bcm7445.dtsi (7235B)
1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/interrupt-controller/arm-gic.h> 3 4/ { 5 #address-cells = <2>; 6 #size-cells = <2>; 7 model = "Broadcom STB (bcm7445)"; 8 compatible = "brcm,bcm7445", "brcm,brcmstb"; 9 interrupt-parent = <&gic>; 10 11 chosen { 12 bootargs = "console=ttyS0,115200 earlyprintk"; 13 }; 14 15 cpus { 16 #address-cells = <1>; 17 #size-cells = <0>; 18 19 cpu@0 { 20 compatible = "brcm,brahma-b15"; 21 device_type = "cpu"; 22 enable-method = "brcm,brahma-b15"; 23 reg = <0>; 24 }; 25 26 cpu@1 { 27 compatible = "brcm,brahma-b15"; 28 device_type = "cpu"; 29 enable-method = "brcm,brahma-b15"; 30 reg = <1>; 31 }; 32 33 cpu@2 { 34 compatible = "brcm,brahma-b15"; 35 device_type = "cpu"; 36 enable-method = "brcm,brahma-b15"; 37 reg = <2>; 38 }; 39 40 cpu@3 { 41 compatible = "brcm,brahma-b15"; 42 device_type = "cpu"; 43 enable-method = "brcm,brahma-b15"; 44 reg = <3>; 45 }; 46 }; 47 48 gic: interrupt-controller@ffd00000 { 49 compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; 50 reg = <0x00 0xffd01000 0x00 0x1000>, 51 <0x00 0xffd02000 0x00 0x2000>, 52 <0x00 0xffd04000 0x00 0x2000>, 53 <0x00 0xffd06000 0x00 0x2000>; 54 interrupt-controller; 55 #interrupt-cells = <3>; 56 }; 57 58 timer { 59 compatible = "arm,armv7-timer"; 60 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, 61 <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, 62 <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, 63 <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; 64 }; 65 66 rdb@f0000000 { 67 #address-cells = <1>; 68 #size-cells = <1>; 69 compatible = "simple-bus"; 70 ranges = <0 0x00 0xf0000000 0x1000000>; 71 72 serial@40ab00 { 73 compatible = "ns16550a"; 74 reg = <0x40ab00 0x20>; 75 reg-shift = <2>; 76 reg-io-width = <4>; 77 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 78 clock-frequency = <81000000>; 79 }; 80 81 sun_top_ctrl: syscon@404000 { 82 compatible = "brcm,bcm7445-sun-top-ctrl", 83 "syscon"; 84 reg = <0x404000 0x51c>; 85 }; 86 87 hif_cpubiuctrl: syscon@3e2400 { 88 compatible = "brcm,bcm7445-hif-cpubiuctrl", 89 "syscon"; 90 reg = <0x3e2400 0x5b4>; 91 }; 92 93 hif_continuation: syscon@452000 { 94 compatible = "brcm,bcm7445-hif-continuation", 95 "syscon"; 96 reg = <0x452000 0x100>; 97 }; 98 99 irq0_intc: interrupt-controller@40a780 { 100 compatible = "brcm,bcm7120-l2-intc"; 101 interrupt-parent = <&gic>; 102 #interrupt-cells = <1>; 103 reg = <0x40a780 0x8>; 104 interrupt-controller; 105 interrupts = <GIC_SPI 0x45 0x0>, 106 <GIC_SPI 0x43 0x0>; 107 brcm,int-map-mask = <0x25c>, <0x7000000>; 108 brcm,int-fwd-mask = <0x70000>; 109 }; 110 111 irq0_aon_intc: interrupt-controller@417280 { 112 compatible = "brcm,bcm7120-l2-intc"; 113 reg = <0x417280 0x8>; 114 interrupt-parent = <&gic>; 115 #interrupt-cells = <1>; 116 interrupt-controller; 117 interrupts = <GIC_SPI 0x46 0x0>, 118 <GIC_SPI 0x44 0x0>, 119 <GIC_SPI 0x49 0x0>; 120 brcm,int-map-mask = <0x1e3 0x18000000 0x100000>; 121 brcm,int-fwd-mask = <0x0>; 122 brcm,irq-can-wake; 123 }; 124 125 hif_intr2_intc: interrupt-controller@3e1000 { 126 compatible = "brcm,l2-intc"; 127 reg = <0x3e1000 0x30>; 128 interrupt-controller; 129 #interrupt-cells = <1>; 130 interrupts = <GIC_SPI 0x20 0x0>; 131 interrupt-parent = <&gic>; 132 interrupt-names = "hif"; 133 }; 134 135 aon_pm_l2_intc: interrupt-controller@410640 { 136 compatible = "brcm,l2-intc"; 137 reg = <0x410640 0x30>; 138 interrupt-controller; 139 #interrupt-cells = <1>; 140 interrupts = <GIC_SPI 0x40 0x0>; 141 interrupt-parent = <&gic>; 142 brcm,irq-can-wake; 143 }; 144 145 aon-ctrl@410000 { 146 compatible = "brcm,brcmstb-aon-ctrl"; 147 reg = <0x410000 0x200>, <0x410200 0x400>; 148 reg-names = "aon-ctrl", "aon-sram"; 149 }; 150 151 nand_controller: nand-controller@3e2800 { 152 status = "disabled"; 153 #address-cells = <1>; 154 #size-cells = <0>; 155 compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; 156 reg-names = "nand", "flash-dma"; 157 reg = <0x3e2800 0x600>, <0x3e3000 0x2c>; 158 interrupt-parent = <&hif_intr2_intc>; 159 interrupts = <24>, <4>; 160 interrupt-names = "nand_ctlrdy", "flash_dma_done"; 161 }; 162 163 sata@45a000 { 164 compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; 165 reg-names = "ahci", "top-ctrl"; 166 reg = <0x45a000 0xa9c>, <0x458040 0x24>; 167 interrupts = <GIC_SPI 30 0>; 168 #address-cells = <1>; 169 #size-cells = <0>; 170 171 sata0: sata-port@0 { 172 reg = <0>; 173 phys = <&sata_phy0>; 174 }; 175 176 sata1: sata-port@1 { 177 reg = <1>; 178 phys = <&sata_phy1>; 179 }; 180 }; 181 182 sata_phy: sata-phy@458100 { 183 compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; 184 reg = <0x458100 0x1f00>; 185 reg-names = "phy"; 186 #address-cells = <0x1>; 187 #size-cells = <0x0>; 188 189 sata_phy0: sata-phy@0 { 190 reg = <0>; 191 #phy-cells = <0>; 192 }; 193 194 sata_phy1: sata-phy@1 { 195 reg = <1>; 196 #phy-cells = <0>; 197 }; 198 }; 199 200 upg_gio: gpio@40a700 { 201 compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; 202 reg = <0x40a700 0x80>; 203 #gpio-cells = <2>; 204 #interrupt-cells = <2>; 205 gpio-controller; 206 interrupt-controller; 207 interrupt-parent = <&irq0_intc>; 208 interrupts = <6>; 209 brcm,gpio-bank-widths = <32 32 32 24>; 210 }; 211 212 upg_gio_aon: gpio@4172c0 { 213 compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; 214 reg = <0x4172c0 0x40>; 215 #gpio-cells = <2>; 216 #interrupt-cells = <2>; 217 gpio-controller; 218 interrupt-controller; 219 interrupts-extended = <&irq0_aon_intc 0x6>, 220 <&aon_pm_l2_intc 0x5>; 221 wakeup-source; 222 brcm,gpio-bank-widths = <18 4>; 223 }; 224 225 }; 226 227 memory_controllers@f1100000 { 228 compatible = "simple-bus"; 229 ranges = <0x0 0x0 0xf1100000 0x200000>; 230 #address-cells = <1>; 231 #size-cells = <1>; 232 233 memc@0 { 234 compatible = "brcm,brcmstb-memc", "simple-bus"; 235 #address-cells = <1>; 236 #size-cells = <1>; 237 ranges = <0x0 0x0 0x80000>; 238 239 memc-ddr@2000 { 240 compatible = "brcm,brcmstb-memc-ddr"; 241 reg = <0x2000 0x800>; 242 }; 243 244 ddr-phy@6000 { 245 compatible = "brcm,brcmstb-ddr-phy-v240.1"; 246 reg = <0x6000 0x21c>; 247 }; 248 249 shimphy@8000 { 250 compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; 251 reg = <0x8000 0xe4>; 252 }; 253 }; 254 255 memc@80000 { 256 compatible = "brcm,brcmstb-memc", "simple-bus"; 257 #address-cells = <1>; 258 #size-cells = <1>; 259 ranges = <0x0 0x80000 0x80000>; 260 261 memc-ddr@2000 { 262 compatible = "brcm,brcmstb-memc-ddr"; 263 reg = <0x2000 0x800>; 264 }; 265 266 ddr-phy@6000 { 267 compatible = "brcm,brcmstb-ddr-phy-v240.1"; 268 reg = <0x6000 0x21c>; 269 }; 270 271 shimphy@8000 { 272 compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; 273 reg = <0x8000 0xe4>; 274 }; 275 }; 276 277 memc@100000 { 278 compatible = "brcm,brcmstb-memc", "simple-bus"; 279 #address-cells = <1>; 280 #size-cells = <1>; 281 ranges = <0x0 0x100000 0x80000>; 282 283 memc-ddr@2000 { 284 compatible = "brcm,brcmstb-memc-ddr"; 285 reg = <0x2000 0x800>; 286 }; 287 288 ddr-phy@6000 { 289 compatible = "brcm,brcmstb-ddr-phy-v240.1"; 290 reg = <0x6000 0x21c>; 291 }; 292 293 shimphy@8000 { 294 compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; 295 reg = <0x8000 0xe4>; 296 }; 297 }; 298 }; 299 300 sram@ffe00000 { 301 compatible = "brcm,boot-sram", "mmio-sram"; 302 reg = <0x0 0xffe00000 0x0 0x10000>; 303 }; 304 305 smpboot { 306 compatible = "brcm,brcmstb-smpboot"; 307 syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; 308 syscon-cont = <&hif_continuation>; 309 }; 310 311 reboot { 312 compatible = "brcm,brcmstb-reboot"; 313 syscon = <&sun_top_ctrl 0x304 0x308>; 314 }; 315};