cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

am335x-pepper.dts (17037B)


      1// SPDX-License-Identifier: GPL-2.0-only
      2/*
      3 * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
      4 */
      5/dts-v1/;
      6
      7#include <dt-bindings/input/input.h>
      8#include "am33xx.dtsi"
      9
     10/ {
     11	model = "Gumstix Pepper";
     12	compatible = "gumstix,am335x-pepper", "ti,am33xx";
     13
     14	cpus {
     15		cpu@0 {
     16			cpu0-supply = <&dcdc3_reg>;
     17		};
     18	};
     19
     20	memory@80000000 {
     21		device_type = "memory";
     22		reg = <0x80000000 0x20000000>; /* 512 MB */
     23	};
     24
     25	buttons: user_buttons {
     26		compatible = "gpio-keys";
     27	};
     28
     29	leds: user_leds {
     30		compatible = "gpio-leds";
     31	};
     32
     33	panel: lcd_panel {
     34		compatible = "ti,tilcdc,panel";
     35	};
     36
     37	sound: sound_iface {
     38		compatible = "ti,da830-evm-audio";
     39	};
     40
     41	vbat: fixedregulator0 {
     42		compatible = "regulator-fixed";
     43	};
     44
     45	v3v3c_reg: fixedregulator1 {
     46		compatible = "regulator-fixed";
     47	};
     48
     49	vdd5_reg: fixedregulator2 {
     50		compatible = "regulator-fixed";
     51	};
     52};
     53
     54/* I2C Busses */
     55&i2c0 {
     56	status = "okay";
     57	pinctrl-names = "default";
     58	pinctrl-0 = <&i2c0_pins>;
     59
     60	clock-frequency = <400000>;
     61
     62	tps: tps@24 {
     63		reg = <0x24>;
     64	};
     65
     66	eeprom: eeprom@50 {
     67		compatible = "atmel,24c256";
     68		reg = <0x50>;
     69	};
     70
     71	audio_codec: tlv320aic3106@1b {
     72		compatible = "ti,tlv320aic3106";
     73		reg = <0x1b>;
     74		ai3x-micbias-vg = <0x2>;
     75	};
     76
     77	accel: lis331dlh@1d {
     78		compatible = "st,lis3lv02d";
     79		reg = <0x1d>;
     80	};
     81};
     82
     83&i2c1 {
     84	status = "okay";
     85	pinctrl-names = "default";
     86	pinctrl-0 = <&i2c1_pins>;
     87	clock-frequency = <400000>;
     88};
     89
     90&am33xx_pinmux {
     91	i2c0_pins: pinmux_i2c0 {
     92		pinctrl-single,pins = <
     93			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
     94			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
     95		>;
     96	};
     97	i2c1_pins: pinmux_i2c1 {
     98		pinctrl-single,pins = <
     99			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_crs,i2c1_sda */
    100			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
    101		>;
    102	};
    103};
    104
    105/* Accelerometer */
    106&accel {
    107	pinctrl-names = "default";
    108	pinctrl-0 = <&accel_pins>;
    109
    110	Vdd-supply = <&ldo3_reg>;
    111	Vdd_IO-supply = <&ldo3_reg>;
    112	st,irq1-click;
    113	st,wakeup-x-lo;
    114	st,wakeup-x-hi;
    115	st,wakeup-y-lo;
    116	st,wakeup-y-hi;
    117	st,wakeup-z-lo;
    118	st,wakeup-z-hi;
    119	st,min-limit-x = <92>;
    120	st,max-limit-x = <14>;
    121	st,min-limit-y = <14>;
    122	st,max-limit-y = <92>;
    123	st,min-limit-z = <92>;
    124	st,max-limit-z = <14>;
    125};
    126
    127&am33xx_pinmux {
    128	accel_pins: pinmux_accel {
    129		pinctrl-single,pins = <
    130			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7)   /* gpmc_wen.gpio2_4 */
    131		>;
    132	};
    133};
    134
    135/* Audio */
    136&audio_codec {
    137	status = "okay";
    138
    139	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
    140	AVDD-supply = <&ldo3_reg>;
    141	IOVDD-supply = <&ldo3_reg>;
    142	DRVDD-supply = <&ldo3_reg>;
    143	DVDD-supply = <&dcdc1_reg>;
    144};
    145
    146&sound {
    147	ti,model = "AM335x-EVM";
    148	ti,audio-codec = <&audio_codec>;
    149	ti,mcasp-controller = <&mcasp0>;
    150	ti,codec-clock-rate = <12000000>;
    151	ti,audio-routing =
    152		"Headphone Jack",	"HPLOUT",
    153		"Headphone Jack",	"HPROUT",
    154		"MIC3L",		"Mic3L Switch";
    155};
    156
    157&mcasp0 {
    158	status = "okay";
    159	pinctrl-names = "default";
    160	pinctrl-0 = <&audio_pins>;
    161
    162	op-mode = <0>;	/* MCASP_ISS_MODE */
    163	tdm-slots = <2>;
    164	serial-dir = <
    165		1 2 0 0
    166		0 0 0 0
    167		0 0 0 0
    168		0 0 0 0
    169	>;
    170	tx-num-evt = <1>;
    171	rx-num-evt = <1>;
    172};
    173
    174&am33xx_pinmux {
    175	audio_pins: pinmux_audio {
    176		pinctrl-single,pins = <
    177			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
    178			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
    179			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
    180			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
    181			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)
    182			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
    183		>;
    184	};
    185};
    186
