imx6dl-riotboard.dts (14182B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright 2014 Iain Paton <ipaton0@gmail.com> 4 */ 5 6/dts-v1/; 7#include "imx6dl.dtsi" 8#include <dt-bindings/gpio/gpio.h> 9 10/ { 11 model = "RIoTboard i.MX6S"; 12 compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; 13 14 memory@10000000 { 15 device_type = "memory"; 16 reg = <0x10000000 0x40000000>; 17 }; 18 19 chosen { 20 stdout-path = "serial1:115200n8"; 21 }; 22 23 leds { 24 compatible = "gpio-leds"; 25 pinctrl-names = "default"; 26 pinctrl-0 = <&pinctrl_led>; 27 28 led0: user1 { 29 label = "user1"; 30 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; 31 default-state = "on"; 32 linux,default-trigger = "heartbeat"; 33 }; 34 35 led1: user2 { 36 label = "user2"; 37 gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; 38 default-state = "off"; 39 }; 40 }; 41 42 sound { 43 compatible = "fsl,imx-audio-sgtl5000"; 44 model = "imx6-riotboard-sgtl5000"; 45 ssi-controller = <&ssi1>; 46 audio-codec = <&codec>; 47 audio-routing = 48 "MIC_IN", "Mic Jack", 49 "Mic Jack", "Mic Bias", 50 "Headphone Jack", "HP_OUT"; 51 mux-int-port = <1>; 52 mux-ext-port = <3>; 53 }; 54 55 reg_2p5v: regulator-2p5v { 56 compatible = "regulator-fixed"; 57 regulator-name = "2P5V"; 58 regulator-min-microvolt = <2500000>; 59 regulator-max-microvolt = <2500000>; 60 }; 61 62 reg_3p3v: regulator-3p3v { 63 compatible = "regulator-fixed"; 64 regulator-name = "3P3V"; 65 regulator-min-microvolt = <3300000>; 66 regulator-max-microvolt = <3300000>; 67 }; 68 69 reg_usb_otg_vbus: regulator-usbotgvbus { 70 compatible = "regulator-fixed"; 71 regulator-name = "usb_otg_vbus"; 72 regulator-min-microvolt = <5000000>; 73 regulator-max-microvolt = <5000000>; 74 gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; 75 }; 76}; 77 78&audmux { 79 pinctrl-names = "default"; 80 pinctrl-0 = <&pinctrl_audmux>; 81 status = "okay"; 82}; 83 84&clks { 85 fsl,pmic-stby-poweroff; 86}; 87 88&fec { 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pinctrl_enet>; 91 phy-mode = "rgmii-id"; 92 phy-handle = <&rgmii_phy>; 93 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, 94 <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; 95 fsl,err006687-workaround-present; 96 status = "okay"; 97 98 mdio { 99 #address-cells = <1>; 100 #size-cells = <0>; 101 102 /* Atheros AR8035 PHY */ 103 rgmii_phy: ethernet-phy@4 { 104 reg = <4>; 105 interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; 106 reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; 107 reset-assert-us = <10000>; 108 reset-deassert-us = <1000>; 109 qca,smarteee-tw-us-1g = <24>; 110 qca,clk-out-frequency = <125000000>; 111 }; 112 }; 113}; 114 115&gpio1 { 116 gpio-line-names = 117 "", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL", 118 "I2C3_SDA", "I2C4_SCL", 119 "I2C4_SDA", "", "", "", "", "", "", "", 120 "", "PWM3", "", "", "", "", "", "", 121 "", "", "", "", "", "", "", ""; 122}; 123 124&gpio3 { 125 gpio-line-names = 126 "", "", "", "", "", "", "", "", 127 "", "", "", "", "", "", "", "", 128 "", "", "", "", "", "", "USB_OTG_VBUS", "", 129 "UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", ""; 130}; 131 132&gpio4 { 133 gpio-line-names = 134 "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", 135 "UART5_TXD", "UART5_RXD", "", "", "", "", "", "", 136 "GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "", 137 "CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO", 138 "CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27", 139 "CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31"; 140}; 141 142&gpio5 { 143 gpio-line-names = 144 "", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06", 145 "GPIO5_07", 146 "GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO", 147 "CSPI2_CS0", "CSPI2_CLK", "", "", 148 "", "", "", "", "", "", "", "", 149 "", "", "", "", "", "", "", ""; 150}; 151 152&gpio7 { 153 gpio-line-names = 154 "SD3_CD", "SD3_WP", "", "", "", "", "", "", 155 "", "", "", "", "", "", "", "", 156 "", "", "", "", "", "", "", "", 157 "", "", "", "", "", "", "", ""; 158}; 159 160&hdmi { 161 ddc-i2c-bus = <&i2c2>; 162 status = "okay"; 163}; 164 165&i2c1 { 166 clock-frequency = <100000>; 167 pinctrl-names = "default"; 168 pinctrl-0 = <&pinctrl_i2c1>; 169 status = "okay"; 170 171 codec: sgtl5000@a { 172 compatible = "fsl,sgtl5000"; 173 reg = <0x0a>; 174 clocks = <&clks IMX6QDL_CLK_CKO>; 175 VDDA-supply = <®_2p5v>; 176 VDDIO-supply = <®_3p3v>; 177 }; 178 179 pmic: pf0100@8 { 180 compatible = "fsl,pfuze100"; 181 reg = <0x08>; 182 interrupt-parent = <&gpio5>; 183 interrupts = <16 8>; 184 fsl,pmic-stby-poweroff; 185 186 regulators { 187 reg_vddcore: sw1ab { /* VDDARM_IN */ 188 regulator-min-microvolt = <300000>; 189 regulator-max-microvolt = <1875000>; 190 regulator-always-on; 191 }; 192 193 reg_vddsoc: sw1c { /* VDDSOC_IN */ 194 regulator-min-microvolt = <300000>; 195 regulator-max-microvolt = <1875000>; 196 regulator-always-on; 197 }; 198 199 reg_gen_3v3: sw2 { /* VDDHIGH_IN */ 200 regulator-min-microvolt = <800000>; 201 regulator-max-microvolt = <3300000>; 202 regulator-always-on; 203 }; 204 205 reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */ 206 regulator-min-microvolt = <400000>; 207 regulator-max-microvolt = <1975000>; 208 regulator-always-on; 209 }; 210 211 reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */ 212 regulator-min-microvolt = <400000>; 213 regulator-max-microvolt = <1975000>; 214 regulator-always-on; 215 }; 216 217 reg_ddr_vtt: sw4 { /* MIPI conn */ 218 regulator-min-microvolt = <400000>; 219 regulator-max-microvolt = <1975000>; 220 regulator-always-on; 221 }; 222 223 reg_5v_600mA: swbst { /* not used */ 224 regulator-min-microvolt = <5000000>; 225 regulator-max-microvolt = <5150000>; 226 }; 227 228 reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */ 229 regulator-min-microvolt = <1500000>; 230 regulator-max-microvolt = <3000000>; 231 regulator-always-on; 232 }; 233 234 vref_reg: vrefddr { /* VREF_DDR */ 235 regulator-boot-on; 236 regulator-always-on; 237 }; 238 239 reg_vgen1_1v5: vgen1 { /* not used */ 240 regulator-min-microvolt = <800000>; 241 regulator-max-microvolt = <1550000>; 242 }; 243 244 reg_vgen2_1v2_eth: vgen2 { /* pcie ? */ 245 regulator-min-microvolt = <800000>; 246 regulator-max-microvolt = <1550000>; 247 regulator-always-on; 248 }; 249 250 reg_vgen3_2v8: vgen3 { /* not used */ 251 regulator-min-microvolt = <1800000>; 252 regulator-max-microvolt = <3300000>; 253 }; 254 reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */ 255 regulator-min-microvolt = <1800000>; 256 regulator-max-microvolt = <3300000>; 257 regulator-always-on; 258 }; 259 260 reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */ 261 regulator-min-microvolt = <1800000>; 262 regulator-max-microvolt = <3300000>; 263 regulator-always-on; 264 }; 265 266 reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */ 267 regulator-min-microvolt = <1800000>; 268 regulator-max-microvolt = <3300000>; 269 regulator-always-on; 270 }; 271 }; 272 }; 273}; 274 275&i2c2 { 276 clock-frequency = <100000>; 277 pinctrl-names = "default"; 278 pinctrl-0 = <&pinctrl_i2c2>; 279 status = "okay"; 280}; 281 282&i2c4 { 283 clock-frequency = <100000>; 284 pinctrl-names = "default"; 285 pinctrl-0 = <&pinctrl_i2c4>; 286 clocks = <&clks 116>; 287 status = "okay"; 288}; 289 290&pwm1 { 291 pinctrl-names = "default"; 292 pinctrl-0 = <&pinctrl_pwm1>; 293 status = "okay"; 294}; 295 296&pwm2 { 297 pinctrl-names = "default"; 298 pinctrl-0 = <&pinctrl_pwm2>; 299 status = "okay"; 300}; 301 302&pwm3 { 303 pinctrl-names = "default"; 304 pinctrl-0 = <&pinctrl_pwm3>; 305 status = "okay"; 306}; 307 308&pwm4 { 309 pinctrl-names = "default"; 310 pinctrl-0 = <&pinctrl_pwm4>; 311 status = "okay"; 312}; 313 314&ssi1 { 315 status = "okay"; 316}; 317 318&uart1 { 319 pinctrl-names = "default"; 320 pinctrl-0 = <&pinctrl_uart1>; 321 status = "okay"; 322}; 323 324&uart2 { 325 pinctrl-names = "default"; 326 pinctrl-0 = <&pinctrl_uart2>; 327 status = "okay"; 328}; 329 330&uart3 { 331 pinctrl-names = "default"; 332 pinctrl-0 = <&pinctrl_uart3>; 333 status = "okay"; 334}; 335 336&uart4 { 337 pinctrl-names = "default"; 338 pinctrl-0 = <&pinctrl_uart4>; 339 status = "okay"; 340}; 341 342&uart5 { 343 pinctrl-names = "default"; 344 pinctrl-0 = <&pinctrl_uart5>; 345 status = "okay"; 346}; 347 348&usbh1 { 349 dr_mode = "host"; 350 disable-over-current; 351 status = "okay"; 352}; 353 354&usbotg { 355 vbus-supply = <®_usb_otg_vbus>; 356 pinctrl-names = "default"; 357 pinctrl-0 = <&pinctrl_usbotg>; 358 disable-over-current; 359 dr_mode = "otg"; 360 status = "okay"; 361}; 362 363&usdhc2 { 364 pinctrl-names = "default"; 365 pinctrl-0 = <&pinctrl_usdhc2>; 366 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 367 wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; 368 vmmc-supply = <®_3p3v>; 369 status = "okay"; 370}; 371 372&usdhc3 { 373 pinctrl-names = "default"; 374 pinctrl-0 = <&pinctrl_usdhc3>; 375 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 376 wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 377 vmmc-supply = <®_3p3v>; 378 status = "okay"; 379}; 380 381&usdhc4 { 382 pinctrl-names = "default"; 383 pinctrl-0 = <&pinctrl_usdhc4>; 384 vmmc-supply = <®_3p3v>; 385 non-removable; 386 status = "okay"; 387}; 388 389&iomuxc { 390 pinctrl-names = "default"; 391 392 imx6-riotboard { 393 pinctrl_audmux: audmuxgrp { 394 fsl,pins = < 395 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 396 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 397 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 398 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 399 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ 400 >; 401 }; 402 403 pinctrl_ecspi1: ecspi1grp { 404 fsl,pins = < 405 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 406 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 407 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 408 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */ 409 >; 410 }; 411 412 pinctrl_ecspi2: ecspi2grp { 413 fsl,pins = < 414 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */ 415 MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 416 MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 417 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */ 418 MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 419 >; 420 }; 421 422 pinctrl_ecspi3: ecspi3grp { 423 fsl,pins = < 424 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 425 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 426 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 427 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */ 428 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */ 429 >; 430 }; 431 432 