am437x-gp-evm.dts (35478B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/* AM437x GP EVM */ 7 8/dts-v1/; 9 10#include "am4372.dtsi" 11#include <dt-bindings/pinctrl/am43xx.h> 12#include <dt-bindings/pwm/pwm.h> 13#include <dt-bindings/gpio/gpio.h> 14 15/ { 16 model = "TI AM437x GP EVM"; 17 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; 18 19 aliases { 20 display0 = &lcd0; 21 }; 22 23 chosen { 24 stdout-path = &uart0; 25 }; 26 27 evm_v3_3d: fixedregulator-v3_3d { 28 compatible = "regulator-fixed"; 29 regulator-name = "evm_v3_3d"; 30 regulator-min-microvolt = <3300000>; 31 regulator-max-microvolt = <3300000>; 32 enable-active-high; 33 }; 34 35 vtt_fixed: fixedregulator-vtt { 36 compatible = "regulator-fixed"; 37 regulator-name = "vtt_fixed"; 38 regulator-min-microvolt = <1500000>; 39 regulator-max-microvolt = <1500000>; 40 regulator-always-on; 41 regulator-boot-on; 42 enable-active-high; 43 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; 44 }; 45 46 vmmcwl_fixed: fixedregulator-mmcwl { 47 compatible = "regulator-fixed"; 48 regulator-name = "vmmcwl_fixed"; 49 regulator-min-microvolt = <1800000>; 50 regulator-max-microvolt = <1800000>; 51 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; 52 enable-active-high; 53 }; 54 55 lcd_bl: backlight { 56 compatible = "pwm-backlight"; 57 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; 58 brightness-levels = <0 51 53 56 62 75 101 152 255>; 59 default-brightness-level = <8>; 60 }; 61 62 matrix_keypad: matrix_keypad0 { 63 compatible = "gpio-matrix-keypad"; 64 debounce-delay-ms = <5>; 65 col-scan-delay-us = <2>; 66 67 pinctrl-names = "default", "sleep"; 68 pinctrl-0 = <&matrix_keypad_default>; 69 pinctrl-1 = <&matrix_keypad_sleep>; 70 71 wakeup-source; 72 73 row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ 74 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ 75 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ 76 77 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */ 78 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */ 79 80 linux,keymap = <0x00000201 /* P1 */ 81 0x00010202 /* P2 */ 82 0x01000067 /* UP */ 83 0x0101006a /* RIGHT */ 84 0x02000069 /* LEFT */ 85 0x0201006c>; /* DOWN */ 86 }; 87 88 lcd0: display { 89 compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; 90 label = "lcd"; 91 92 backlight = <&lcd_bl>; 93 94 port { 95 lcd_in: endpoint { 96 remote-endpoint = <&dpi_out>; 97 }; 98 }; 99 }; 100 101 /* fixed 12MHz oscillator */ 102 refclk: oscillator { 103 #clock-cells = <0>; 104 compatible = "fixed-clock"; 105 clock-frequency = <12000000>; 106 }; 107 108 /* fixed 32k external oscillator clock */ 109 clk_32k_rtc: clk_32k_rtc { 110 #clock-cells = <0>; 111 compatible = "fixed-clock"; 112 clock-frequency = <32768>; 113 }; 114 115 sound0: sound0 { 116 compatible = "simple-audio-card"; 117 simple-audio-card,name = "AM437x-GP-EVM"; 118 simple-audio-card,widgets = 119 "Headphone", "Headphone Jack", 120 "Line", "Line In"; 121 simple-audio-card,routing = 122 "Headphone Jack", "HPLOUT", 123 "Headphone Jack", "HPROUT", 124 "LINE1L", "Line In", 125 "LINE1R", "Line In"; 126 simple-audio-card,format = "dsp_b"; 127 simple-audio-card,bitclock-master = <&sound0_master>; 128 simple-audio-card,frame-master = <&sound0_master>; 129 simple-audio-card,bitclock-inversion; 130 131 simple-audio-card,cpu { 132 sound-dai = <&mcasp1>; 133 system-clock-frequency = <12000000>; 134 }; 135 136 sound0_master: simple-audio-card,codec { 137 sound-dai = <&tlv320aic3106>; 138 system-clock-frequency = <12000000>; 139 }; 140 }; 141 142 beeper: beeper { 143 compatible = "gpio-beeper"; 144 pinctrl-names = "default"; 145 pinctrl-0 = <&beeper_pins_default>; 146 pinctrl-1 = <&beeper_pins_sleep>; 147 gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; 148 }; 149}; 150 151&am43xx_pinmux { 152 pinctrl-names = "default", "sleep"; 153 pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>; 154 pinctrl-1 = <&wlan_pins_sleep>; 155 156 ddr3_vtt_toggle_default: ddr_vtt_toggle_default { 157 pinctrl-single,pins = < 158 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */ 159 >; 160 }; 161 162 i2c0_pins: i2c0_pins { 163 pinctrl-single,pins = < 164 AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 165 AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 166 >; 167 }; 168 169 i2c1_pins: i2c1_pins { 170 pinctrl-single,pins = < 171 AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ 172 AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ 173 >; 174 }; 175 176 mmc1_pins: pinmux_mmc1_pins { 177 pinctrl-single,pins = < 178 AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 179 >; 180 }; 181 182 ecap0_pins: backlight_pins { 183 pinctrl-single,pins = < 184 AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ 185 >; 186 }; 187 188 pixcir_ts_pins: pixcir_ts_pins { 189 pinctrl-single,pins = < 190 AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ 191 >; 192 }; 193 194 