    187/* Display: 24-bit LCD Screen */
    188&panel {
    189	status = "okay";
    190	pinctrl-names = "default";
    191	pinctrl-0 = <&lcd_pins>;
    192	panel-info {
    193		ac-bias = <255>;
    194		ac-bias-intrpt = <0>;
    195		dma-burst-sz = <16>;
    196		bpp = <32>;
    197		fdd = <0x80>;
    198		sync-edge = <0>;
    199		sync-ctrl = <1>;
    200		raster-order = <0>;
    201		fifo-th = <0>;
    202	};
    203	display-timings {
    204		native-mode = <&timing0>;
    205		timing0: 480x272 {
    206			clock-frequency = <18400000>;
    207			hactive = <480>;
    208			vactive = <272>;
    209			hfront-porch = <8>;
    210			hback-porch = <4>;
    211			hsync-len = <41>;
    212			vfront-porch = <4>;
    213			vback-porch = <2>;
    214			vsync-len = <10>;
    215			hsync-active = <1>;
    216			vsync-active = <1>;
    217		};
    218	};
    219};
    220
    221&lcdc {
    222	status = "okay";
    223};
    224
    225&am33xx_pinmux {
    226	lcd_pins: pinmux_lcd {
    227		pinctrl-single,pins = <
    228			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
    229			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
    230			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
    231			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
    232			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
    233			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
    234			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
    235			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
    236			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
    237			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
    238			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
    239			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
    240			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
    241			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
    242			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
    243			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
    244			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
    245			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
    246			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
    247			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
    248			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
    249			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
    250			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
    251			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
    252			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
    253			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
    254			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
    255			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
    256			/* Display Enable */
    257			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
    258		>;
    259	};
    260};
    261
    262/* Ethernet */
    263&cpsw_port1 {
    264	phy-handle = <&ethphy0>;
    265	phy-mode = "rgmii";
    266	ti,dual-emac-pvid = <1>;
    267};
    268
    269&cpsw_port2 {
    270	phy-handle = <&ethphy1>;
    271	phy-mode = "rgmii";
    272	ti,dual-emac-pvid = <2>;
    273};
    274
    275&davinci_mdio_sw {
    276	pinctrl-names = "default";
    277	pinctrl-0 = <&mdio_pins>;
    278
    279	ethphy0: ethernet-phy@0 {
    280		reg = <0>;
    281	};
    282
    283	ethphy1: ethernet-phy@1 {
    284		reg = <1>;
    285	};
    286};
    287
    288&mac_sw {
    289	status = "okay";
    290	pinctrl-names = "default";
    291	pinctrl-0 = <&ethernet_pins>;
    292};
    293
    294&am33xx_pinmux {
    295	ethernet_pins: pinmux_ethernet {
    296		pinctrl-single,pins = <
    297			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
    298			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
    299			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
    300			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
    301			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
    302			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
    303			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
    304			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
    305			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2)
    306			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2)
    307			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2)
    308			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2)
    309			/* ethernet interrupt */
    310			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
    311			/* ethernet PHY nReset */
    312			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* mii1_col.gpio3_0 */
    313		>;
    314	};
    315
    316	mdio_pins: pinmux_mdio {
    317		pinctrl-single,pins = <
    318			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