pinctrl_enet: enetgrp { 433 fsl,pins = < 434 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 435 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 436 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 437 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 438 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 439 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 440 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 441 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 442 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ 443 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: IO voltage: pull up */ 444 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#0: pull down */ 445 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ 446 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#1: pull up */ 447 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ 448 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ 449 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ 450 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ 451 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ 452 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 453 >; 454 }; 455 456 pinctrl_i2c1: i2c1grp { 457 fsl,pins = < 458 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 459 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 460 >; 461 }; 462 463 pinctrl_i2c2: i2c2grp { 464 fsl,pins = < 465 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 466 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 467 >; 468 }; 469 470 pinctrl_i2c3: i2c3grp { 471 fsl,pins = < 472 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 473 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 474 >; 475 }; 476 477 pinctrl_i2c4: i2c4grp { 478 fsl,pins = < 479 MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 480 MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 481 >; 482 }; 483 484 pinctrl_led: ledgrp { 485 fsl,pins = < 486 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* user led0 */ 487 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* user led1 */ 488 >; 489 }; 490 491 pinctrl_pwm1: pwm1grp { 492 fsl,pins = < 493 MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 494 >; 495 }; 496 497 pinctrl_pwm2: pwm2grp { 498 fsl,pins = < 499 MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 500 >; 501 }; 502 503 pinctrl_pwm3: pwm3grp { 504 fsl,pins = < 505 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 506 >; 507 }; 508 509 pinctrl_pwm4: pwm4grp { 510 fsl,pins = < 511 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 512 >; 513 }; 514 515 pinctrl_uart1: uart1grp { 516 fsl,pins = < 517 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 518 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 519 >; 520 }; 521 522 pinctrl_uart2: uart2grp { 523 fsl,pins = < 524 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 525 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 526 >; 527 }; 528 529 pinctrl_uart3: uart3grp { 530 fsl,pins = < 531 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 532 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 533 >; 534 }; 535 536 pinctrl_uart4: uart4grp { 537 fsl,pins = < 538 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 539 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 540 >; 541 }; 542 543 pinctrl_uart5: uart5grp { 544 fsl,pins = < 545 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 546 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 547 >; 548 }; 549 550 pinctrl_usbotg: usbotggrp { 551 fsl,pins = < 552 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 553 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ 554 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 555 >; 556 }; 557 558 pinctrl_usdhc2: usdhc2grp { 559 fsl,pins = < 560 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 561 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 562 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 563 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 564 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 565 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 566 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2 CD */ 567 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* SD2 WP */ 568 >; 569 }; 570 571 pinctrl_usdhc3: usdhc3grp { 572 fsl,pins = < 573 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 574 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 575 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 576 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 577 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 578 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 579 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* SD3 CD */ 580 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* SD3 WP */ 581 >; 582 }; 583 584 pinctrl_usdhc4: usdhc4grp { 585 fsl,pins = < 586 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 587 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 588 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 589 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 590 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 591 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 592 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x17059 /* SD4 RST (eMMC) */ 593 >; 594 }; 595 }; 596};