axm55xx.dtsi (4932B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * arch/arm/boot/dts/axm55xx.dtsi 4 * 5 * Copyright (C) 2013 LSI 6 */ 7 8#include <dt-bindings/interrupt-controller/arm-gic.h> 9#include <dt-bindings/clock/lsi,axm5516-clks.h> 10 11/ { 12 #address-cells = <2>; 13 #size-cells = <2>; 14 interrupt-parent = <&gic>; 15 16 aliases { 17 serial0 = &serial0; 18 serial1 = &serial1; 19 serial2 = &serial2; 20 serial3 = &serial3; 21 timer = &timer0; 22 }; 23 24 clocks { 25 compatible = "simple-bus"; 26 #address-cells = <2>; 27 #size-cells = <2>; 28 ranges; 29 30 clk_ref0: clk_ref0 { 31 compatible = "fixed-clock"; 32 #clock-cells = <0>; 33 clock-frequency = <125000000>; 34 }; 35 36 clk_ref1: clk_ref1 { 37 compatible = "fixed-clock"; 38 #clock-cells = <0>; 39 clock-frequency = <125000000>; 40 }; 41 42 clk_ref2: clk_ref2 { 43 compatible = "fixed-clock"; 44 #clock-cells = <0>; 45 clock-frequency = <125000000>; 46 }; 47 48 clks: clock-controller@2010020000 { 49 compatible = "lsi,axm5516-clks"; 50 #clock-cells = <1>; 51 reg = <0x20 0x10020000 0 0x20000>; 52 }; 53 }; 54 55 gic: interrupt-controller@2001001000 { 56 compatible = "arm,cortex-a15-gic"; 57 #interrupt-cells = <3>; 58 #address-cells = <0>; 59 interrupt-controller; 60 reg = <0x20 0x01001000 0 0x1000>, 61 <0x20 0x01002000 0 0x2000>, 62 <0x20 0x01004000 0 0x2000>, 63 <0x20 0x01006000 0 0x2000>; 64 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | 65 IRQ_TYPE_LEVEL_HIGH)>; 66 }; 67 68 timer { 69 compatible = "arm,armv7-timer"; 70 interrupts = 71 <GIC_PPI 13 72 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 73 <GIC_PPI 14 74 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 75 <GIC_PPI 11 76 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 77 <GIC_PPI 10 78 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 79 }; 80 81 82 pmu { 83 compatible = "arm,cortex-a15-pmu"; 84 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 85 }; 86 87 soc { 88 compatible = "simple-bus"; 89 device_type = "soc"; 90 #address-cells = <2>; 91 #size-cells = <2>; 92 interrupt-parent = <&gic>; 93 ranges; 94 95 syscon: syscon@2010030000 { 96 compatible = "lsi,axxia-syscon", "syscon"; 97 reg = <0x20 0x10030000 0 0x2000>; 98 }; 99 100 reset: reset@2010031000 { 101 compatible = "lsi,axm55xx-reset"; 102 syscon = <&syscon>; 103 }; 104 105 amba { 106 compatible = "simple-bus"; 107 #address-cells = <2>; 108 #size-cells = <2>; 109 ranges; 110 111 serial0: uart@2010080000 { 112 compatible = "arm,pl011", "arm,primecell"; 113 reg = <0x20 0x10080000 0 0x1000>; 114 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; 115 clocks = <&clks AXXIA_CLK_PER>; 116 clock-names = "apb_pclk"; 117 status = "disabled"; 118 }; 119 120 serial1: uart@2010081000 { 121 compatible = "arm,pl011", "arm,primecell"; 122 reg = <0x20 0x10081000 0 0x1000>; 123 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; 124 clocks = <&clks AXXIA_CLK_PER>; 125 clock-names = "apb_pclk"; 126 status = "disabled"; 127 }; 128 129 serial2: uart@2010082000 { 130 compatible = "arm,pl011", "arm,primecell"; 131 reg = <0x20 0x10082000 0 0x1000>; 132 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; 133 clocks = <&clks AXXIA_CLK_PER>; 134 clock-names = "apb_pclk"; 135 status = "disabled"; 136 }; 137 138 serial3: uart@2010083000 { 139 compatible = "arm,pl011", "arm,primecell"; 140 reg = <0x20 0x10083000 0 0x1000>; 141 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; 142 clocks = <&clks AXXIA_CLK_PER>; 143 clock-names = "apb_pclk"; 144 status = "disabled"; 145 }; 146 147 timer0: timer@2010091000 { 148 compatible = "arm,sp804", "arm,primecell"; 149 reg = <0x20 0x10091000 0 0x1000>; 150 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, 151 <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, 152 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, 153 <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, 154 <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, 155 <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, 156 <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, 157 <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, 158 <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; 159 clocks = <&clks AXXIA_CLK_PER>; 160 clock-names = "apb_pclk"; 161 status = "okay"; 162 }; 163 164 gpio0: gpio@2010092000 { 165 #gpio-cells = <2>; 166 compatible = "arm,pl061", "arm,primecell"; 167 gpio-controller; 168 reg = <0x20 0x10092000 0x00 0x1000>; 169 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, 170 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, 171 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 172 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, 173 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, 174 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, 175 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, 176 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 177 clocks = <&clks AXXIA_CLK_PER>; 178 clock-names = "apb_pclk"; 179 status = "disabled"; 180 }; 181 182 gpio1: gpio@2010093000 { 183 #gpio-cells = <2>; 184 compatible = "arm,pl061", "arm,primecell"; 185 gpio-controller; 186 reg = <0x20 0x10093000 0x00 0x1000>; 187 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; 188 clocks = <&clks AXXIA_CLK_PER>; 189 clock-names = "apb_pclk"; 190 status = "disabled"; 191 }; 192 }; 193 }; 194}; 195 196/* 197 Local Variables: 198 mode: C 199 End: 200*/