    319			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
    320		>;
    321	};
    322};
    323
    324/* MMC */
    325&mmc1 {
    326	/* Bootable SD card slot */
    327	status = "okay";
    328	vmmc-supply = <&ldo3_reg>;
    329	bus-width = <4>;
    330	pinctrl-names = "default";
    331	pinctrl-0 = <&sd_pins>;
    332	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
    333};
    334
    335&mmc2 {
    336	/* eMMC (not populated) on MMC #2 */
    337	status = "disabled";
    338	pinctrl-names = "default";
    339	pinctrl-0 = <&emmc_pins>;
    340	vmmc-supply = <&ldo3_reg>;
    341	bus-width = <8>;
    342	non-removable;
    343};
    344
    345&mmc3 {
    346	/* Wifi & Bluetooth on MMC #3 */
    347	status = "okay";
    348	pinctrl-names = "default";
    349	pinctrl-0 = <&wireless_pins>;
    350	vmmmc-supply = <&v3v3c_reg>;
    351	bus-width = <4>;
    352	non-removable;
    353	dmas = <&edma_xbar 12 0 1
    354		&edma_xbar 13 0 2>;
    355	dma-names = "tx", "rx";
    356};
    357
    358
    359&am33xx_pinmux {
    360	sd_pins: pinmux_sd_card {
    361		pinctrl-single,pins = <
    362			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
    363			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
    364			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
    365			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
    366			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
    367			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
    368			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
    369		>;
    370	};
    371	emmc_pins: pinmux_emmc {
    372		pinctrl-single,pins = <
    373			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
    374			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
    375			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
    376			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
    377			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
    378			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
    379			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
    380			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
    381			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
    382			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
    383			/* EMMC nReset */
    384			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
    385		>;
    386	};
    387	wireless_pins: pinmux_wireless {
    388		pinctrl-single,pins = <
    389			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
    390			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
    391			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
    392			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
    393			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
    394			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc1_clk */
    395			/* WLAN nReset */
    396			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
    397			/* WLAN nPower down */
    398			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
    399			/* 32kHz Clock */
    400			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
    401		>;
    402	};
    403};
    404
    405/* Power */
    406&vbat {
    407	regulator-name = "vbat";
    408	regulator-min-microvolt = <5000000>;
    409	regulator-max-microvolt = <5000000>;
    410};
    411
    412&v3v3c_reg {
    413	regulator-name = "v3v3c_reg";
    414	regulator-min-microvolt = <3300000>;
    415	regulator-max-microvolt = <3300000>;
    416	vin-supply = <&vbat>;
    417};
    418
    419&vdd5_reg {
    420	regulator-name = "vdd5_reg";
    421	regulator-min-microvolt = <5000000>;
    422	regulator-max-microvolt = <5000000>;
    423	vin-supply = <&vbat>;
    424};
    425
    426/include/ "tps65217.dtsi"
    427
    428&tps {
    429	backlight {
    430		isel = <1>; /* ISET1 */
    431		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
    432		default-brightness = <80>;
    433	};
    434
    435	regulators {
    436		dcdc1_reg: regulator@0 {
    437			/* VDD_1V8 system supply */
    438			regulator-always-on;
    439		};
    440
    441		dcdc2_reg: regulator@1 {
    442			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
    443			regulator-name = "vdd_core";
    444			regulator-min-microvolt = <925000>;
    445			regulator-max-microvolt = <1150000>;
    446			regulator-boot-on;
    447			regulator-always-on;
    448		};
    449
    450		dcdc3_reg: regulator@2 {
    451			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
    452			regulator-name = "vdd_mpu";
    453			regulator-min-microvolt = <925000>;
    454			regulator-max-microvolt = <1325000>;
    455			regulator-boot-on;
    456			regulator-always-on;
    457		};
    458
    459		ldo1_reg: regulator@3 {
    460			/* VRTC 1.8V always-on supply */
    461			regulator-name = "vrtc,vdds";
    462			regulator-always-on;
