imx51-babbage.dts (16262B)
1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright 2011 Freescale Semiconductor, Inc. 4// Copyright 2011 Linaro Ltd. 5 6/dts-v1/; 7#include "imx51.dtsi" 8 9/ { 10 model = "Freescale i.MX51 Babbage Board"; 11 compatible = "fsl,imx51-babbage", "fsl,imx51"; 12 13 chosen { 14 stdout-path = &uart1; 15 }; 16 17 memory@90000000 { 18 device_type = "memory"; 19 reg = <0x90000000 0x20000000>; 20 }; 21 22 ckih1 { 23 clock-frequency = <22579200>; 24 }; 25 26 clk_osc: clk-osc { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 clock-frequency = <26000000>; 30 }; 31 32 clk_osc_gate: clk-osc-gate { 33 compatible = "gpio-gate-clock"; 34 pinctrl-names = "default"; 35 pinctrl-0 = <&pinctrl_clk26mhz_osc>; 36 clocks = <&clk_osc>; 37 #clock-cells = <0>; 38 enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; 39 }; 40 41 clk_audio: clk-audio { 42 compatible = "gpio-gate-clock"; 43 pinctrl-names = "default"; 44 pinctrl-0 = <&pinctrl_clk26mhz_audio>; 45 clocks = <&clk_osc_gate>; 46 #clock-cells = <0>; 47 enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; 48 }; 49 50 clk_usb: clk-usb { 51 compatible = "gpio-gate-clock"; 52 pinctrl-names = "default"; 53 pinctrl-0 = <&pinctrl_clk26mhz_usb>; 54 clocks = <&clk_osc_gate>; 55 #clock-cells = <0>; 56 enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 57 }; 58 59 display1: disp1 { 60 compatible = "fsl,imx-parallel-display"; 61 #address-cells = <1>; 62 #size-cells = <0>; 63 interface-pix-fmt = "rgb24"; 64 pinctrl-names = "default"; 65 pinctrl-0 = <&pinctrl_ipu_disp1>; 66 67 port@0 { 68 reg = <0>; 69 70 display0_in: endpoint { 71 remote-endpoint = <&ipu_di0_disp1>; 72 }; 73 }; 74 75 port@1 { 76 reg = <1>; 77 78 parallel_display_out: endpoint { 79 remote-endpoint = <&tfp410_in>; 80 }; 81 }; 82 }; 83 84 display2: disp2 { 85 compatible = "fsl,imx-parallel-display"; 86 interface-pix-fmt = "rgb565"; 87 pinctrl-names = "default"; 88 pinctrl-0 = <&pinctrl_ipu_disp2>; 89 status = "disabled"; 90 display-timings { 91 native-mode = <&timing1>; 92 timing1: claawvga { 93 clock-frequency = <27000000>; 94 hactive = <800>; 95 vactive = <480>; 96 hback-porch = <40>; 97 hfront-porch = <60>; 98 vback-porch = <10>; 99 vfront-porch = <10>; 100 hsync-len = <20>; 101 vsync-len = <10>; 102 hsync-active = <0>; 103 vsync-active = <0>; 104 de-active = <1>; 105 pixelclk-active = <0>; 106 }; 107 }; 108 109 port { 110 display1_in: endpoint { 111 remote-endpoint = <&ipu_di1_disp2>; 112 }; 113 }; 114 }; 115 116 dvi-connector { 117 compatible = "dvi-connector"; 118 digital; 119 120 port { 121 dvi_connector_in: endpoint { 122 remote-endpoint = <&tfp410_out>; 123 }; 124 }; 125 }; 126 127 dvi-encoder { 128 compatible = "ti,tfp410"; 129 130 ports { 131 #address-cells = <1>; 132 #size-cells = <0>; 133 134 port@0 { 135 reg = <0>; 136 137 tfp410_in: endpoint { 138 remote-endpoint = <¶llel_display_out>; 139 }; 140 }; 141 142 port@1 { 143 reg = <1>; 144 145 tfp410_out: endpoint { 146 remote-endpoint = <&dvi_connector_in>; 147 }; 148 }; 149 }; 150 }; 151 152 gpio-keys { 153 compatible = "gpio-keys"; 154 pinctrl-names = "default"; 155 pinctrl-0 = <&pinctrl_gpio_keys>; 156 157 power { 158 label = "Power Button"; 159 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; 160 linux,code = <KEY_POWER>; 161 wakeup-source; 162 }; 163 }; 164 165 leds { 166 compatible = "gpio-leds"; 167 pinctrl-names = "default"; 168 pinctrl-0 = <&pinctrl_gpio_leds>; 169 170 led-diagnostic { 171 label = "diagnostic"; 172 gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; 173 }; 174 }; 175 176 regulators { 177 compatible = "simple-bus"; 178 #address-cells = <1>; 179 #size-cells = <0>; 180 181 reg_hub_reset: regulator@0 { 182 compatible = "regulator-fixed"; 183 pinctrl-names = "default"; 184 pinctrl-0 = <&pinctrl_usbotgreg>; 185 reg = <0>; 186 regulator-name = "hub_reset"; 187 regulator-min-microvolt = <5000000>; 188 regulator-max-microvolt = <5000000>; 189 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; 190 enable-active-high; 191 }; 192 }; 193 194 sound { 195 compatible = "fsl,imx51-babbage-sgtl5000", 196 "fsl,imx-audio-sgtl5000"; 197 model = "imx51-babbage-sgtl5000"; 198 ssi-controller = <&ssi2>; 199 audio-codec = <&sgtl5000>; 200 audio-routing = 201 "MIC_IN", "Mic Jack", 202 "Mic Jack", "Mic Bias", 203 "Headphone Jack", "HP_OUT"; 204 mux-int-port = <2>; 205 mux-ext-port = <3>; 206 }; 207 208 usbphy1: usbphy1 { 209 compatible = "usb-nop-xceiv"; 210 pinctrl-names = "default"; 211 pinctrl-0 = <&pinctrl_usbh1reg>; 212 clocks = <&clk_usb>; 213 clock-names = "main_clk"; 214 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; 215 vcc-supply = <&vusb_reg>; 216 #phy-cells = <0>; 217 }; 218}; 219 220&audmux { 221 pinctrl-names = "default"; 222 pinctrl-0 = <&pinctrl_audmux>; 223 status = "okay"; 224}; 225 226&ecspi1 { 227 pinctrl-names = "default"; 228 pinctrl-0 = <&pinctrl_ecspi1>; 229 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, 230 <&gpio4 25 GPIO_ACTIVE_LOW>; 231 status = "okay"; 232 233 pmic: mc13892@0 { 234 compatible = "fsl,mc13892"; 235 pinctrl-names = "default"; 236 pinctrl-0 = <&pinctrl_pmic>; 237 spi-max-frequency = <6000000>; 238 spi-cs-high; 239 reg = <0>; 240 interrupt-parent = <&gpio1>; 241 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; 242 fsl,mc13xxx-uses-adc; 243 fsl,mc13xxx-uses-rtc; 244 245 regulators { 246 sw1_reg: sw1 { 247 regulator-min-microvolt = <600000>; 248 regulator-max-microvolt = <1375000>; 249 regulator-boot-on; 250 regulator-always-on; 251 }; 252 253 sw2_reg: sw2 { 254 regulator-min-microvolt = <900000>; 255 regulator-max-microvolt = <1850000>; 256 regulator-boot-on; 257 regulator-always-on; 258 }; 259 260 sw3_reg: sw3 { 261 regulator-min-microvolt = <1100000>; 262 regulator-max-microvolt = <1850000>; 263 regulator-boot-on; 264 regulator-always-on; 265 }; 266 267 sw4_reg: sw4 { 268 regulator-min-microvolt = <1100000>; 269 regulator-max-microvolt = <1850000>; 270 regulator-boot-on; 271 regulator-always-on; 272 }; 273 274 vpll_reg: vpll { 275 regulator-min-microvolt = <1050000>; 276 regulator-max-microvolt = <1800000>; 277 regulator-boot-on; 278 regulator-always-on; 279 }; 280 281 vdig_reg: vdig { 282 regulator-min-microvolt = <1650000>; 283 regulator-max-microvolt = <1650000>; 284 regulator-boot-on; 285 }; 286 287 vsd_reg: vsd { 288 regulator-min-microvolt = <1800000>; 289 regulator-max-microvolt = <3150000>; 290 }; 291 292 vusb_reg: vusb { 293 regulator-boot-on; 294 }; 295 296 vusb2_reg: vusb2 { 297 regulator-min-microvolt = <2400000>; 298 regulator-max-microvolt = <2775000>; 299 regulator-boot-on; 300 regulator-always-on; 301 }; 302 303 vvideo_reg: vvideo { 304 regulator-min-microvolt = <2775000>; 305 regulator-max-microvolt = <2775000>; 306 }; 307 308 vaudio_reg: vaudio { 309 regulator-min-microvolt = <2300000>; 310 regulator-max-microvolt = <3000000>; 311 }; 312 313 vcam_reg: vcam { 314 regulator-min-microvolt = <2500000>; 315 regulator-max-microvolt = <3000000>; 316 }; 317 318 vgen1_reg: vgen1 { 319 regulator-min-microvolt = <1200000>; 320 regulator-max-microvolt = <1200000>; 321 }; 322 323 vgen2_reg: vgen2 { 324 regulator-min-microvolt = <1200000>; 325 regulator-max-microvolt = <3150000>; 326 regulator-always-on; 327 }; 328 329 vgen3_reg: vgen3 { 330 regulator-min-microvolt = <1800000>; 331 regulator-max-microvolt = <2900000>; 332 regulator-always-on; 333 }; 334 }; 335 }; 336 337 flash: at45db321d@1 { 338 #address-cells = <1>; 339 #size-cells = <1>; 340 compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; 341 spi-max-frequency = <25000000>; 342 reg = <1>; 343 344 partition@0 { 345 label = "U-Boot"; 346 reg = <0x0 0x40000>; 347 read-only; 348 }; 349 350 partition@40000 { 351 label = "Kernel"; 352 reg = <0x40000 0x3c0000>; 353 }; 