cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

exynos5410-smdk5410.dts (3169B)

      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Samsung SMDK5410 board device tree source
      4 *
      5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
      6 *		http://www.samsung.com
      7 */
      8
      9/dts-v1/;
     10#include "exynos5410.dtsi"
     11#include <dt-bindings/interrupt-controller/irq.h>
     12/ {
     13	model = "Samsung SMDK5410 board based on Exynos5410";
     14	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
     15
     16	memory@40000000 {
     17		device_type = "memory";
     18		reg = <0x40000000 0x80000000>;
     19	};
     20
     21	chosen {
     22		stdout-path = "serial2:115200n8";
     23	};
     24
     25	fin_pll: xxti {
     26		compatible = "fixed-clock";
     27		clock-frequency = <24000000>;
     28		clock-output-names = "fin_pll";
     29		#clock-cells = <0>;
     30	};
     31
     32	pmic_ap_clk: pmic-ap-clk {
     33		/* Workaround for missing PMIC and its clock */
     34		compatible = "fixed-clock";
     35		#clock-cells = <0>;
     36		clock-frequency = <32768>;
     37	};
     38
     39	firmware@2037000 {
     40		compatible = "samsung,secure-firmware";
     41		reg = <0x02037000 0x1000>;
     42	};
     43
     44	vdd10_usb3: voltage-regulator-0 {
     45		compatible = "regulator-fixed";
     46		regulator-name = "VDD10_USB3";
     47		regulator-min-microvolt = <1000000>;
     48		regulator-max-microvolt = <1000000>;
     49	};
     50
     51	vdd33_usb3: voltage-regulator-0 {
     52		compatible = "regulator-fixed";
     53		regulator-name = "VDD33_USB3";
     54		regulator-min-microvolt = <3300000>;
     55		regulator-max-microvolt = <3300000>;
     56	};
     57};
     58
     59&mmc_0 {
     60	status = "okay";
     61	cap-mmc-highspeed;
     62	broken-cd;
     63	card-detect-delay = <200>;
     64	samsung,dw-mshc-ciu-div = <3>;
     65	samsung,dw-mshc-sdr-timing = <2 3>;
     66	samsung,dw-mshc-ddr-timing = <1 2>;
     67	bus-width = <8>;
     68};
     69
     70&mmc_2 {
     71	status = "okay";
     72	cap-sd-highspeed;
     73	card-detect-delay = <200>;
     74	samsung,dw-mshc-ciu-div = <3>;
     75	samsung,dw-mshc-sdr-timing = <2 3>;
     76	samsung,dw-mshc-ddr-timing = <1 2>;
     77	bus-width = <4>;
     78	disable-wp;
     79};
     80
     81&pinctrl_0 {
     82	srom_ctl: srom-ctl-pins {
     83		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
     84			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
     85		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
     86		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
     87	};
     88
     89	srom_ebi: srom-ebi-pins {
     90		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
     91			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
     92			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
     93			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
     94			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
     95			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
     96		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
     97		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
     98		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
     99	};
    100};
    101
    102&rtc {
    103	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
    104	clock-names = "rtc", "rtc_src";
    105};
    106
    107&sromc {
    108	pinctrl-names = "default";
    109	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
    110
    111	ethernet@3,0 {
    112		compatible = "smsc,lan9115";
    113		reg = <3 0 0x10000>;
    114		phy-mode = "mii";
    115		interrupt-parent = <&gpx0>;
    116		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
    117		reg-io-width = <2>;
    118		smsc,irq-push-pull;
    119		smsc,force-internal-phy;
    120
    121		samsung,srom-page-mode;
    122		samsung,srom-timing = <9 12 1 9 1 1>;
    123	};
    124};
    125
    126&serial_0 {
    127	status = "okay";
    128};
    129
    130&serial_1 {
    131	status = "okay";
    132};
    133
    134&serial_2 {
    135	status = "okay";
    136};
    137
    138&usbdrd3_0 {
    139	vdd10-supply = <&vdd10_usb3>;
    140	vdd33-supply = <&vdd33_usb3>;
    141};
    142
    143&usbdrd3_1 {
    144	vdd10-supply = <&vdd10_usb3>;
    145	vdd33-supply = <&vdd33_usb3>;
    146};