imx35-eukrea-cpuimx35.dtsi (2051B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> 4 */ 5 6#include "imx35.dtsi" 7 8/ { 9 model = "Eukrea CPUIMX35"; 10 compatible = "eukrea,cpuimx35", "fsl,imx35"; 11 12 memory@80000000 { 13 device_type = "memory"; 14 reg = <0x80000000 0x8000000>; /* 128M */ 15 }; 16}; 17 18&fec { 19 pinctrl-names = "default"; 20 pinctrl-0 = <&pinctrl_fec>; 21 status = "okay"; 22}; 23 24&i2c1 { 25 pinctrl-names = "default"; 26 pinctrl-0 = <&pinctrl_i2c1>; 27 status = "okay"; 28 29 pcf8563@51 { 30 compatible = "nxp,pcf8563"; 31 reg = <0x51>; 32 }; 33 34 tsc2007: tsc2007@48 { 35 compatible = "ti,tsc2007"; 36 gpios = <&gpio3 2 0>; 37 interrupt-parent = <&gpio3>; 38 interrupts = <0x2 0x8>; 39 pinctrl-names = "default"; 40 pinctrl-0 = <&pinctrl_tsc2007_1>; 41 reg = <0x48>; 42 ti,x-plate-ohms = <180>; 43 }; 44}; 45 46&iomuxc { 47 imx35-eukrea { 48 pinctrl_fec: fecgrp { 49 fsl,pins = < 50 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 51 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 52 MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 53 MX35_PAD_FEC_COL__FEC_COL 0x80000000 54 MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 55 MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 56 MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 57 MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 58 MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 59 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 60 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 61 MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 62 MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 63 MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 64 MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 65 MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 66 MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 67 MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000 68 >; 69 }; 70 71 pinctrl_i2c1: i2c1grp { 72 fsl,pins = < 73 MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 74 MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 75 >; 76 }; 77 78 pinctrl_tsc2007_1: tsc2007grp-1 { 79 fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>; 80 }; 81 }; 82}; 83 84&nfc { 85 nand-bus-width = <8>; 86 nand-ecc-mode = "hw"; 87 nand-on-flash-bbt; 88 status = "okay"; 89};