arm-realview-eb.dtsi (11347B)
1/* 2 * Copyright 2016 Linaro Ltd 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a copy 5 * of this software and associated documentation files (the "Software"), to deal 6 * in the Software without restriction, including without limitation the rights 7 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 8 * copies of the Software, and to permit persons to whom the Software is 9 * furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 18 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 19 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 20 * THE SOFTWARE. 21 */ 22 23#include <dt-bindings/interrupt-controller/irq.h> 24#include <dt-bindings/gpio/gpio.h> 25 26/ { 27 #address-cells = <1>; 28 #size-cells = <1>; 29 compatible = "arm,realview-eb"; 30 31 chosen { }; 32 33 aliases { 34 serial0 = &serial0; 35 serial1 = &serial1; 36 serial2 = &serial2; 37 serial3 = &serial3; 38 i2c0 = &i2c; 39 }; 40 41 memory { 42 device_type = "memory"; 43 /* 128 MiB memory @ 0x0 */ 44 reg = <0x00000000 0x08000000>; 45 }; 46 47 /* The voltage to the MMC card is hardwired at 3.3V */ 48 vmmc: fixedregulator@0 { 49 compatible = "regulator-fixed"; 50 regulator-name = "vmmc"; 51 regulator-min-microvolt = <3300000>; 52 regulator-max-microvolt = <3300000>; 53 regulator-boot-on; 54 }; 55 56 xtal24mhz: xtal24mhz@24M { 57 #clock-cells = <0>; 58 compatible = "fixed-clock"; 59 clock-frequency = <24000000>; 60 }; 61 62 timclk: timclk@1M { 63 #clock-cells = <0>; 64 compatible = "fixed-factor-clock"; 65 clock-div = <24>; 66 clock-mult = <1>; 67 clocks = <&xtal24mhz>; 68 }; 69 70 mclk: mclk@24M { 71 #clock-cells = <0>; 72 compatible = "fixed-factor-clock"; 73 clock-div = <1>; 74 clock-mult = <1>; 75 clocks = <&xtal24mhz>; 76 }; 77 78 kmiclk: kmiclk@24M { 79 #clock-cells = <0>; 80 compatible = "fixed-factor-clock"; 81 clock-div = <1>; 82 clock-mult = <1>; 83 clocks = <&xtal24mhz>; 84 }; 85 86 sspclk: sspclk@24M { 87 #clock-cells = <0>; 88 compatible = "fixed-factor-clock"; 89 clock-div = <1>; 90 clock-mult = <1>; 91 clocks = <&xtal24mhz>; 92 }; 93 94 uartclk: uartclk@24M { 95 #clock-cells = <0>; 96 compatible = "fixed-factor-clock"; 97 clock-div = <1>; 98 clock-mult = <1>; 99 clocks = <&xtal24mhz>; 100 }; 101 102 wdogclk: wdogclk@24M { 103 #clock-cells = <0>; 104 compatible = "fixed-factor-clock"; 105 clock-div = <1>; 106 clock-mult = <1>; 107 clocks = <&xtal24mhz>; 108 }; 109 110 /* FIXME: this actually hangs off the PLL clocks */ 111 pclk: pclk@0 { 112 #clock-cells = <0>; 113 compatible = "fixed-clock"; 114 clock-frequency = <0>; 115 }; 116 117 flash0@40000000 { 118 /* 2 * 32MiB NOR Flash memory */ 119 compatible = "arm,versatile-flash", "cfi-flash"; 120 reg = <0x40000000 0x04000000>; 121 bank-width = <4>; 122 partitions { 123 compatible = "arm,arm-firmware-suite"; 124 }; 125 }; 126 127 flash1@44000000 { 128 /* 