imx6dl-qmx6.dtsi (14135B)
1// SPDX-License-Identifier: GPL-2.0 or MIT 2// 3// Device Tree Source for i.MX6DL based congatec QMX6 4// System on Module 5// 6// Copyright 2018-2021 General Electric Company 7// Copyright 2018-2021 Collabora 8// Copyright 2016 congatec AG 9 10#include "imx6dl.dtsi" 11#include <dt-bindings/gpio/gpio.h> 12#include <dt-bindings/sound/fsl-imx-audmux.h> 13 14/ { 15 memory@10000000 { 16 reg = <0x10000000 0x40000000>; 17 }; 18 19 reg_3p3v: 3p3v { 20 compatible = "regulator-fixed"; 21 regulator-name = "3P3V"; 22 regulator-min-microvolt = <3300000>; 23 regulator-max-microvolt = <3300000>; 24 }; 25 26 i2cmux { 27 compatible = "i2c-mux-gpio"; 28 #address-cells = <1>; 29 #size-cells = <0>; 30 mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; 31 i2c-parent = <&i2c2>; 32 33 i2c5: i2c@0 { 34 reg = <0>; 35 #address-cells = <1>; 36 #size-cells = <0>; 37 }; 38 39 i2c6: i2c@1 { 40 reg = <1>; 41 #address-cells = <1>; 42 #size-cells = <0>; 43 }; 44 }; 45}; 46 47&audmux { 48 pinctrl-names = "default"; 49 pinctrl-0 = <&pinctrl_audmux>; 50 51 audmux_ssi1 { 52 fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; 53 fsl,port-config = < 54 (IMX_AUDMUX_V2_PTCR_TFSDIR | 55 IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) | 56 IMX_AUDMUX_V2_PTCR_TCLKDIR | 57 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) | 58 IMX_AUDMUX_V2_PTCR_SYN) 59 IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6) 60 >; 61 }; 62 63 audmux_aud6 { 64 fsl,audmux-port = <MX51_AUDMUX_PORT6>; 65 fsl,port-config = < 66 IMX_AUDMUX_V2_PTCR_SYN 67 IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) 68 >; 69 }; 70}; 71 72&clks { 73 clocks = <&rtc_sqw>; 74 clock-names = "ckil"; 75 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 76 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 77 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, 78 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; 79}; 80 81&ecspi1 { 82 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 83 pinctrl-names = "default"; 84 pinctrl-0 = <&pinctrl_spi1>; 85 status = "okay"; 86 87 flash@0 { 88 #address-cells = <1>; 89 #size-cells = <1>; 90 compatible = "sst,sst25vf032b", "jedec,spi-nor"; 91 spi-max-frequency = <20000000>; 92 reg = <0>; 93 94 partition@0 { 95 label = "bootloader"; 96 reg = <0x0000000 0x100000>; 97 }; 98 99 partition@100000 { 100 label = "user"; 101 reg = <0x0100000 0x2fc000>; 102 }; 103 104 partition@3fc000 { 105 label = "reserved"; 106 reg = <0x03fc000 0x4000>; 107 read-only; 108 }; 109 }; 110}; 111 112&fec { 113 pinctrl-names = "default"; 114 pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>; 115 phy-mode = "rgmii-id"; 116 phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; 117 fsl,magic-packet; 118 phy-handle = <&phy0>; 119 120 mdio { 121 #address-cells = <1>; 122 #size-cells = <0>; 123 124 phy0: ethernet-phy@6 { 125 reg = <6>; 126 qca,clk-out-frequency = <125000000>; 127 }; 128 }; 129}; 130 131&i2c1 { 132 clock-frequency = <100000>; 133 pinctrl-names = "default", "gpio"; 134 pinctrl-0 = <&pinctrl_i2c1>; 135 pinctrl-1 = <&pinctrl_i2c1_gpio>; 136 scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 137 sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 138 status = "okay"; 139}; 140 141&i2c2 { 142 clock-frequency = <100000>; 143 pinctrl-names = "default", "gpio"; 144 pinctrl-0 = <&pinctrl_i2c2>; 145 pinctrl-1 = <&pinctrl_i2c2_gpio>; 146 scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 147 sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 148 status = "okay"; 149}; 150 151&i2c3 { 152 clock-frequency = <100000>; 153 pinctrl-names = "default", "gpio"; 154 pinctrl-0 = <&pinctrl_i2c3>; 155 pinctrl-1 = <&pinctrl_i2c3_gpio>; 156 scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 157 sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 158 status = "okay"; 159 160 rtc: m41t62@68 { 161 compatible = "st,m41t62"; 162 reg = <0x68>; 163 164 rtc_sqw: clock { 165 compatible = "fixed-clock"; 166 #clock-cells = <0>; 167 clock-frequency = <32768>; 168 }; 