cpsw_default: cpsw_default { 195 pinctrl-single,pins = < 196 /* Slave 1 */ 197 AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ 198 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ 199 AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ 200 AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ 201 AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ 202 AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ 203 AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ 204 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ 205 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ 206 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ 207 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ 208 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ 209 >; 210 }; 211 212 cpsw_sleep: cpsw_sleep { 213 pinctrl-single,pins = < 214 /* Slave 1 reset value */ 215 AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) 216 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) 217 AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) 218 AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) 219 AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) 220 AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) 221 AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) 222 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) 223 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) 224 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) 225 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) 226 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) 227 >; 228 }; 229 230 davinci_mdio_default: davinci_mdio_default { 231 pinctrl-single,pins = < 232 /* MDIO */ 233 AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 234 AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 235 >; 236 }; 237 238 davinci_mdio_sleep: davinci_mdio_sleep { 239 pinctrl-single,pins = < 240 /* MDIO reset value */ 241 AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) 242 AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) 243 >; 244 }; 245 246 nand_flash_x8: nand_flash_x8 { 247 pinctrl-single,pins = < 248 AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ 249 AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ 250 AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ 251 AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ 252 AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ 253 AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ 254 AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ 255 AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ 256 AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ 257 AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ 258 AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ 259 AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ 260 AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ 261 AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ 262 AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ 263 >; 264 }; 265 266 dss_pins: dss_pins { 267 pinctrl-single,pins = < 268 AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ 269 AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) 270 AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1) 271 AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1) 272 AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1) 273 AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1) 274 AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1) 275 AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ 276 AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ 277 AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) 278 AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) 279 AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) 280 AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) 281 AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) 282 AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0) 283 AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) 284 AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) 285 AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) 286 AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) 287 AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) 288 AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) 289 AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) 290 AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) 291 AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ 292 AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ 293 AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ 294 AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ 295 AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ 296 297 >; 298 }; 299 300 display_mux_pins: display_mux_pins { 301 pinctrl-single,pins = < 302 /* GPIO 5_8 to select LCD / HDMI */ 303 AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7) 304 >; 305 }; 306 307 dcan0_default: dcan0_default_pins { 308 pinctrl-single,pins = < 309 AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ 310 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ 311 >; 312 }; 313 314 dcan0_sleep: dcan0_sleep_pins { 315 pinctrl-single,pins = < 316 AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ 317 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ 318 >; 319 }; 320 321 dcan1_default: dcan1_default_pins { 322 pinctrl-single,pins = < 323 AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ 324 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ 325 >; 326 }; 327 328 dcan1_sleep: dcan1_sleep_pins { 329 pinctrl-single,pins = < 330 AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ 331 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ 332 >; 333 }; 334 335 vpfe0_pins_default: vpfe0_pins_default { 336 pinctrl-single,pins = < 337 AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ 338 AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ 339 AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ 340 AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ 341 AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ 342 AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ 343 AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ 344 AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ 345 AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ 346 AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ 347 AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ 348 AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ 349 AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ 350 >; 351 }; 352 353 vpfe0_pins_sleep: vpfe0_pins_sleep { 354 pinctrl-single,pins = < 355 AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ 356 AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ 357 AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ 358 AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ 359 AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ 360 AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ 361 AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ 362 AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ 363 AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ 364 AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ 365 AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ 366 AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ 367 AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ 368 >; 369 }; 370 371 vpfe1_pins_default: vpfe1_pins_default { 372 pinctrl-single,pins = < 373 AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ 374 AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ 375 AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ 376 AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ 377 AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ 378 AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ 379 AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ 380 AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ 381 AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ 382 AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ 383 AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ 384 AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ 385 AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ 386 >; 387 }; 388 389 vpfe1_pins_sleep: vpfe1_pins_sleep { 390 pinctrl-single,pins = < 391 AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ 392 AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ 393 AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ 394 AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ 395 AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ 396 AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ 397 AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ 398 AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ 399 AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ 400 AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ 401 AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ 402 AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ 403 AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ 404 >; 405 }; 406 407 mmc3_pins_default: pinmux_mmc3_pins_default { 408 pinctrl-single,pins = < 409 AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ 410 AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ 411 AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ 412 AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ 413 AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ 414 AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ 415 >; 416 }; 417 418 mmc3_pins_sleep: pinmux_mmc3_pins_sleep { 419 pinctrl-single,pins = < 420 AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ 421 AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ 422 AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ 423 AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ 424 AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ 425 AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ 426 >; 427 }; 428 429 wlan_pins_default: pinmux_wlan_pins_default { 430 pinctrl-single,pins = < 431 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ 432 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ 433 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ 434 >; 435 }; 436 437 wlan_pins_sleep: pinmux_wlan_pins_sleep { 438 pinctrl-single,pins = < 439 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ 440 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ 441 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ 442 >; 443 }; 444 445 uart3_pins: uart3_pins { 446 pinctrl-single,pins = < 447 AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ 448 AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ 449 AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ 450 AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ 451 >; 452 }; 453 454 mcasp1_pins: mcasp1_pins { 455 pinctrl-single,pins = < 456 AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 457 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ 458 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 459 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ 460 >; 461 }; 462 463 mcasp1_sleep_pins: mcasp1_sleep_pins { 464 pinctrl-single,pins = < 465 AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) 466 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) 467 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) 468 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) 469 >; 470 }; 471 472 gpio0_pins: gpio0_pins { 473 pinctrl-single,pins = < 474 AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */ 475 >; 476 }; 477 478 emmc_pins_default: emmc_pins_default { 479 pinctrl-single,pins = < 480 AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ 481 AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ 482 AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ 483 AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ 484 AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ 485 AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ 486 AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ 487 AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ 488 AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ 489 AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ 490 >; 491 }; 492 493 emmc_pins_sleep: emmc_pins_sleep { 494 pinctrl-single,pins = < 495 AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */ 496 AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */ 497 AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */ 498 AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */ 499 AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ 500 AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ 501 AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ 502 AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ 503 AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ 504 AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ 505 >; 506 }; 507 508 beeper_pins_default: beeper_pins_default { 509 pinctrl-single,pins = < 510 AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ 511 >; 512 }; 513 514 beeper_pins_sleep: beeper_pins_sleep { 515 pinctrl-single,pins = < 516 AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* cam1_field.gpio4_12 */ 517 >; 518 }; 519 520 unused_pins: unused_pins { 521 pinctrl-single,pins = < 522 AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) 523 AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) 524 AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) 525 AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) 526 AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) 527 AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) 528 AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) 529 AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7) 530 AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7) 531 AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7) 532 AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7) 533 AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) 534 AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7) 535 AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7) 536 AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7) 537 AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7) 538 AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7) 539 AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7) 540 AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7) 541 AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7) 542 AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7) 543 AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7) 544 AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7) 545 AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7) 546 AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE) 547 AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN) 548 AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN) 549 AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7) 550 AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7) 551 AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7) 552 AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7) 553 AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7) 554 AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7) 555 AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7) 556 AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7) 557 AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7) 558 AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7) 559 AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7) 560 AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7) 561 AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7) 562 AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7) 563 AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7) 564 AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7) 565 AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7) 566 >; 567 }; 568 569 debugss_pins: pinmux_debugss_pins { 570 pinctrl-single,pins = < 571 AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN) 572 AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN) 573 AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN) 574 AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN) 575 AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN) 576 AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN) 577 AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN) 578 >; 579 }; 580 581 uart0_pins_default: uart0_pins_default { 582 pinctrl-single,pins = < 583 AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ 584 AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ 585 AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 586 AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ 587 >; 588 }; 589 590 uart0_pins_sleep: uart0_pins_sleep { 591 pinctrl-single,pins = < 592 AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */ 593 AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */ 594 AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 595 AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ 596 >; 597 }; 598 599 matrix_keypad_default: matrix_keypad_default { 600 pinctrl-single,pins = < 601 AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) 602 AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7) 603 AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) 604 AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) 605 >; 606 }; 607 608 matrix_keypad_sleep: matrix_keypad_sleep { 609 pinctrl-single,pins = < 610 AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7) 611 AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7) 612 AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) 613 AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) 614 >; 615 }; 616}; 617 618&uart0 { 619 status = "okay"; 620 pinctrl-names = "default", "sleep"; 621 pinctrl-0 = <&uart0_pins_default>; 622 pinctrl-1 = <&uart0_pins_sleep>; 623}; 624 625&i2c0 { 626 status = "okay"; 627 pinctrl-names = "default"; 628 pinctrl-0 = <&i2c0_pins>; 629 clock-frequency = <100000>; 630 631 tps65218: tps65218@24 { 632 reg = <0x24>; 633 compatible = "ti,tps65218"; 634 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */ 635 interrupt-controller; 636 #interrupt-cells = <2>; 637 638 dcdc1: regulator-dcdc1 { 639 regulator-name = "vdd_core"; 640 regulator-min-microvolt = <912000>; 641 regulator-max-microvolt = <1144000>; 642 regulator-boot-on; 643 regulator-always-on; 644 }; 645 646 dcdc2: regulator-dcdc2 { 647 regulator-name = "vdd_mpu"; 648 regulator-min-microvolt = <912000>; 649 regulator-max-microvolt = <1378000>; 650 regulator-boot-on; 651 regulator-always-on; 652 }; 653 654 dcdc3: regulator-dcdc3 { 655 regulator-name = "vdcdc3"; 656 regulator-boot-on; 657 regulator-always-on; 658 regulator-state-mem { 659 regulator-on-in-suspend; 660 }; 661 regulator-state-disk { 662 regulator-off-in-suspend; 663 }; 664 }; 665 666 dcdc5: regulator-dcdc5 { 667 regulator-name = "v1_0bat"; 668 regulator-min-microvolt = <1000000>; 669 regulator-max-microvolt = <1000000>; 670 regulator-boot-on; 671 regulator-always-on; 672 regulator-state-mem { 673 regulator-on-in-suspend; 674 }; 675 }; 676 677 dcdc6: regulator-dcdc6 { 678 regulator-name = "v1_8bat"; 679 regulator-min-microvolt = <1800000>; 680 regulator-max-microvolt = <1800000>; 681 regulator-boot-on; 682 regulator-always-on; 683 regulator-state-mem { 684 regulator-on-in-suspend; 685 }; 686 }; 