cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

at91-sam9_l9260.dts (2441B)

      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
      4 *
      5 *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
      6 */
      7/dts-v1/;
      8#include "at91sam9260.dtsi"
      9
     10/ {
     11	model = "Olimex sam9-l9260";
     12	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
     13
     14	chosen {
     15		stdout-path = "serial0:115200n8";
     16	};
     17
     18	memory@20000000 {
     19		reg = <0x20000000 0x4000000>;
     20	};
     21
     22	clocks {
     23		slow_xtal {
     24			clock-frequency = <32768>;
     25		};
     26
     27		main_xtal {
     28			clock-frequency = <18432000>;
     29		};
     30	};
     31
     32	ahb {
     33		apb {
     34			tcb0: timer@fffa0000 {
     35				timer@0 {
     36					compatible = "atmel,tcb-timer";
     37					reg = <0>, <1>;
     38				};
     39
     40				timer@2 {
     41					compatible = "atmel,tcb-timer";
     42					reg = <2>;
     43				};
     44			};
     45
     46			mmc0: mmc@fffa8000 {
     47				pinctrl-0 = <
     48					&pinctrl_board_mmc0
     49					&pinctrl_mmc0_clk
     50					&pinctrl_mmc0_slot1_cmd_dat0
     51					&pinctrl_mmc0_slot1_dat1_3>;
     52				pinctrl-names = "default";
     53				status = "okay";
     54
     55				slot@1 {
     56					reg = <1>;
     57					bus-width = <4>;
     58					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
     59					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
     60				};
     61			};
     62
     63			macb0: ethernet@fffc4000 {
     64				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
     65				phy-mode = "mii";
     66				#address-cells = <1>;
     67				#size-cells = <0>;
     68				status = "okay";
     69
     70				ethernet-phy@1 {
     71					reg = <0x1>;
     72				};
     73			};
     74
     75			spi0: spi@fffc8000 {
     76				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
     77				status = "okay";
     78
     79				flash@0 {
     80					compatible = "atmel,at45", "atmel,dataflash";
     81					spi-max-frequency = <15000000>;
     82					reg = <0>;
     83				};
     84			};
     85
     86			dbgu: serial@fffff200 {
     87				status = "okay";
     88			};
     89
     90			pinctrl@fffff400 {
     91				mmc0 {
     92					pinctrl_board_mmc0: mmc0-board {
     93						atmel,pins =
     94							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
     95							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
     96					};
     97				};
     98			};
     99		};
    100
    101		nand0: nand@40000000 {
    102			nand-bus-width = <8>;
    103			nand-ecc-mode = "soft";
    104			nand-on-flash-bbt;
    105			status = "okay";
    106		};
    107
    108		usb0: ohci@500000 {
    109			status = "okay";
    110		};
    111
    112	};
    113
    114	i2c-gpio-0 {
    115		status = "okay";
    116	};
    117
    118	leds {
    119		compatible = "gpio-leds";
    120
    121		pwr_led {
    122			label = "sam9-l9260:yellow:pwr";
    123			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
    124			linux,default-trigger = "cpu0";
    125		};
    126
    127		status_led {
    128			label = "sam9-l9260:green:status";
    129			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
    130			linux,default-trigger = "timer";
    131		};
    132	};
    133};