169 }; 170}; 171 172&i2c6 { 173 pmic@8 { 174 compatible = "fsl,pfuze100"; 175 reg = <0x08>; 176 177 regulators { 178 sw1a_reg: sw1ab { 179 regulator-min-microvolt = <300000>; 180 regulator-max-microvolt = <1875000>; 181 regulator-boot-on; 182 regulator-always-on; 183 regulator-ramp-delay = <6250>; 184 }; 185 186 sw1c_reg: sw1c { 187 regulator-min-microvolt = <300000>; 188 regulator-max-microvolt = <1875000>; 189 regulator-boot-on; 190 regulator-always-on; 191 regulator-ramp-delay = <6250>; 192 }; 193 194 sw2_reg: sw2 { 195 regulator-min-microvolt = <800000>; 196 regulator-max-microvolt = <3300000>; 197 regulator-boot-on; 198 regulator-always-on; 199 }; 200 201 sw3a_reg: sw3a { 202 regulator-min-microvolt = <400000>; 203 regulator-max-microvolt = <1975000>; 204 regulator-boot-on; 205 regulator-always-on; 206 }; 207 208 sw3b_reg: sw3b { 209 regulator-min-microvolt = <400000>; 210 regulator-max-microvolt = <1975000>; 211 regulator-boot-on; 212 regulator-always-on; 213 }; 214 215 sw4_reg: sw4 { 216 regulator-min-microvolt = <675000>; 217 regulator-max-microvolt = <3300000>; 218 regulator-boot-on; 219 regulator-always-on; 220 }; 221 222 swbst_reg: swbst { 223 regulator-min-microvolt = <5000000>; 224 regulator-max-microvolt = <5150000>; 225 }; 226 227 snvs_reg: vsnvs { 228 regulator-min-microvolt = <1000000>; 229 regulator-max-microvolt = <3000000>; 230 regulator-boot-on; 231 regulator-always-on; 232 }; 233 234 vref_reg: vrefddr { 235 regulator-boot-on; 236 regulator-always-on; 237 }; 238 239 /* 240 * keep VGEN3, VGEN4 and VGEN5 enabled in order to 241 * maintain backward compatibility with hw-rev. A.0 242 */ 243 vgen3_reg: vgen3 { 244 regulator-min-microvolt = <1800000>; 245 regulator-max-microvolt = <3300000>; 246 regulator-always-on; 247 }; 248 249 vgen4_reg: vgen4 { 250 regulator-min-microvolt = <2500000>; 251 regulator-max-microvolt = <2500000>; 252 regulator-always-on; 253 }; 254 255 vgen5_reg: vgen5 { 256 regulator-min-microvolt = <1800000>; 257 regulator-max-microvolt = <3300000>; 258 regulator-always-on; 259 }; 260 261 /* supply voltage for eMMC */ 262 vgen6_reg: vgen6 { 263 regulator-min-microvolt = <1800000>; 264 regulator-max-microvolt = <1800000>; 265 regulator-boot-on; 266 regulator-always-on; 267 }; 268 }; 269 }; 270}; 271 272&pcie { 273 reset-gpio = <&gpio1 20 0>; 274}; 275 276&pwm4 { 277 pinctrl-names = "default"; 278 pinctrl-0 = <&pinctrl_pwm4>; 279}; 280 281®_arm { 282 vin-supply = <&sw1a_reg>; 283}; 284 285®_pu { 286 vin-supply = <&sw1c_reg>; 287}; 288 289®_soc { 290 vin-supply = <&sw1c_reg>; 291}; 292 293&snvs_poweroff { 294 status = "okay"; 295}; 296 297&uart2 { 298 pinctrl-names = "default"; 299 pinctrl-0 = <&pinctrl_uart2>; 300 status = "okay"; 301}; 302 303&uart3 { 304 pinctrl-names = "default"; 305 pinctrl-0 = <&pinctrl_uart3>; 306 status = "okay"; 307}; 308 309&usbh1 { 310 /* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */ 311 vbus-supply = <®_5v>; 312 status = "okay"; 313}; 314 315&usbotg { 316 pinctrl-names = "default"; 317 pinctrl-0 = <&pinctrl_usbotg>; 318}; 319 320&usdhc2 { 321 /* MicroSD card slot */ 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_usdhc2>; 324 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 325 no-1-8-v; 326 keep-power-in-suspend; 327 wakeup-source; 328 vmmc-supply = <®_3p3v>; 329 status = "okay"; 330}; 331 332&usdhc3 { 333 /* eMMC module */ 334 pinctrl-names = "default"; 335 pinctrl-0 = <&pinctrl_usdhc3>; 336 non-removable; 337 bus-width = <8>; 338 no-1-8-v; 339 keep-power-in-suspend; 340 wakeup-source; 341 vmmc-supply = <®_3p3v>; 342 status = "okay"; 343}; 344 345&wdog1 { 346 pinctrl-names = "default"; 347 pinctrl-0 = <&pinctrl_wdog>; 348 fsl,ext-reset-output; 349}; 350 351&iomuxc { 352 pinctrl-names = "default"; 353 pinctrl-0 = <&pinctrl_hog>; 354 355 qmx6mux: imx6qdl-qmx6 { 356 pinctrl_audmux: audmuxgrp { 357 fsl,pins = < 358 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x110b0 /* Q7[67] HDA_SDO */ 359 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x30b0 /* Q7[59] HDA_SYNC */ 360 