2 * 32MiB NOR Flash memory */ 129 compatible = "arm,versatile-flash", "cfi-flash"; 130 reg = <0x44000000 0x04000000>; 131 bank-width = <4>; 132 partitions { 133 compatible = "arm,arm-firmware-suite"; 134 }; 135 }; 136 137 /* SMSC LAN91C111 ethernet with PHY and EEPROM */ 138 ethernet: ethernet@4e000000 { 139 compatible = "smsc,lan91c111"; 140 reg = <0x4e000000 0x10000>; 141 /* 142 * This means the adapter can be accessed with 8, 16 or 143 * 32 bit reads/writes. 144 */ 145 reg-io-width = <7>; 146 }; 147 148 usb: usb@4f000000 { 149 compatible = "nxp,usb-isp1761"; 150 reg = <0x4f000000 0x20000>; 151 dr_mode = "peripheral"; 152 }; 153 154 bridge { 155 compatible = "ti,ths8134a", "ti,ths8134"; 156 #address-cells = <1>; 157 #size-cells = <0>; 158 159 ports { 160 #address-cells = <1>; 161 #size-cells = <0>; 162 163 port@0 { 164 reg = <0>; 165 166 vga_bridge_in: endpoint { 167 remote-endpoint = <&clcd_pads>; 168 }; 169 }; 170 171 port@1 { 172 reg = <1>; 173 174 vga_bridge_out: endpoint { 175 remote-endpoint = <&vga_con_in>; 176 }; 177 }; 178 }; 179 }; 180 181 vga { 182 compatible = "vga-connector"; 183 184 port { 185 vga_con_in: endpoint { 186 remote-endpoint = <&vga_bridge_out>; 187 }; 188 }; 189 }; 190 191 /* These peripherals are inside the FPGA */ 192 fpga { 193 #address-cells = <1>; 194 #size-cells = <1>; 195 compatible = "simple-bus"; 196 ranges; 197 198 syscon: syscon@10000000 { 199 compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd"; 200 reg = <0x10000000 0x1000>; 201 ranges = <0x0 0x10000000 0x1000>; 202 #address-cells = <1>; 203 #size-cells = <1>; 204 205 led@8,0 { 206 compatible = "register-bit-led"; 207 reg = <0x08 0x04>; 208 offset = <0x08>; 209 mask = <0x01>; 210 label = "versatile:0"; 211 linux,default-trigger = "heartbeat"; 212 default-state = "on"; 213 }; 214 led@8,1 { 215 compatible = "register-bit-led"; 216 reg = <0x08 0x04>; 217 offset = <0x08>; 218 mask = <0x02>; 219 label = "versatile:1"; 220 linux,default-trigger = "mmc0"; 221 default-state = "off"; 222 }; 223 led@8,2 { 224 compatible = "register-bit-led"; 225 reg = <0x08 0x04>; 226 offset = <0x08>; 227 mask = <0x04>; 228 label = "versatile:2"; 229 linux,default-trigger = "cpu0"; 230 default-state = "off"; 231 }; 232 led@8,3 { 233 compatible = "register-bit-led"; 234 reg = <0x08 0x04>; 235 offset = <0x08>; 236 mask = <0x08>; 237 label = "versatile:3"; 238 default-state = "off"; 239 }; 240 led@8,4 { 241 compatible = "register-bit-led"; 242 reg = <0x08 0x04>; 243 offset = <0x08>; 244 mask = <0x10>; 245 label = "versatile:4"; 246 default-state = "off"; 247 }; 248 led@8,5 { 249 compatible = "register-bit-led"; 250 reg = <0x08 0x04>; 251 offset = <0x08>; 252 mask = <0x20>; 253 label = "versatile:5"; 254 default-state = "off"; 255 }; 256 led@8,6 { 257 compatible = "register-bit-led"; 258 reg = <0x08 0x04>; 259 offset = <0x08>; 260 mask = <0x40>; 261 