aspeed-bmc-facebook-cloudripper.dts (8638B)
1// SPDX-License-Identifier: GPL-2.0+ 2// Copyright (c) 2020 Facebook Inc. 3 4/dts-v1/; 5 6#include <dt-bindings/leds/common.h> 7#include "ast2600-facebook-netbmc-common.dtsi" 8 9/ { 10 model = "Facebook Cloudripper BMC"; 11 compatible = "facebook,cloudripper-bmc", "aspeed,ast2600"; 12 13 aliases { 14 /* 15 * PCA9548 (1-0070) provides 8 channels connecting to 16 * SMB (Switch Main Board). 17 */ 18 i2c16 = &imux16; 19 i2c17 = &imux17; 20 i2c18 = &imux18; 21 i2c19 = &imux19; 22 i2c20 = &imux20; 23 i2c21 = &imux21; 24 i2c22 = &imux22; 25 i2c23 = &imux23; 26 27 /* 28 * PCA9548 (2-0070) provides 8 channels connecting to 29 * SCM (System Controller Module). 30 */ 31 i2c24 = &imux24; 32 i2c25 = &imux25; 33 i2c26 = &imux26; 34 i2c27 = &imux27; 35 i2c28 = &imux28; 36 i2c29 = &imux29; 37 i2c30 = &imux30; 38 i2c31 = &imux31; 39 40 /* 41 * PCA9548 (3-0070) provides 8 channels connecting to 42 * SMB (Switch Main Board). 43 */ 44 i2c32 = &imux32; 45 i2c33 = &imux33; 46 i2c34 = &imux34; 47 i2c35 = &imux35; 48 i2c36 = &imux36; 49 i2c37 = &imux37; 50 i2c38 = &imux38; 51 i2c39 = &imux39; 52 53 /* 54 * PCA9548 (8-0070) provides 8 channels connecting to 55 * PDB (Power Delivery Board). 56 */ 57 i2c40 = &imux40; 58 i2c41 = &imux41; 59 i2c42 = &imux42; 60 i2c43 = &imux43; 61 i2c44 = &imux44; 62 i2c45 = &imux45; 63 i2c46 = &imux46; 64 i2c47 = &imux47; 65 66 /* 67 * PCA9548 (15-0076) provides 8 channels connecting to 68 * FCM (Fan Controller Module). 69 */ 70 i2c48 = &imux48; 71 i2c49 = &imux49; 72 i2c50 = &imux50; 73 i2c51 = &imux51; 74 i2c52 = &imux52; 75 i2c53 = &imux53; 76 i2c54 = &imux54; 77 i2c55 = &imux55; 78 }; 79 80 spi_gpio: spi-gpio { 81 num-chipselects = <2>; 82 cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, 83 <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>; 84 85 eeprom@1 { 86 compatible = "atmel,at93c46d"; 87 spi-max-frequency = <250000>; 88 data-size = <16>; 89 spi-cs-high; 90 reg = <1>; 91 }; 92 }; 93}; 94 95&ehci1 { 96 status = "okay"; 97}; 98 99/* 100 * "mdio1" is connected to the MDC/MDIO interface of the on-board 101 * management switch (whose ports are connected to BMC, Host and front 102 * panel ethernet port). 103 */ 104&mdio1 { 105 status = "okay"; 106}; 107 108&mdio3 { 109 status = "okay"; 110 111 ethphy1: ethernet-phy@13 { 112 compatible = "ethernet-phy-ieee802.3-c22"; 113 reg = <0x0d>; 114 }; 115}; 116 117&mac3 { 118 status = "okay"; 119 phy-mode = "rgmii"; 120 phy-handle = <ðphy1>; 121 pinctrl-names = "default"; 122 pinctrl-0 = <&pinctrl_rgmii4_default>; 123}; 124 125&i2c0 { 126 multi-master; 127 bus-frequency = <1000000>; 128}; 129 130&i2c1 { 131 /* 132 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch 133 * Main Board). 