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x30b0 /* Q7[65] HDA_SDI */ 361 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x30b0 /* Q7[63] HDA_BITCLK */ 362 >; 363 }; 364 365 /* PHY is on System on Module, Q7[3-15] have Ethernet lines */ 366 pinctrl_enet: enet { 367 fsl,pins = < 368 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 369 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 370 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 371 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 372 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 373 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 374 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 375 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 376 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 377 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 378 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 379 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 380 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 381 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 382 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 383 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 384 >; 385 }; 386 387 pinctrl_hog: hoggrp { 388 fsl,pins = < 389 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* PCIE_WAKE_B */ 390 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 /* I2C multiplexer */ 391 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* SD4_CD# */ 392 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* SD4_WP */ 393 MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* Camera MCLK */ 394 >; 395 }; 396 397 pinctrl_i2c1: i2c1 { 398 fsl,pins = < 399 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 /* Q7[66] I2C_CLK */ 400 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 /* Q7[68] I2C_DAT */ 401 >; 402 }; 403 404 pinctrl_i2c1_gpio: i2c1-gpio { 405 fsl,pins = < 406 MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /* Q7[66] I2C_CLK */ 407 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0 /* Q7[68] I2C_DAT */ 408 >; 409 }; 410 411 pinctrl_i2c2: i2c2 { 412 fsl,pins = < 413 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */ 414 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */ 415 >; 416 }; 417 418 pinctrl_i2c2_gpio: i2c2-gpio { 419 fsl,pins = < 420 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */ 421 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */ 422 >; 423 }; 424 425 pinctrl_i2c3: i2c3 { 426 fsl,pins = < 427 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 /* Q7[60] SMB_CLK */ 428 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 /* Q7[62] SMB_DAT */ 429 >; 430 }; 431 432 pinctrl_i2c3_gpio: i2c3-gpio { 433 fsl,pins = < 434 MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 /* Q7[60] SMB_CLK */ 435 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* Q7[62] SMB_DAT */ 436 >; 437 }; 438 439 pinctrl_phy_reset: phy-reset { 440 fsl,pins = < 441 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* RGMII Phy Reset */ 442 >; 443 }; 444 445 pinctrl_pwm4: pwm4 { 446 fsl,pins = < 447 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */ 448 >; 449 }; 450 451 pinctrl_q7_backlight_enable: q7-backlight-enable { 452 fsl,pins = < 453 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* Q7[112] LVDS_BLEN */ 454 >; 455 }; 456 457 pinctrl_q7_gpio0: q7-gpio0 { 458 fsl,pins = < 459 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /* Q7[185] GPIO0 */ 460 >; 461 }; 462 463 pinctrl_q7_gpio1: q7-gpio1 { 464 fsl,pins = < 465 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* Q7[186] GPIO1 */ 466 >; 467 }; 468 469 pinctrl_q7_gpio2: q7-gpio2 { 470 fsl,pins = < 471 MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 /* Q7[187] GPIO2 */ 472 >; 473 }; 474 475 pinctrl_q7_gpio3: q7-gpio3 { 476 fsl,pins = < 477 MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 /* Q7[188] GPIO3 */ 478 >; 479 }; 480 481 pinctrl_q7_gpio4: q7-gpio4 { 482 fsl,pins = < 483 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* Q7[189] GPIO4 */ 484 >; 485 }; 486 487 pinctrl_q7_gpio5: q7-gpio5 { 488 fsl,pins = < 489 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* Q7[190] GPIO5 */ 490 >; 491 }; 492 493 pinctrl_q7_gpio6: q7-gpio6 { 494 fsl,pins = < 495 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */ 496 >; 497 }; 498 499 pinctrl_q7_gpio7: q7-gpio7 { 500 fsl,pins = < 501 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* Q7[192] GPIO7 */ 502 >; 503 }; 504 505 pinctrl_q7_hda_reset: q7-hda-reset { 506 fsl,pins = < 507 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 /* Q7[61] HDA_RST_N */ 508 >; 509 }; 510 511 pinctrl_q7_lcd_power: lcd-power { 512 fsl,pins = < 513 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* Q7[111] LVDS_PPEN */ 514 >; 515 }; 516 517 pinctrl_q7_sdio_power: q7-sdio-power { 518 fsl,pins = < 519 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 /* Q7[47] SDIO_PWR# */ 520 >; 521 }; 522 523 pinctrl_q7_sleep_button: q7-sleep-button { 524 fsl,pins = < 525 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* Q7[21] SLP_BTN# */ 526 >; 527 }; 528 529 pinctrl_q7_spi_cs1: spi-cs1 { 530 fsl,pins = < 531 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 /* Q7[202] SPI_CS1# */ 532 >; 533 }; 534 535 /* SPI1 bus does not leave System on Module */ 536 pinctrl_spi1: spi1 { 537 fsl,pins = < 538 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 539 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 540 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 541 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 542 >; 543 }; 544 545 /* Debug connector on Q7 module */ 546 pinctrl_uart2: uart2 { 547 fsl,pins = < 548 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 549 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 550 >; 551 }; 552 553 pinctrl_uart3: uart3 { 554 fsl,pins = < 555 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 /* Q7[177] UART0_RX */ 556 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 /* Q7[171] UART0_TX */ 557 >; 558 }; 559 560 pinctrl_usbotg: usbotg { 561 fsl,pins = < 562 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */ 563 >; 564 }; 565 566 /* µSD card slot on Q7 module */ 567 pinctrl_usdhc2: usdhc2 { 568 fsl,pins = < 569 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 570 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 571 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 572 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 573 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 574 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 575 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2_CD */ 576 >; 577 }; 578 579 /* eMMC module on Q7 module */ 580 pinctrl_usdhc3: usdhc3 { 581 fsl,pins = < 582 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 583 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 584 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 585 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 586 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 587 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 588 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 589 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 590 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 591 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 592 >; 593 }; 594 595 pinctrl_usdhc4: usdhc4 { 596 fsl,pins = < 597 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 /* Q7[45] SDIO_CMD */ 598 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 /* Q7[42] SDIO_CLK */ 599 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 /* Q7[48] SDIO_DAT1 */ 600 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 /* Q7[49] SDIO_DAT0 */ 601 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 /* Q7[50] SDIO_DAT3 */ 602 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 /* Q7[51] SDIO_DAT2 */ 603 >; 604 }; 605 606 pinctrl_wdog: wdog { 607 fsl,pins = < 608 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 /* Watchdog output signal */ 609 >; 610 }; 611 }; 612};