cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

at91sam9x5ek.dtsi (3182B)

      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
      4 *
      5 *  Copyright (C) 2012 Atmel,
      6 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
      7 */
      8#include "at91sam9x5cm.dtsi"
      9
     10/ {
     11	model = "Atmel AT91SAM9X5-EK";
     12	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
     13
     14	chosen {
     15		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
     16		stdout-path = "serial0:115200n8";
     17	};
     18
     19	sound {
     20		compatible = "atmel,sam9x5-wm8731-audio";
     21
     22		atmel,model = "wm8731 @ AT91SAM9X5EK";
     23
     24		atmel,audio-routing =
     25			"Headphone Jack", "RHPOUT",
     26			"Headphone Jack", "LHPOUT",
     27			"LLINEIN", "Line In Jack",
     28			"RLINEIN", "Line In Jack";
     29
     30		atmel,ssc-controller = <&ssc0>;
     31		atmel,audio-codec = <&wm8731>;
     32	};
     33};
     34
     35&adc0 {
     36	atmel,adc-ts-wires = <4>;
     37	atmel,adc-ts-pressure-threshold = <10000>;
     38	status = "okay";
     39};
     40
     41&dbgu {
     42	status = "okay";
     43};
     44
     45&i2c0 {
     46	status = "okay";
     47
     48	wm8731: wm8731@1a {
     49		compatible = "wm8731";
     50		reg = <0x1a>;
     51	};
     52};
     53
     54&mmc0 {
     55	pinctrl-0 = <
     56		&pinctrl_board_mmc0
     57		&pinctrl_mmc0_slot0_clk_cmd_dat0
     58		&pinctrl_mmc0_slot0_dat1_3>;
     59	pinctrl-names = "default";
     60	status = "okay";
     61
     62	slot@0 {
     63		reg = <0>;
     64		bus-width = <4>;
     65		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
     66	};
     67};
     68
     69&mmc1 {
     70	pinctrl-0 = <
     71		&pinctrl_board_mmc1
     72		&pinctrl_mmc1_slot0_clk_cmd_dat0
     73		&pinctrl_mmc1_slot0_dat1_3>;
     74	pinctrl-names = "default";
     75	status = "okay";
     76
     77	slot@0 {
     78		reg = <0>;
     79		bus-width = <4>;
     80		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
     81	};
     82};
     83
     84&pinctrl {
     85	camera_sensor {
     86		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
     87			atmel,pins =
     88				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
     89		};
     90
     91		pinctrl_sensor_power: sensor_power-0 {
     92			atmel,pins =
     93				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
     94		};
     95
     96		pinctrl_sensor_reset: sensor_reset-0 {
     97			atmel,pins =
     98				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
     99		};
    100	};
    101
    102	mmc0 {
    103		pinctrl_board_mmc0: mmc0-board {
    104			atmel,pins =
    105				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
    106		};
    107	};
    108
    109	mmc1 {
    110		pinctrl_board_mmc1: mmc1-board {
    111			atmel,pins =
    112				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
    113		};
    114	};
    115
    116	usb2 {
    117		pinctrl_board_usb2: usb2-board {
    118			atmel,pins =
    119				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
    120		};
    121	};
    122};
    123
    124&spi0 {
    125	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
    126	status = "disabled"; /* conflicts with mmc1 */
    127
    128	flash@0 {
    129		compatible = "atmel,at25df321a";
    130		spi-max-frequency = <50000000>;
    131		reg = <0>;
    132	};
    133};
    134
    135&ssc0 {
    136	status = "okay";
    137};
    138
    139&usart0 {
    140	atmel,use-dma-rx;
    141	atmel,use-dma-tx;
    142	status = "okay";
    143};
    144
    145&usb0 {
    146	num-ports = <3>;
    147	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
    148			   &pioD 19 GPIO_ACTIVE_LOW
    149			   &pioD 20 GPIO_ACTIVE_LOW
    150			  >;
    151	status = "okay";
    152};
    153
    154&usb1 {
    155	status = "okay";
    156};
    157
    158&usb2 {
    159	pinctrl-names = "default";
    160	pinctrl-0 = <&pinctrl_board_usb2>;
    161	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
    162	status = "okay";
    163};
    164
    165&watchdog {
    166	status = "okay";
    167};