels = <1 2 3 4 5 6 7>; 360 }; 361}; 362 363#include "tps65910.dtsi" 364 365&tps { 366 vcc1-supply = <&vbat>; 367 vcc2-supply = <&vbat>; 368 vcc3-supply = <&vbat>; 369 vcc4-supply = <&vbat>; 370 vcc5-supply = <&vbat>; 371 vcc6-supply = <&vbat>; 372 vcc7-supply = <&vbat>; 373 vccio-supply = <&vbat>; 374 375 regulators { 376 vrtc_reg: regulator@0 { 377 regulator-always-on; 378 }; 379 380 vio_reg: regulator@1 { 381 regulator-always-on; 382 }; 383 384 vdd1_reg: regulator@2 { 385 regulator-name = "vdd_mpu"; 386 regulator-min-microvolt = <912500>; 387 regulator-max-microvolt = <1326000>; 388 regulator-boot-on; 389 regulator-always-on; 390 }; 391 392 vdd2_reg: regulator@3 { 393 regulator-name = "vdd_core"; 394 regulator-min-microvolt = <912500>; 395 regulator-max-microvolt = <1144000>; 396 regulator-boot-on; 397 regulator-always-on; 398 }; 399 400 vdd3_reg: regulator@4 { 401 regulator-always-on; 402 }; 403 404 vdig1_reg: regulator@5 { 405 regulator-always-on; 406 }; 407 408 vdig2_reg: regulator@6 { 409 regulator-always-on; 410 }; 411 412 vpll_reg: regulator@7 { 413 regulator-always-on; 414 }; 415 416 vdac_reg: regulator@8 { 417 regulator-always-on; 418 }; 419 420 vaux1_reg: regulator@9 { 421 regulator-always-on; 422 }; 423 424 vaux2_reg: regulator@10 { 425 regulator-always-on; 426 }; 427 428 vaux33_reg: regulator@11 { 429 regulator-always-on; 430 }; 431 432 vmmc_reg: regulator@12 { 433 regulator-min-microvolt = <1800000>; 434 regulator-max-microvolt = <3300000>; 435 regulator-always-on; 436 }; 437 }; 438}; 439 440&mmc1 { 441 status = "okay"; 442 vmmc-supply = <&vmmc_reg>; 443 bus-width = <4>; 444 pinctrl-names = "default"; 445 pinctrl-0 = <&mmc0_pins_default>; 446}; 447 448&gpio0_target { 449 /* Do not idle the GPIO used for holding the VTT regulator */ 450 ti,no-reset-on-init; 451 ti,no-idle-on-init; 452}; 453 454&uart3 { 455 pinctrl-names = "default"; 456 pinctrl-0 = <&uart3_pins_default>; 457 status = "okay"; 458}; 459 460&gpio3 { 461 pr1-mii-ctl-hog { 462 gpio-hog; 463 gpios = <4 GPIO_ACTIVE_HIGH>; 464 output-high; 465 line-name = "PR1_MII_CTRL"; 466 }; 467 468 mux-mii-hog { 469 gpio-hog; 470 gpios = <10 GPIO_ACTIVE_HIGH>; 471 /* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */ 472 output-high; 473 line-name = "MUX_MII_CTL1"; 474 }; 475}; 476 477&cpsw_port1 { 478 phy-handle = <ðphy0>; 479 phy-mode = "rmii"; 480 ti,dual-emac-pvid = <1>; 481}; 482 483&cpsw_port2 { 484 phy-handle = <ðphy1>; 485 phy-mode = "rmii"; 486 ti,dual-emac-pvid = <2>; 487}; 488 489&mac_sw { 490 pinctrl-names = "default", "sleep"; 491 pinctrl-0 = <&cpsw_default>; 492 pinctrl-1 = <&cpsw_sleep>; 493 status = "okay"; 494}; 495 496&davinci_mdio_sw { 497 pinctrl-names = "default", "sleep"; 498 pinctrl-0 = <&davinci_mdio_default>; 499 pinctrl-1 = <&davinci_mdio_sleep>; 500 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; 501 reset-delay-us = <2>; /* PHY datasheet states 1uS min */ 502 503 ethphy0: ethernet-phy@1 { 504 reg = <1>; 505 }; 506 507 ethphy1: ethernet-phy@3 { 508 reg = <3>; 509 }; 510}; 511 512&pruss_tm { 513 status = "okay"; 514}; 515 516&rtc { 517 system-power-controller; 518};