354 }; 355}; 356 357&esdhc1 { 358 pinctrl-names = "default"; 359 pinctrl-0 = <&pinctrl_esdhc1>; 360 cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; 361 wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; 362 status = "okay"; 363}; 364 365&esdhc2 { 366 pinctrl-names = "default"; 367 pinctrl-0 = <&pinctrl_esdhc2>; 368 cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; 369 wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; 370 status = "okay"; 371}; 372 373&fec { 374 pinctrl-names = "default"; 375 pinctrl-0 = <&pinctrl_fec>; 376 phy-mode = "mii"; 377 phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; 378 phy-reset-duration = <1>; 379 status = "okay"; 380}; 381 382&i2c1 { 383 pinctrl-names = "default"; 384 pinctrl-0 = <&pinctrl_i2c1>; 385 status = "okay"; 386}; 387 388&i2c2 { 389 pinctrl-names = "default"; 390 pinctrl-0 = <&pinctrl_i2c2>; 391 status = "okay"; 392 393 sgtl5000: codec@a { 394 compatible = "fsl,sgtl5000"; 395 reg = <0x0a>; 396 #sound-dai-cells = <0>; 397 clocks = <&clk_audio>; 398 VDDA-supply = <&vdig_reg>; 399 VDDIO-supply = <&vvideo_reg>; 400 }; 401}; 402 403&ipu_di0_disp1 { 404 remote-endpoint = <&display0_in>; 405}; 406 407&ipu_di1_disp2 { 408 remote-endpoint = <&display1_in>; 409}; 410 411&kpp { 412 pinctrl-names = "default"; 413 pinctrl-0 = <&pinctrl_kpp>; 414 linux,keymap = < 415 MATRIX_KEY(0, 0, KEY_UP) 416 MATRIX_KEY(0, 1, KEY_DOWN) 417 MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) 418 MATRIX_KEY(0, 3, KEY_HOME) 419 MATRIX_KEY(1, 0, KEY_RIGHT) 420 MATRIX_KEY(1, 1, KEY_LEFT) 421 MATRIX_KEY(1, 2, KEY_ENTER) 422 MATRIX_KEY(1, 3, KEY_VOLUMEUP) 423 MATRIX_KEY(2, 0, KEY_F6) 424 MATRIX_KEY(2, 1, KEY_F8) 425 MATRIX_KEY(2, 2, KEY_F9) 426 MATRIX_KEY(2, 3, KEY_F10) 427 MATRIX_KEY(3, 0, KEY_F1) 428 MATRIX_KEY(3, 1, KEY_F2) 429 MATRIX_KEY(3, 2, KEY_F3) 430 MATRIX_KEY(3, 3, KEY_POWER) 431 >; 432 status = "okay"; 433}; 434 435&pmu { 436 secure-reg-access; 437}; 438 439&ssi2 { 440 status = "okay"; 441}; 442 443&uart1 { 444 pinctrl-names = "default"; 445 pinctrl-0 = <&pinctrl_uart1>; 446 uart-has-rtscts; 447 status = "okay"; 448}; 449 450&uart2 { 451 pinctrl-names = "default"; 452 pinctrl-0 = <&pinctrl_uart2>; 453 status = "okay"; 454}; 455 456&uart3 { 457 pinctrl-names = "default"; 458 pinctrl-0 = <&pinctrl_uart3>; 459 uart-has-rtscts; 460 status = "okay"; 461}; 462 463&usbh1 { 464 pinctrl-names = "default"; 465 pinctrl-0 = <&pinctrl_usbh1>; 466 vbus-supply = <®_hub_reset>; 467 fsl,usbphy = <&usbphy1>; 468 phy_type = "ulpi"; 469 status = "okay"; 470}; 471 472&usbphy0 { 473 vcc-supply = <&vusb_reg>; 474}; 475 476&usbotg { 477 dr_mode = "otg"; 478 disable-over-current; 479 phy_type = "utmi_wide"; 480 status = "okay"; 481}; 482 483&iomuxc { 484 imx51-babbage { 485 pinctrl_audmux: audmuxgrp { 486 fsl,pins = < 487 MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 488 MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 489 MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 490 MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 491 >; 492 }; 493 494 pinctrl_clk26mhz_audio: clk26mhzaudiocgrp { 495 fsl,pins = < 496 MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 497 >; 498 }; 499 500 pinctrl_clk26mhz_osc: clk26mhzoscgrp { 501 fsl,pins = < 502 MX51_PAD_DI1_PIN12__GPIO3_1 0x85 503 >; 504 }; 505 506 pinctrl_clk26mhz_usb: clk26mhzusbgrp { 507 fsl,pins = < 508 MX51_PAD_EIM_D17__GPIO2_1 0x85 509 >; 510 }; 511 512 pinctrl_ecspi1: ecspi1grp { 513 fsl,pins = < 514 MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 515 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 516 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 517 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ 518 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ 519 >; 520 }; 521 522 pinctrl_esdhc1: esdhc1grp { 523 fsl,pins = < 524 MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 