cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

armada-xp-crs326-24g-2s.dtsi (2190B)

      1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
      2/*
      3 * Device Tree file for CRS326-24G-2S board
      4 *
      5 * Copyright (C) 2016 Allied Telesis Labs
      6 * Copyright (C) 2020 Sartura Ltd.
      7 *
      8 * Based on armada-xp-db.dts
      9 *
     10 * Note: this Device Tree assumes that the bootloader has remapped the
     11 * internal registers to 0xf1000000 (instead of the default
     12 * 0xd0000000). The 0xf1000000 is the default used by the recent,
     13 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
     14 * boards were delivered with an older version of the bootloader that
     15 * left internal registers mapped at 0xd0000000. If you are in this
     16 * situation, you should either update your bootloader (preferred
     17 * solution) or the below Device Tree should be adjusted.
     18 */
     19
     20/dts-v1/;
     21#include "armada-xp-98dx3236.dtsi"
     22
     23/ {
     24	model = "CRS326-24G-2S+";
     25	compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
     26
     27	chosen {
     28		bootargs = "console=ttyS0,115200 earlyprintk";
     29	};
     30
     31	memory {
     32		device_type = "memory";
     33		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
     34	};
     35};
     36
     37&L2 {
     38	arm,parity-enable;
     39	marvell,ecc-enable;
     40};
     41
     42&devbus_bootcs {
     43	status = "okay";
     44
     45	/* Device Bus parameters are required */
     46
     47	/* Read parameters */
     48	devbus,bus-width    = <16>;
     49	devbus,turn-off-ps  = <60000>;
     50	devbus,badr-skew-ps = <0>;
     51	devbus,acc-first-ps = <124000>;
     52	devbus,acc-next-ps  = <248000>;
     53	devbus,rd-setup-ps  = <0>;
     54	devbus,rd-hold-ps   = <0>;
     55
     56	/* Write parameters */
     57	devbus,sync-enable = <0>;
     58	devbus,wr-high-ps  = <60000>;
     59	devbus,wr-low-ps   = <60000>;
     60	devbus,ale-wr-ps   = <60000>;
     61};
     62
     63&uart0 {
     64	status = "okay";
     65};
     66
     67&uart1 {
     68	status = "okay";
     69};
     70
     71&i2c0 {
     72	clock-frequency = <100000>;
     73	status = "okay";
     74};
     75
     76&usb0 {
     77	status = "okay";
     78};
     79
     80&spi0 {
     81	status = "okay";
     82
     83	flash@0 {
     84		#address-cells = <1>;
     85		#size-cells = <1>;
     86		compatible = "jedec,spi-nor";
     87		reg = <0>; /* Chip select 0 */
     88		spi-max-frequency = <108000000>;
     89		m25p,fast-read;
     90
     91		partition@u-boot {
     92			reg = <0x00000000 0x001f0000>;
     93			label = "u-boot";
     94		};
     95		partition@u-boot-env {
     96			reg = <0x001f0000 0x00010000>;
     97			label = "u-boot-env";
     98		};
     99		partition@ubi1 {
    100			reg = <0x00200000 0x00e00000>;
    101			label = "ubi1";
    102		};
    103	};
    104};