label = "versatile:6"; 262 default-state = "off"; 263 }; 264 led@8,7 { 265 compatible = "register-bit-led"; 266 reg = <0x08 0x04>; 267 offset = <0x08>; 268 mask = <0x80>; 269 label = "versatile:7"; 270 default-state = "off"; 271 }; 272 oscclk0: clock-controller@c { 273 compatible = "arm,syscon-icst307"; 274 reg = <0x0c 0x04>; 275 #clock-cells = <0>; 276 lock-offset = <0x20>; 277 vco-offset = <0x0C>; 278 clocks = <&xtal24mhz>; 279 }; 280 oscclk1: clock-controller@10 { 281 compatible = "arm,syscon-icst307"; 282 reg = <0x10 0x04>; 283 #clock-cells = <0>; 284 lock-offset = <0x20>; 285 vco-offset = <0x10>; 286 clocks = <&xtal24mhz>; 287 }; 288 oscclk2: clock-controller@14 { 289 compatible = "arm,syscon-icst307"; 290 reg = <0x14 0x04>; 291 #clock-cells = <0>; 292 lock-offset = <0x20>; 293 vco-offset = <0x14>; 294 clocks = <&xtal24mhz>; 295 }; 296 oscclk3: clock-controller@18 { 297 compatible = "arm,syscon-icst307"; 298 reg = <0x18 0x04>; 299 #clock-cells = <0>; 300 lock-offset = <0x20>; 301 vco-offset = <0x18>; 302 clocks = <&xtal24mhz>; 303 }; 304 oscclk4: clock-controller@1c { 305 compatible = "arm,syscon-icst307"; 306 reg = <0x1c 0x04>; 307 #clock-cells = <0>; 308 lock-offset = <0x20>; 309 vco-offset = <0x1c>; 310 clocks = <&xtal24mhz>; 311 }; 312 }; 313 314 i2c: i2c@10002000 { 315 #address-cells = <1>; 316 #size-cells = <0>; 317 compatible = "arm,versatile-i2c"; 318 reg = <0x10002000 0x1000>; 319 320 rtc@68 { 321 compatible = "dallas,ds1338"; 322 reg = <0x68>; 323 }; 324 }; 325 326 aaci: aaci@10004000 { 327 compatible = "arm,pl041", "arm,primecell"; 328 reg = <0x10004000 0x1000>; 329 clocks = <&pclk>; 330 clock-names = "apb_pclk"; 331 }; 332 333 mmc: mmcsd@10005000 { 334 compatible = "arm,pl18x", "arm,primecell"; 335 reg = <0x10005000 0x1000>; 336 337 /* Due to frequent FIFO overruns, use just 500 kHz */ 338 max-frequency = <500000>; 339 bus-width = <4>; 340 cap-sd-highspeed; 341 cap-mmc-highspeed; 342 clocks = <&mclk>, <&pclk>; 343 clock-names = "mclk", "apb_pclk"; 344 vmmc-supply = <&vmmc>; 345 cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; 346 wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; 347 }; 348 349 kmi0: kmi@10006000 { 350 compatible = "arm,pl050", "arm,primecell"; 351 reg = <0x10006000 0x1000>; 352 clocks = <&kmiclk>, <&pclk>; 353 clock-names = "KMIREFCLK", "apb_pclk"; 354 }; 355 356 kmi1: kmi@10007000 { 357 compatible = "arm,pl050", "arm,primecell"; 358 reg = <0x10007000 0x1000>; 359 clocks = <&kmiclk>, <&pclk>; 360 clock-names = "KMIREFCLK", "apb_pclk"; 361 }; 362 363 charlcd: fpga_charlcd: charlcd@10008000 { 364 compatible = "arm,versatile-lcd"; 365 reg = <0x10008000 0x1000>; 366 clocks = <&pclk>; 367 clock-names = "apb_pclk"; 368 }; 369 370 serial0: serial@10009000 { 371 compatible = "arm,pl011", "arm,primecell"; 372 reg = <0x10009000 0x1000>; 373 clocks = <&uartclk>, <&pclk>; 374 clock-names = "uartclk", "apb_pclk"; 375 }; 376 377 serial1: serial@1000a000 { 378 compatible = "arm,pl011", "arm,primecell"; 379 reg = <0x1000a000 0x1000>; 380 clocks = <&uartclk>, <&pclk>; 381 clock-names = "uartclk", "apb_pclk"; 382 }; 383 384 serial2: serial@1000b000 { 385 compatible = "arm,pl011", "arm,primecell"; 386 reg = <0x1000b000 0x1000>; 387 clocks = <&uartclk>, <&pclk>; 388 clock-names = "uartclk", "apb_pclk"; 389 }; 390 391 serial3: serial@1000c000 { 392 compatible = "arm,pl011", "arm,primecell"; 393 reg = <0x1000c000 0x1000>; 394 clocks = <&uartclk>, <&pclk>; 395 clock-names = "uartclk", "apb_pclk"; 396 }; 397 398 ssp: spi@1000d000 { 399 compatible = "arm,pl022", "arm,primecell"; 400 reg = <0x1000d000 0x1000>; 401 clocks = <&sspclk>, <&pclk>; 402 clock-names = "SSPCLK", "apb_pclk"; 403 }; 404 405 wdog: watchdog@10010000 { 406 compatible = "arm,sp805", "arm,primecell"; 407 reg = <0x10010000 0x1000>; 408 clocks = <&wdogclk>, <&pclk>; 409 clock-names = "wdog_clk", "apb_pclk"; 410 status = "disabled"; 411 }; 412 413 timer01: timer@10011000 { 414 compatible = "arm,sp804", "arm,primecell"; 415 reg = <0x10011000 0x1000>; 416 clocks = <&timclk>, <&timclk>, <&pclk>; 417 clock-names = "timer1", "timer2", "apb_pclk"; 418 }; 419 420 timer23: timer@10012000 { 421 compatible = "arm,sp804", "arm,primecell"; 422 reg = <0x10012000 0x1000>; 423 clocks = <&timclk>, <&timclk>, <&pclk>; 424 clock-names = "timer1", "timer2", "apb_pclk"; 425 }; 426 427 gpio0: gpio@10013000 { 428 compatible = "arm,pl061", "arm,primecell"; 429 reg = <0x10013000 0x1000>; 430 gpio-controller; 431 #gpio-cells = <2>; 432 interrupt-controller; 433 #interrupt-cells = <2>; 434 clocks = <&pclk>; 435 clock-names = "apb_pclk"; 436 }; 437 438 gpio1: gpio@10014000 { 439 compatible = "arm,pl061", "arm,primecell"; 440 reg = <0x10014000 0x1000>; 441 gpio-controller; 442 #gpio-cells = <2>; 443 interrupt-controller; 444 #interrupt-cells = <2>; 445 clocks = <&pclk>; 446 clock-names = "apb_pclk"; 447 }; 448 449 gpio2: gpio@10015000 { 450 compatible = "arm,pl061", "arm,primecell"; 451 reg = <0x10015000 0x1000>; 452 gpio-controller; 453 #gpio-cells = <2>; 454 interrupt-controller; 455 #interrupt-cells = <2>; 456 clocks = <&pclk>; 457 clock-names = "apb_pclk"; 458 }; 459 460 rtc: rtc@10017000 { 461 compatible = "arm,pl031", "arm,primecell"; 462 reg = <0x10017000 0x1000>; 463 clocks = <&pclk>; 464 clock-names = "apb_pclk"; 465 }; 466 467 clcd: clcd@10020000 { 468 compatible = "arm,pl111", "arm,primecell"; 469 reg = <0x10020000 0x1000>; 470 interrupt-names = "combined"; 471 clocks = <&oscclk0>, <&pclk>; 472 clock-names = "clcdclk", "apb_pclk"; 473 /* 1024x768 16bpp @65MHz works fine */ 474 max-memory-bandwidth = <95000000>; 475 476 port { 477 clcd_pads: endpoint { 478 remote-endpoint = <&vga_bridge_in>; 479 arm,pl11x,tft-r0g0b0-pads = <0 8 16>; 480 }; 481 }; 482 }; 483 }; 484};