525 MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 526 MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 527 MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 528 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 529 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 530 MX51_PAD_GPIO1_0__GPIO1_0 0x100 531 MX51_PAD_GPIO1_1__GPIO1_1 0x100 532 >; 533 }; 534 535 pinctrl_esdhc2: esdhc2grp { 536 fsl,pins = < 537 MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 538 MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 539 MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 540 MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 541 MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 542 MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 543 MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ 544 MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ 545 >; 546 }; 547 548 pinctrl_fec: fecgrp { 549 fsl,pins = < 550 MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 551 MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 552 MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 553 MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 554 MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 555 MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 556 MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 557 MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 558 MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 559 MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 560 MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 561 MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 562 MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 563 MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 564 MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 565 MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 566 MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 567 MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 568 MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ 569 >; 570 }; 571 572 pinctrl_gpio_keys: gpiokeysgrp { 573 fsl,pins = < 574 MX51_PAD_EIM_A27__GPIO2_21 0x5 575 >; 576 }; 577 578 pinctrl_gpio_leds: gpioledsgrp { 579 fsl,pins = < 580 MX51_PAD_EIM_D22__GPIO2_6 0x80000000 581 >; 582 }; 583 584 pinctrl_i2c1: i2c1grp { 585 fsl,pins = < 586 MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed 587 MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed 588 >; 589 }; 590 591 pinctrl_i2c2: i2c2grp { 592 fsl,pins = < 593 MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed 594 MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed 595 >; 596 }; 597 598 pinctrl_ipu_disp1: ipudisp1grp { 599 fsl,pins = < 600 MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 601 MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 602 MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 603 MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 604 MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 605 MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 606 MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 607 MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 608 MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 609 MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 610 MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 611 MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 612 MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 613 MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 614 MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 615 MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 616 MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 617 MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 618 MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 