687 688 ldo1: regulator-ldo1 { 689 regulator-min-microvolt = <1800000>; 690 regulator-max-microvolt = <1800000>; 691 regulator-boot-on; 692 regulator-always-on; 693 }; 694 }; 695 696 ov2659@30 { 697 compatible = "ovti,ov2659"; 698 reg = <0x30>; 699 700 clocks = <&refclk 0>; 701 clock-names = "xvclk"; 702 703 port { 704 ov2659_0: endpoint { 705 remote-endpoint = <&vpfe1_ep>; 706 link-frequencies = /bits/ 64 <70000000>; 707 }; 708 }; 709 }; 710}; 711 712&i2c1 { 713 status = "okay"; 714 pinctrl-names = "default"; 715 pinctrl-0 = <&i2c1_pins>; 716 pixcir_ts@5c { 717 compatible = "pixcir,pixcir_tangoc"; 718 pinctrl-names = "default"; 719 pinctrl-0 = <&pixcir_ts_pins>; 720 reg = <0x5c>; 721 722 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 723 724 /* 725 * 0x264 represents the offset of padconf register of 726 * gpio3_22 from am43xx_pinmux base. 727 */ 728 interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, 729 <&am43xx_pinmux 0x264>; 730 interrupt-names = "tsc", "wakeup"; 731 732 touchscreen-size-x = <1024>; 733 touchscreen-size-y = <600>; 734 wakeup-source; 735 }; 736 737 ov2659@30 { 738 compatible = "ovti,ov2659"; 739 reg = <0x30>; 740 741 clocks = <&refclk 0>; 742 clock-names = "xvclk"; 743 744 port { 745 ov2659_1: endpoint { 746 remote-endpoint = <&vpfe0_ep>; 747 link-frequencies = /bits/ 64 <70000000>; 748 }; 749 }; 750 }; 751 752 tlv320aic3106: tlv320aic3106@1b { 753 #sound-dai-cells = <0>; 754 compatible = "ti,tlv320aic3106"; 755 reg = <0x1b>; 756 status = "okay"; 757 758 /* Regulators */ 759 IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */ 760 AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ 761 DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ 762 DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */ 763 }; 764}; 765 766&epwmss0 { 767 status = "okay"; 768}; 769 770&tscadc { 771 status = "okay"; 772 773 adc { 774 ti,adc-channels = <0 1 2 3 4 5 6 7>; 775 }; 776}; 777 778&magadc { 779 status = "okay"; 780 781 adc { 782 ti,adc-channels = <0 1 2 3 4 5 6 7>; 783 }; 784}; 785 786&ecap0 { 787 status = "okay"; 788 pinctrl-names = "default"; 789 pinctrl-0 = <&ecap0_pins>; 790}; 791 792&gpio0 { 793 pinctrl-names = "default"; 794 pinctrl-0 = <&gpio0_pins>; 795 status = "okay"; 796 797 sel-emmc-nand-hog { 798 gpio-hog; 799 gpios = <23 GPIO_ACTIVE_HIGH>; 800 /* SelEMMCorNAND selects between eMMC and NAND: 801 * Low: NAND 802 * High: eMMC 803 * When changing this line make sure the newly 804 * selected device node is enabled and the previously 805 * selected device node is disabled. 806 */ 807 output-low; 808 line-name = "SelEMMCorNAND"; 809 }; 810}; 811 812&gpio1 { 813 status = "okay"; 814}; 815 816&gpio3 { 817 status = "okay"; 818}; 819 820&gpio4 { 821 status = "okay"; 822}; 823 824&gpio5_target { 825 ti,no-reset-on-init; 826}; 827 828&gpio5 { 829 pinctrl-names = "default"; 830 pinctrl-0 = <&display_mux_pins>; 831 status = "okay"; 832 833 sel-lcd-hdmi-hog { 834 /* 835 * SelLCDorHDMI selects between display and audio paths: 836 * Low: HDMI display with audio via HDMI 837 * High: LCD display with analog audio via aic3111 codec 838 */ 839 gpio-hog; 840 gpios = <8 GPIO_ACTIVE_HIGH>; 841 output-high; 842 line-name = "SelLCDorHDMI"; 843 }; 844}; 845 846&mmc1 { 847 status = "okay"; 848 vmmc-supply = <&evm_v3_3d>; 849 bus-width = <4>; 850 pinctrl-names = "default"; 851 pinctrl-0 = <&mmc1_pins>; 852 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 853}; 854 855/* eMMC sits on mmc2 */ 856&mmc2 { 857 /* 858 * When enabling eMMC, disable GPMC/NAND and set 859 * SelEMMCorNAND to output-high 860 */ 861 status = "disabled"; 862 vmmc-supply = <&evm_v3_3d>; 863 bus-width = <8>; 864 pinctrl-names = "default", "sleep"; 865 pinctrl-0 = <&emmc_pins_default>; 866 pinctrl-1 = <&emmc_pins_sleep>; 867 non-removable; 868}; 869 870&mmc3 { 871 status = "okay"; 872 /* these are on the crossbar and are outlined in the 873 xbar-event-map element */ 874 dmas = <&edma_xbar 30 0 1>, 875 <&edma_xbar 31 0 2>; 876 dma-names = "tx", "rx"; 877 vmmc-supply = <&vmmcwl_fixed>; 878 bus-width = <4>; 879 pinctrl-names = "default", "sleep"; 880 pinctrl-0 = <&mmc3_pins_default>; 881 pinctrl-1 = <&mmc3_pins_sleep>; 882 cap-power-off-card; 883 keep-power-in-suspend; 884 non-removable; 885 886 #address-cells = <1>; 887 #size-cells = <0>; 888 wlcore: wlcore@0 { 889 compatible = "ti,wl1835"; 890 reg = <2>; 891 interrupt-parent = <&gpio1>; 892 interrupts = <23 IRQ_TYPE_EDGE_RISING>; 893 }; 894}; 895 896&uart3 { 897 status = "okay"; 898 pinctrl-names = "default"; 899 pinctrl-0 = <&uart3_pins>; 900}; 901 902&usb2_phy1 { 903 status = "okay"; 904}; 905 906&usb1 { 907 dr_mode = "otg"; 908 status = "okay"; 909}; 910 911&usb2_phy2 { 912 status = "okay"; 913}; 914 915&usb2 { 916 dr_mode = "host"; 917 status = "okay"; 918}; 919 920&mac_sw { 921 pinctrl-names = "default", "sleep"; 922 pinctrl-0 = <&cpsw_default>; 923 pinctrl-1 = <&cpsw_sleep>; 924 status = "okay"; 925}; 926 927&davinci_mdio_sw { 928 pinctrl-names = "default", "sleep"; 929 pinctrl-0 = <&davinci_mdio_default>; 930 pinctrl-1 = <&davinci_mdio_sleep>; 931 932 ethphy0: ethernet-phy@0 { 933 reg = <0>; 934 }; 935}; 936 937&cpsw_port1 { 938 phy-handle = <ðphy0>; 939 phy-mode = "rgmii-rxid"; 940 ti,dual-emac-pvid = <1>; 941}; 942 943&cpsw_port2 { 944 status = "disabled"; 945}; 946 947&elm { 948 status = "okay"; 949}; 950 951&gpmc { 952 /* 953 * When enabling GPMC, disable eMMC and set 954 * SelEMMCorNAND to output-low 955 */ 956 status = "okay"; 957 pinctrl-names = "default"; 958 pinctrl-0 = <&nand_flash_x8>; 959 ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ 960 nand@0,0 { 961 compatible = "ti,omap2-nand"; 962 reg = <0 0 4>; /* device IO registers */ 963 interrupt-parent = <&gpmc>; 964 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ 965 <1 IRQ_TYPE_NONE>; /* termcount */ 966 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ 967 ti,nand-xfer-type = "prefetch-dma"; 968 ti,nand-ecc-opt = "bch16"; 969 ti,elm-id = <&elm>; 970 nand-bus-width = <8>; 971 gpmc,device-width = <1>; 972 gpmc,sync-clk-ps = <0>; 973 gpmc,cs-on-ns = <0>; 974 gpmc,cs-rd-off-ns = <40>; 975 gpmc,cs-wr-off-ns = <40>; 976 gpmc,adv-on-ns = <0>; 977 gpmc,adv-rd-off-ns = <25>; 978 gpmc,adv-wr-off-ns = <25>; 979 gpmc,we-on-ns = <0>; 980 gpmc,we-off-ns = <20>; 981 gpmc,oe-on-ns = <3>; 982 gpmc,oe-off-ns = <30>; 983 gpmc,access-ns = <30>; 984 gpmc,rd-cycle-ns = <40>; 985 gpmc,wr-cycle-ns = <40>; 986 gpmc,bus-turnaround-ns = <0>; 987 gpmc,cycle2cycle-delay-ns = <0>; 988 gpmc,clk-activation-ns = <0>; 989 gpmc,wr-access-ns = <40>; 990 gpmc,wr-data-mux-bus-ns = <0>; 991 /* MTD partition table */ 992 /* All SPL-* partitions are sized to minimal length 993 * which can be independently programmable. For 994 * NAND flash this is equal to size of erase-block */ 995 #address-cells = <1>; 996 #size-cells = <1>; 997 partition@0 { 998 label = "NAND.SPL"; 999 reg = <0x00000000 0x00040000>; 1000 }; 1001 partition@1 { 1002 label = "NAND.SPL.backup1"; 1003 reg = <0x00040000 0x00040000>; 1004 }; 1005 partition@2 { 1006 label = "NAND.SPL.backup2"; 1007 reg = <0x00080000 0x00040000>; 1008 }; 1009 partition@3 { 1010 label = "NAND.SPL.backup3"; 1011 reg = <0x000c0000 0x00040000>; 1012 }; 1013 partition@4 { 1014 label = "NAND.u-boot-spl-os"; 1015 reg = <0x00100000 0x00080000>; 1016 }; 1017 partition@5 { 1018 label = "NAND.u-boot"; 1019 reg = <0x00180000 0x00100000>; 1020 }; 1021 partition@6 { 1022 label = "NAND.u-boot-env"; 1023 reg = <0x00280000 0x00040000>; 1024 }; 1025 partition@7 { 1026 label = "NAND.u-boot-env.backup1"; 1027 reg = <0x002c0000 0x00040000>; 1028 }; 1029 partition@8 { 1030 label = "NAND.kernel"; 1031 reg = <0x00300000 0x00700000>; 1032 }; 1033 partition@9 { 1034 label = "NAND.file-system"; 1035 reg = <0x00a00000 0x1f600000>; 1036 }; 1037 }; 1038}; 1039 1040&dss { 1041 status = "okay"; 1042 1043 pinctrl-names = "default"; 1044 pinctrl-0 = <&dss_pins>; 1045 1046 port { 1047 dpi_out: endpoint { 1048 remote-endpoint = <&lcd_in>; 1049 data-lines = <24>; 1050 }; 1051 }; 1052}; 1053 1054&dcan0 { 1055 pinctrl-names = "default", "sleep"; 1056 pinctrl-0 = <&dcan0_default>; 1057 pinctrl-1 = <&dcan0_sleep>; 1058 status = "okay"; 1059}; 1060 1061&dcan1 { 1062 pinctrl-names = "default", "sleep"; 1063 pinctrl-0 = <&dcan1_default>; 1064 pinctrl-1 = <&dcan1_sleep>; 1065 status = "okay"; 1066}; 1067 1068&vpfe0 { 1069 status = "okay"; 1070 pinctrl-names = "default", "sleep"; 1071 pinctrl-0 = <&vpfe0_pins_default>; 1072 pinctrl-1 = <&vpfe0_pins_sleep>; 1073 1074 port { 1075 vpfe0_ep: endpoint { 1076 remote-endpoint = <&ov2659_1>; 1077 ti,am437x-vpfe-interface = <0>; 1078 bus-width = <8>; 1079 hsync-active = <0>; 1080 vsync-active = <0>; 1081 }; 1082 }; 1083}; 1084 1085&vpfe1 { 1086 status = "okay"; 1087 pinctrl-names = "default", "sleep"; 1088 pinctrl-0 = <&vpfe1_pins_default>; 1089 pinctrl-1 = <&vpfe1_pins_sleep>; 1090 1091 port { 1092 vpfe1_ep: endpoint { 1093 remote-endpoint = <&ov2659_0>; 1094 ti,am437x-vpfe-interface = <0>; 1095 bus-width = <8>; 1096 hsync-active = <0>; 1097 vsync-active = <0>; 1098 }; 1099 }; 1100}; 1101 1102&mcasp1 { 1103 #sound-dai-cells = <0>; 1104 pinctrl-names = "default", "sleep"; 1105 pinctrl-0 = <&mcasp1_pins>; 1106 pinctrl-1 = <&mcasp1_sleep_pins>; 1107 1108 status = "okay"; 1109 1110 op-mode = <0>; /* MCASP_IIS_MODE */ 1111 tdm-slots = <2>; 1112 /* 4 serializers */ 1113 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1114 0 0 1 2 1115 >; 1116 tx-num-evt = <32>; 1117 rx-num-evt = <32>; 1118}; 1119 1120&rtc { 1121 clocks = <&clk_32k_rtc>, <&clk_32768_ck>; 1122 clock-names = "ext-clk", "int-clk"; 1123 status = "okay"; 1124}; 1125 1126&cpu { 1127 cpu0-supply = <&dcdc2>; 1128}; 1129 1130&wkup_m3_ipc { 1131 ti,set-io-isolation; 1132 firmware-name = "am43x-evm-scale-data.bin"; 1133}; 1134 1135&pruss1_mdio { 1136 status = "disabled"; 1137};