bcm2711-rpi.dtsi (1479B)
1// SPDX-License-Identifier: GPL-2.0 2#include "bcm2835-rpi.dtsi" 3 4#include <dt-bindings/reset/raspberrypi,firmware-reset.h> 5 6/ { 7 /* Will be filled by the bootloader */ 8 memory@0 { 9 device_type = "memory"; 10 reg = <0 0 0>; 11 }; 12 13 aliases { 14 emmc2bus = &emmc2bus; 15 ethernet0 = &genet; 16 pcie0 = &pcie0; 17 blconfig = &blconfig; 18 }; 19}; 20 21&firmware { 22 firmware_clocks: clocks { 23 compatible = "raspberrypi,firmware-clocks"; 24 #clock-cells = <1>; 25 }; 26 27 expgpio: gpio { 28 compatible = "raspberrypi,firmware-gpio"; 29 gpio-controller; 30 #gpio-cells = <2>; 31 status = "okay"; 32 }; 33 34 reset: reset { 35 compatible = "raspberrypi,firmware-reset"; 36 #reset-cells = <1>; 37 }; 38}; 39 40&hdmi0 { 41 clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; 42 clock-names = "hdmi", "bvb", "audio", "cec"; 43 wifi-2.4ghz-coexistence; 44}; 45 46&hdmi1 { 47 clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; 48 clock-names = "hdmi", "bvb", "audio", "cec"; 49 wifi-2.4ghz-coexistence; 50}; 51 52&hvs { 53 clocks = <&firmware_clocks 4>; 54}; 55 56&rmem { 57 /* 58 * RPi4's co-processor will copy the board's bootloader configuration 59 * into memory for the OS to consume. It'll also update this node with 60 * its placement information. 61 */ 62 blconfig: nvram@0 { 63 compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; 64 #address-cells = <1>; 65 #size-cells = <1>; 66 reg = <0x0 0x0 0x0>; 67 no-map; 68 status = "disabled"; 69 }; 70}; 71 72&vchiq { 73 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 74};