cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

imx28-eukrea-mbmx283lc.dts (1241B)

      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
      4 * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
      5 */
      6
      7/*
      8 * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
      9 */
     10
     11/dts-v1/;
     12#include "imx28-eukrea-mbmx28lc.dtsi"
     13
     14/ {
     15	model = "Eukrea Electromatique MBMX283LC";
     16	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
     17
     18	memory@40000000 {
     19		device_type = "memory";
     20		reg = <0x40000000 0x04000000>;
     21	};
     22};
     23
     24&gpmi {
     25	pinctrl-names = "default";
     26	pinctrl-0 = <&gpmi_pins_a>;
     27	status = "okay";
     28};
     29
     30&i2c0 {
     31	pinctrl-names = "default";
     32	pinctrl-0 = <&i2c0_pins_a>;
     33	status = "okay";
     34
     35	pcf8563: rtc@51 {
     36		compatible = "nxp,pcf8563";
     37		reg = <0x51>;
     38	};
     39};
     40
     41
     42&mac0 {
     43	phy-mode = "rmii";
     44	pinctrl-names = "default";
     45	pinctrl-0 = <&mac0_pins_a>;
     46	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
     47	status = "okay";
     48};
     49
     50&pinctrl{
     51	pinctrl-names = "default";
     52	pinctrl-0 = <&hog_pins_cpuimx283>;
     53
     54	hog_pins_cpuimx283: hog-cpuimx283@0 {
     55		reg = <0>;
     56		fsl,pinmux-ids = <
     57			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
     58			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
     59		>;
     60		fsl,drive-strength = <MXS_DRIVE_4mA>;
     61		fsl,voltage = <MXS_VOLTAGE_HIGH>;
     62		fsl,pull-up = <MXS_PULL_ENABLE>;
     63	};
     64};