cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

exynos3250-artik5-eval.dts (1722B)


      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
      4 *
      5 * Copyright (c) 2016 Samsung Electronics Co., Ltd.
      6 *		http://www.samsung.com
      7 *
      8 * Device tree source file for Samsung's ARTIK5 evaluation board
      9 * which is based on Samsung Exynos3250 SoC.
     10 */
     11
     12/dts-v1/;
     13#include "exynos3250-artik5.dtsi"
     14
     15/ {
     16	model = "Samsung ARTIK5 evaluation board";
     17	compatible = "samsung,artik5-eval", "samsung,artik5",
     18			"samsung,exynos3250", "samsung,exynos3";
     19};
     20
     21&mshc_2 {
     22	cap-sd-highspeed;
     23	disable-wp;
     24	vqmmc-supply = <&ldo3_reg>;
     25	card-detect-delay = <200>;
     26	clock-frequency = <100000000>;
     27	max-frequency = <100000000>;
     28	samsung,dw-mshc-ciu-div = <1>;
     29	samsung,dw-mshc-sdr-timing = <0 1>;
     30	samsung,dw-mshc-ddr-timing = <1 2>;
     31	pinctrl-names = "default";
     32	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
     33	bus-width = <4>;
     34	status = "okay";
     35};
     36
     37&serial_2 {
     38	status = "okay";
     39};
     40
     41&spi_0 {
     42	status = "okay";
     43	cs-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>, <0>;
     44
     45	assigned-clocks = <&cmu CLK_MOUT_SPI0>, <&cmu CLK_DIV_SPI0>,
     46			  <&cmu CLK_DIV_SPI0_PRE>, <&cmu CLK_SCLK_SPI0>;
     47	assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>, /* for: CLK_MOUT_SPI0 */
     48				 <&cmu CLK_MOUT_SPI0>,    /* for: CLK_DIV_SPI0 */
     49				 <&cmu CLK_DIV_SPI0>,     /* for: CLK_DIV_SPI0_PRE */
     50				 <&cmu CLK_DIV_SPI0_PRE>; /* for: CLK_SCLK_SPI0 */
     51
     52	ethernet@0 {
     53		compatible = "asix,ax88796c";
     54		reg = <0x0>;
     55		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a boot-loader */
     56		interrupt-parent = <&gpx2>;
     57		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
     58		spi-max-frequency = <40000000>;
     59		reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
     60
     61		controller-data {
     62			samsung,spi-feedback-delay = <2>;
     63		};
     64	};
     65};