619 MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 620 MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 621 MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 622 MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 623 MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 624 MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 625 MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 626 >; 627 }; 628 629 pinctrl_ipu_disp2: ipudisp2grp { 630 fsl,pins = < 631 MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 632 MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 633 MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 634 MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 635 MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 636 MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 637 MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 638 MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 639 MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 640 MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 641 MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 642 MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 643 MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 644 MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 645 MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 646 MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 647 MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 648 MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 649 MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 650 MX51_PAD_DI_GP4__DI2_PIN15 0x5 651 >; 652 }; 653 654 pinctrl_kpp: kppgrp { 655 fsl,pins = < 656 MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 657 MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 658 MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 659 MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 660 MX51_PAD_KEY_COL0__KEY_COL0 0xe8 661 MX51_PAD_KEY_COL1__KEY_COL1 0xe8 662 MX51_PAD_KEY_COL2__KEY_COL2 0xe8 663 MX51_PAD_KEY_COL3__KEY_COL3 0xe8 664 >; 665 }; 666 667 pinctrl_pmic: pmicgrp { 668 fsl,pins = < 669 MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ 670 >; 671 }; 672 673 pinctrl_uart1: uart1grp { 674 fsl,pins = < 675 MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 676 MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 677 MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 678 MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 679 >; 680 }; 681 682 pinctrl_uart2: uart2grp { 683 fsl,pins = < 684 MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 685 MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 686 >; 687 }; 688 689 pinctrl_uart3: uart3grp { 690 fsl,pins = < 691 MX51_PAD_EIM_D25__UART3_RXD 0x1c5 692 MX51_PAD_EIM_D26__UART3_TXD 0x1c5 693 MX51_PAD_EIM_D27__UART3_RTS 0x1c5 694 MX51_PAD_EIM_D24__UART3_CTS 0x1c5 695 >; 696 }; 697 698 pinctrl_usbh1: usbh1grp { 699 fsl,pins = < 700 MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 701 MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 702 MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 703 MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 704 MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 705 MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 706 MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 707 MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 708 MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 709 MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 710 MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 711 >; 712 }; 713 714 pinctrl_usbh1reg: usbh1reggrp { 715 fsl,pins = < 716 MX51_PAD_EIM_D21__GPIO2_5 0x85 717 >; 718 }; 719 720 pinctrl_usbotgreg: usbotgreggrp { 721 fsl,pins = < 722 MX51_PAD_GPIO1_7__GPIO1_7 0x85 723 >; 724 }; 725 }; 726};