134 */ 135 i2c-switch@70 { 136 compatible = "nxp,pca9548"; 137 #address-cells = <1>; 138 #size-cells = <0>; 139 reg = <0x70>; 140 i2c-mux-idle-disconnect; 141 142 imux16: i2c@0 { 143 #address-cells = <1>; 144 #size-cells = <0>; 145 reg = <0>; 146 }; 147 148 imux17: i2c@1 { 149 #address-cells = <1>; 150 #size-cells = <0>; 151 reg = <1>; 152 }; 153 154 imux18: i2c@2 { 155 #address-cells = <1>; 156 #size-cells = <0>; 157 reg = <2>; 158 }; 159 160 imux19: i2c@3 { 161 #address-cells = <1>; 162 #size-cells = <0>; 163 reg = <3>; 164 }; 165 166 imux20: i2c@4 { 167 #address-cells = <1>; 168 #size-cells = <0>; 169 reg = <4>; 170 }; 171 172 imux21: i2c@5 { 173 #address-cells = <1>; 174 #size-cells = <0>; 175 reg = <5>; 176 }; 177 178 imux22: i2c@6 { 179 #address-cells = <1>; 180 #size-cells = <0>; 181 reg = <6>; 182 }; 183 184 imux23: i2c@7 { 185 #address-cells = <1>; 186 #size-cells = <0>; 187 reg = <7>; 188 }; 189 }; 190}; 191 192&i2c2 { 193 /* 194 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System 195 * Controller Module). 196 */ 197 i2c-switch@70 { 198 compatible = "nxp,pca9548"; 199 #address-cells = <1>; 200 #size-cells = <0>; 201 reg = <0x70>; 202 i2c-mux-idle-disconnect; 203 204 imux24: i2c@0 { 205 #address-cells = <1>; 206 #size-cells = <0>; 207 reg = <0>; 208 }; 209 210 imux25: i2c@1 { 211 #address-cells = <1>; 212 #size-cells = <0>; 213 reg = <1>; 214 }; 215 216 imux26: i2c@2 { 217 #address-cells = <1>; 218 #size-cells = <0>; 219 reg = <2>; 220 }; 221 222 imux27: i2c@3 { 223 #address-cells = <1>; 224 #size-cells = <0>; 225 reg = <3>; 226 }; 227 228 imux28: i2c@4 { 229 #address-cells = <1>; 230 #size-cells = <0>; 231 reg = <4>; 232 }; 233 234 imux29: i2c@5 { 235 #address-cells = <1>; 236 #size-cells = <0>; 237 reg = <5>; 238 }; 239 240 imux30: i2c@6 { 241 #address-cells = <1>; 242 #size-cells = <0>; 243 reg = <6>; 244 }; 245 246 imux31: i2c@7 { 247 #address-cells = <1>; 248 #size-cells = <0>; 249 reg = <7>; 250 }; 251 }; 252}; 253 254&i2c3 { 255 /* 256 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch 257 * Main Board). 258 */ 259 i2c-switch@70 { 260 compatible = "nxp,pca9548"; 261 #address-cells = <1>; 262 #size-cells = <0>; 263 reg = <0x70>; 264 i2c-mux-idle-disconnect; 265 266 imux32: i2c@0 { 267 #address-cells = <1>; 268 #size-cells = <0>; 269 reg = <0>; 270 }; 271 272 imux33: i2c@1 { 273 #address-cells = <1>; 274 #size-cells = <0>; 275 reg = <1>; 276 }; 277 278 imux34: i2c@2 { 279 #address-cells = <1>; 280 #size-cells = <0>; 281 reg = <2>; 282 }; 283 284 imux35: i2c@3 { 285 #address-cells = <1>; 286 #size-cells = <0>; 287 reg = <3>; 288 }; 289 290 imux36: i2c@4 { 291 #address-cells = <1>; 292 #size-cells = <0>; 293 reg = <4>; 294 }; 295 296 imux37: i2c@5 { 297 #address-cells = <1>; 298 #size-cells = <0>; 299 reg = <5>; 300 }; 301 302 imux38: i2c@6 { 303 #address-cells = <1>; 304 #size-cells = <0>; 305 reg = <6>; 306 }; 307 308 imux39: i2c@7 { 309 #address-cells = <1>; 310 #size-cells = <0>; 311 reg = <7>; 312 }; 313 }; 314}; 315 316&i2c6 { 317 lp5012@14 { 318 compatible = "ti,lp5012"; 319 reg = <0x14>; 320 #address-cells = <1>; 321 #size-cells = <0>; 322 323 multi-led@0 { 324 #address-cells = <1>; 325 #size-cells = <0>; 326 reg = <0>; 327 color = <LED_COLOR_ID_MULTI>; 328 function = LED_FUNCTION_ACTIVITY; 329 label = "sys"; 330 331 led@0 { 332 reg = <0>; 333 color = <LED_COLOR_ID_RED>; 334 }; 335 336 led@1 { 337 reg = <1>; 338 color = <LED_COLOR_ID_BLUE>; 339 }; 340 341 led@2 { 342 reg = <2>; 343 color = <LED_COLOR_ID_GREEN>; 344 }; 345 }; 346 347 multi-led@1 { 348 #address-cells = <1>; 349 #size-cells = <0>; 350 reg = <1>; 351 color = <LED_COLOR_ID_MULTI>; 352 function = LED_FUNCTION_ACTIVITY; 353 label = "fan"; 354 355 led@0 { 356 reg = <0>; 357 color = <LED_COLOR_ID_RED>; 358 }; 359 360 led@1 { 361 reg = <1>; 362 color = <LED_COLOR_ID_BLUE>; 363 }; 364 365 led@2 { 366 reg = <2>; 367 color = <LED_COLOR_ID_GREEN>; 368 }; 369 }; 370 371 multi-led@2 { 372 #address-cells = <1>; 373 #size-cells = <0>; 374 reg = <2>; 375 color = <LED_COLOR_ID_MULTI>; 376 function = LED_FUNCTION_ACTIVITY; 377 label = "psu"; 378 379 led@0 { 380 reg = <0>; 381 color = <LED_COLOR_ID_RED>; 382 }; 383 384 led@1 { 385 reg = <1>; 386 color = <LED_COLOR_ID_BLUE>; 387 }; 388 389 led@2 { 390 reg = <2>; 391 color = <LED_COLOR_ID_GREEN>; 392 }; 393 }; 394 395 multi-led@3 { 396 #address-cells = <1>; 397 #size-cells = <0>; 398 reg = <3>; 399 color = <LED_COLOR_ID_MULTI>; 400 function = LED_FUNCTION_ACTIVITY; 401 label = "scm"; 402 403 led@0 { 404 reg = <0>; 405 color = <LED_COLOR_ID_RED>; 406 }; 407 408 led@1 { 409 reg = <1>; 410 color = <LED_COLOR_ID_BLUE>; 411 }; 412 413 led@2 { 414 reg = <2>; 415 color = <LED_COLOR_ID_GREEN>; 416 }; 417 }; 418 }; 419}; 420 421&i2c8 { 422 /* 423 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power 424 * Delivery Board). 425 */ 426 i2c-switch@70 { 427 compatible = "nxp,pca9548"; 428 #address-cells = <1>; 429 #size-cells = <0>; 430 reg = <0x70>; 431 i2c-mux-idle-disconnect; 432 433 imux40: i2c@0 { 434 #address-cells = <1>; 435 #size-cells = <0>; 436 reg = <0>; 437 }; 438 439 imux41: i2c@1 { 440 #address-cells = <1>; 441 #size-cells = <0>; 442 reg = <1>; 443 }; 444 445 imux42: i2c@2 { 446 #address-cells = <1>; 447 #size-cells = <0>; 448 reg = <2>; 449 }; 450 451 imux43: i2c@3 { 452 #address-cells = <1>; 453 #size-cells = <0>; 454 reg = <3>; 455 }; 456 457 imux44: i2c@4 { 458 #address-cells = <1>; 459 #size-cells = <0>; 460 reg = <4>; 461 }; 462 463 imux45: i2c@5 { 464 #address-cells = <1>; 465 #size-cells = <0>; 466 reg = <5>; 467 }; 468 469 imux46: i2c@6 { 470 #address-cells = <1>; 471 #size-cells = <0>; 472 reg = <6>; 473 }; 474 475 imux47: i2c@7 { 476 #address-cells = <1>; 477 #size-cells = <0>; 478 reg = <7>; 479 }; 480 481 }; 482}; 483 484&i2c15 { 485 /* 486 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan 487 * Controller Module). 488 */ 489 i2c-switch@76 { 490 compatible = "nxp,pca9548"; 491 #address-cells = <1>; 492 #size-cells = <0>; 493 reg = <0x76>; 494 i2c-mux-idle-disconnect; 495 496 imux48: i2c@0 { 497 #address-cells = <1>; 498 #size-cells = <0>; 499 reg = <0>; 500 }; 501 502 imux49: i2c@1 { 503 #address-cells = <1>; 504 #size-cells = <0>; 505 reg = <1>; 506 }; 507 508 imux50: i2c@2 { 509 #address-cells = <1>; 510 #size-cells = <0>; 511 reg = <2>; 512 }; 513 514 imux51: i2c@3 { 515 #address-cells = <1>; 516 #size-cells = <0>; 517 reg = <3>; 518 }; 519 520 imux52: i2c@4 { 521 #address-cells = <1>; 522 #size-cells = <0>; 523 reg = <4>; 524 }; 525 526 imux53: i2c@5 { 527 #address-cells = <1>; 528 #size-cells = <0>; 529 reg = <5>; 530 }; 531 532 imux54: i2c@6 { 533 #address-cells = <1>; 534 #size-cells = <0>; 535 reg = <6>; 536 }; 537 538 imux55: i2c@7 { 539 #address-cells = <1>; 540 #size-cells = <0>; 541 reg = <7>; 542 }; 543 }; 544};