    463		};
    464
    465		ldo2_reg: regulator@4 {
    466			/* 3.3V rail */
    467			regulator-name = "vdd_3v3aux";
    468			regulator-always-on;
    469		};
    470
    471		ldo3_reg: regulator@5 {
    472			/* VDD_3V3A 3.3V rail */
    473			regulator-name = "vdd_3v3a";
    474			regulator-min-microvolt = <3300000>;
    475			regulator-max-microvolt = <3300000>;
    476		};
    477
    478		ldo4_reg: regulator@6 {
    479			/* VDD_3V3B 3.3V rail */
    480			regulator-name = "vdd_3v3b";
    481			regulator-always-on;
    482		};
    483	};
    484};
    485
    486/* SPI Busses */
    487&spi0 {
    488	status = "okay";
    489	pinctrl-names = "default";
    490	pinctrl-0 = <&spi0_pins>;
    491};
    492
    493&am33xx_pinmux {
    494	spi0_pins: pinmux_spi0 {
    495		pinctrl-single,pins = <
    496			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
    497			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
    498			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
    499			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
    500		>;
    501	};
    502};
    503
    504/* Touch Screen */
    505&tscadc {
    506	status = "okay";
    507	tsc {
    508		ti,wires = <4>;
    509		ti,x-plate-resistance = <200>;
    510		ti,coordinate-readouts = <5>;
    511		ti,wire-config = <0x00 0x11 0x22 0x33>;
    512	};
    513
    514	adc {
    515		ti,adc-channels = <4 5 6 7>;
    516	};
    517};
    518
    519/* UARTs */
    520&uart0 {
    521	/* Serial Console */
    522	status = "okay";
    523	pinctrl-names = "default";
    524	pinctrl-0 = <&uart0_pins>;
    525};
    526
    527&uart1 {
    528	/* Broken out to J6 header */
    529	status = "okay";
    530	pinctrl-names = "default";
    531	pinctrl-0 = <&uart1_pins>;
    532};
    533
    534&am33xx_pinmux {
    535	uart0_pins: pinmux_uart0 {
    536		pinctrl-single,pins = <
    537			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
    538			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
    539		>;
    540	};
    541	uart1_pins: pinmux_uart1 {
    542		pinctrl-single,pins = <
    543			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0)
    544			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
    545			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
    546			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
    547		>;
    548	};
    549};
    550
    551/* USB */
    552&usb {
    553	pinctrl-names = "default";
    554	pinctrl-0 = <&usb_pins>;
    555};
    556
    557&usb0 {
    558        dr_mode = "host";
    559};
    560
    561&usb1 {
    562        dr_mode = "host";
    563};
    564
    565&am33xx_pinmux {
    566	usb_pins: pinmux_usb {
    567		pinctrl-single,pins = <
    568			/* USB0 Over-Current (active low) */
    569			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
    570			/* USB1 Over-Current (active low) */
    571			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)	/* gpmc_a10.gpio1_26 */
    572		>;
    573	};
    574};
    575
    576/* User IO */
    577&leds {
    578	pinctrl-names = "default";
    579	pinctrl-0 = <&user_leds_pins>;
    580
    581	led0 {
    582		label = "pepper:user0:blue";
    583		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
    584		linux,default-trigger = "none";
    585		default-state = "off";
    586	};
    587
    588	led1 {
    589		label = "pepper:user1:red";
    590		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
    591		linux,default-trigger = "none";
    592		default-state = "off";
    593	};
    594};
    595
    596&buttons {
    597	pinctrl-names = "default";
    598	pinctrl-0 = <&user_buttons_pins>;
    599	#address-cells = <1>;
    600	#size-cells = <0>;
    601
    602	button0 {
    603		label = "home";
    604		linux,code = <KEY_HOME>;
    605		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
    606		wakeup-source;
    607	};
    608
    609	button1 {
    610		label = "menu";
    611		linux,code = <KEY_MENU>;
    612		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
    613		wakeup-source;
    614	};
    615
    616	buttons2 {
    617		label = "power";
    618		linux,code = <KEY_POWER>;
    619		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
    620		wakeup-source;
    621	};
    622};
    623
    624&am33xx_pinmux {
    625	user_leds_pins: pinmux_user_leds {
    626		pinctrl-single,pins = <
    627			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
    628			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
    629		>;
    630	};
    631
    632	user_buttons_pins: pinmux_user_buttons {
    633		pinctrl-single,pins = <
    634			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
    635			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a7.gpio1_21 */
    636			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio0_7 */
    637		>;
    638	};
    639};