aspeed-bmc-asrock-romed8hm3.dts (5461B)
1// SPDX-License-Identifier: GPL-2.0+ 2/dts-v1/; 3 4#include "aspeed-g5.dtsi" 5#include <dt-bindings/gpio/aspeed-gpio.h> 6#include <dt-bindings/interrupt-controller/irq.h> 7 8/{ 9 model = "ASRock ROMED8HM3 BMC v1.00"; 10 compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500"; 11 12 aliases { 13 serial4 = &uart5; 14 }; 15 16 chosen { 17 stdout-path = &uart5; 18 bootargs = "console=tty0 console=ttyS4,115200 earlycon"; 19 }; 20 21 memory@80000000 { 22 reg = <0x80000000 0x20000000>; 23 }; 24 25 leds { 26 compatible = "gpio-leds"; 27 28 heartbeat { 29 gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; 30 linux,default-trigger = "timer"; 31 }; 32 33 system-fault { 34 gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; 35 panic-indicator; 36 }; 37 }; 38 39 iio-hwmon { 40 compatible = "iio-hwmon"; 41 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, 42 <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, 43 <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, 44 <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; 45 }; 46}; 47 48&fmc { 49 status = "okay"; 50 flash@0 { 51 status = "okay"; 52 m25p,fast-read; 53 label = "bmc"; 54 spi-max-frequency = <100000000>; /* 100 MHz */ 55#include "openbmc-flash-layout-64.dtsi" 56 }; 57}; 58 59&uart5 { 60 status = "okay"; 61}; 62 63&vuart { 64 status = "okay"; 65 aspeed,lpc-io-reg = <0x2f8>; 66 aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; 67}; 68 69&mac0 { 70 status = "okay"; 71 72 pinctrl-names = "default"; 73 pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; 74}; 75 76&i2c0 { 77 status = "okay"; 78 79 /* inlet temp sensor */ 80 w83773g@4c { 81 compatible = "nuvoton,w83773g"; 82 reg = <0x4c>; 83 }; 84}; 85 86&i2c1 { 87 status = "okay"; 88}; 89 90&i2c2 { 91 status = "okay"; 92 93 /* IPB temp sensor */ 94 w83773g@4c { 95 compatible = "nuvoton,w83773g"; 96 reg = <0x4c>; 97 }; 98 99 /* IPB PMIC */ 100 lm25066@40 { 101 compatible = "lm25066"; 102 reg = <0x40>; 103 shunt-resistor-micro-ohms = <1000>; 104 }; 105 106 /* 12VSB PMIC */ 107 lm25066@41 { 108 compatible = "lm25066"; 109 reg = <0x41>; 110 shunt-resistor-micro-ohms = <10000>; 111 }; 112}; 113 114&i2c4 { 115 status = "okay"; 116}; 117 118&i2c5 { 119 status = "okay"; 120}; 121 122&i2c6 { 123 status = "okay"; 124}; 125 126&i2c7 { 127 status = "okay"; 128 129 /* Baseboard FRU eeprom */ 130 eeprom@50 { 131 compatible = "st,24c128", "atmel,24c128"; 132 reg = <0x50>; 133 pagesize = <16>; 134 }; 135}; 136 137&i2c8 { 138 status = "okay"; 139}; 140 141&i2c9 { 142 status = "okay"; 143}; 144 145&video { 146 status = "okay"; 147}; 148 149&vhub { 150 status = "okay"; 151}; 152 153&lpc_ctrl { 154 status = "okay"; 155}; 156 157&lpc_snoop { 158 status = "okay"; 159 snoop-ports = <0x80>; 160}; 161 162&kcs3 { 163 status = "okay"; 164 aspeed,lpc-io-reg = <0xca2>; 165}; 166 167&pwm_tacho { 168 status = "okay"; 169 pinctrl-names = "default"; 170 pinctrl-0 = <&pinctrl_pwm3_default 171 &pinctrl_pwm4_default 172 &pinctrl_pwm5_default 173 &pinctrl_pwm6_default>; 174 175 fan@3 { 176 reg = <0x03>; 177 aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>; 178 }; 179 180 fan@4 { 181 reg = <0x04>; 182 aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>; 183 }; 184 185 fan@5 { 186 reg = <0x05>; 187 aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>; 188 }; 189 190 fan@6 { 191 reg = <0x06>; 192 aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>; 193 }; 194}; 195 196&gpio { 197 status = "okay"; 198 gpio-line-names = 199 /* A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI", 200 "", "", "", "", 201 /* B */ "POST_COMPLETE_N", "", "", "", "", "", "", "", 202 /* C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "", 203 /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", 204 "", "", "", "PSU_FAN_FAIL_N", 205 /* E */ "", "", "", "", "", "", "", "", 206 /* F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2", 207 "PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG", 208 /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2", 209 "BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N", 210 /* H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N", 211 "FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", 212 /* I */ "", "", "", "", "", "", "", "", 213 /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N", 214 "", "", "", "", 215 /* K */ "", "", "", "", "", "", "", "", 216 /* L */ "", "", "", "", "", "", "", "", 217 /* M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN", 218 "MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN", 219 /* N */ "", "", "", "", "", "", "", "", 220 /* O */ "", "", "", "", "", "", "", "", 221 /* P */ "", "", "", "", "", "", "", "", 222 /* Q */ "", "", "", "", 223 "BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N", 224 "BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N", 225 /* R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "", 226 /* S */ "", "", "", "", "", "", "", "", 227 /* T */ "", "", "", "", "", "", "", "", 228 /* U */ "", "", "", "", "", "", "", "", 229 /* V */ "", "", "", "", "", "", "", "", 230 /* W */ "", "", "", "", "", "", "", "", 231 /* X */ "", "", "", "", "", "", "", "", 232 /* Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "", 233 /* Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N", 234 "", "", "", "", 235 /* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "", 236 "", "", "", "", 237 /* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N", 238 "", "", "", "", 239 /* AC */ "", "", "", "", "", "", "", ""; 240}; 241 242&adc { 243 status = "okay"; 244 pinctrl-names = "default"; 245 pinctrl-0 = <&pinctrl_adc0_default 246 &pinctrl_adc1_default 247 &pinctrl_adc2_default 248 &pinctrl_adc3_default 249 &pinctrl_adc4_default 250 &pinctrl_adc5_default 251 &pinctrl_adc6_default 252 &pinctrl_adc7_default 253 &pinctrl_adc8_default 254 &pinctrl_adc9_default 255 &pinctrl_adc10_default 256 &pinctrl_adc11_default 257 &pinctrl_adc12_default 258 &pinctrl_adc13_default 259 &pinctrl_adc14_default 260 &pinctrl_adc15_default>; 261};