imx6q-bosch-acc.dts (16563B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Support for the i.MX6-based Bosch ACC board. 4 * 5 * Copyright (C) 2016 Garz & Fricke GmbH 6 * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de> 7 * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de> 8 * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com> 9 * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de> 10 */ 11 12/dts-v1/; 13 14#include <dt-bindings/gpio/gpio.h> 15#include <dt-bindings/leds/common.h> 16#include "imx6q.dtsi" 17 18/ { 19 model = "Bosch ACC"; 20 compatible = "bosch,imx6q-acc", "fsl,imx6q"; 21 22 aliases { 23 i2c0 = &i2c1; 24 i2c1 = &i2c2; 25 i2c2 = &i2c3; 26 mmc0 = &usdhc4; 27 mmc1 = &usdhc2; 28 serial0 = &uart2; 29 serial1 = &uart1; 30 }; 31 32 memory@10000000 { 33 device_type = "memory"; 34 reg = <0x10000000 0x40000000>; 35 }; 36 37 backlight_lvds: backlight-lvds { 38 compatible = "pwm-backlight"; 39 pwms = <&pwm1 0 200000>; 40 brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; 41 num-interpolated-steps = <10>; 42 default-brightness-level = <60>; 43 power-supply = <®_lcd>; 44 }; 45 46 panel { 47 compatible = "dataimage,fg1001l0dsswmg01"; 48 backlight = <&backlight_lvds>; 49 50 port { 51 panel_in: endpoint { 52 remote-endpoint = <&lvds0_out>; 53 }; 54 }; 55 }; 56 57 refclk: refclk { 58 compatible = "fixed-factor-clock"; 59 #clock-cells = <0>; 60 clocks = <&clks IMX6QDL_CLK_CKO2>; 61 clock-div = <1>; 62 clock-mult = <1>; 63 clock-output-names = "12mhz_refclk"; 64 assigned-clocks = <&clks IMX6QDL_CLK_CKO>, 65 <&clks IMX6QDL_CLK_CKO2>, 66 <&clks IMX6QDL_CLK_CKO2_SEL>; 67 assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>, 68 <&clks IMX6QDL_CLK_CKO2_PODF>, 69 <&clks IMX6QDL_CLK_OSC>; 70 assigned-clock-rates = <0>, <12000000>, <0>; 71 }; 72 73 cpus { 74 cpu0: cpu@0 { 75 operating-points = < 76 /* kHz uV */ 77 1200000 1275000 78 996000 1225000 79 852000 1225000 80 792000 1150000 81 396000 950000 82 >; 83 fsl,soc-operating-points = < 84 /* ARM kHz SOC-PU uV */ 85 1200000 1225000 86 996000 1175000 87 852000 1175000 88 792000 1150000 89 396000 1150000 90 >; 91 }; 92 93 cpu1: cpu@1 { 94 operating-points = < 95 /* kHz uV */ 96 1200000 1275000 97 996000 1225000 98 852000 1225000 99 792000 1150000 100 396000 950000 101 >; 102 fsl,soc-operating-points = < 103 /* ARM kHz SOC-PU uV */ 104 1200000 1225000 105 996000 1175000 106 852000 1175000 107 792000 1150000 108 396000 1150000 109 >; 110 }; 111 }; 112 113 pwm-leds { 114 compatible = "pwm-leds"; 115 116 led_red: led-0 { 117 color = <LED_COLOR_ID_RED>; 118 max-brightness = <248>; 119 default-state = "off"; 120 pwms = <&pwm2 0 500000>; 121 }; 122 123 led_white: led-1 { 124 color = <LED_COLOR_ID_WHITE>; 125 max-brightness = <248>; 126 default-state = "off"; 127 pwms = <&pwm3 0 500000>; 128 linux,default-trigger = "heartbeat"; 129 }; 130 }; 131 132 gpio-leds { 133 compatible = "gpio-leds"; 134 pinctrl-names = "default"; 135 pinctrl-0 = <&pinctrl_reset_gpio_led>; 136 137 led-2 { 138 color = <LED_COLOR_ID_RED>; 139 gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; 140 default-state = "off"; 141 }; 142 }; 143 144 reg_5p0: regulator-5p0 { 145 compatible = "regulator-fixed"; 146 regulator-name = "5p0"; 147 }; 148 149 reg_vin: regulator-vin { 150 compatible = "regulator-fixed"; 151 regulator-name = "VIN"; 152 regulator-min-microvolt = <4500000>; 153 regulator-max-microvolt = <4500000>; 154 regulator-always-on; 155 vin-supply = <®_5p0>; 156 }; 157 158 reg_usb_otg_vbus: regulator-usb-otg-vbus { 159 compatible = "regulator-fixed"; 160 regulator-name = "usb_otg_vbus"; 161 regulator-min-microvolt = <5000000>; 162 regulator-max-microvolt = <5000000>; 163 }; 164 165 reg_usb_h1_vbus: regulator-usb-h1-vbus { 166 compatible = "regulator-fixed"; 167 regulator-name = "usb_h1_vbus"; 168 regulator-min-microvolt = <5000000>; 169 regulator-max-microvolt = <5000000>; 170 regulator-always-on; 171 vin-supply = <®_5p0>; 172 }; 173 174 reg_usb_h2_vbus: regulator-usb-h2-vbus { 175 compatible = "regulator-fixed"; 176 regulator-name = "usb_h2_vbus"; 177 regulator-min-microvolt = <5000000>; 178 regulator-max-microvolt = <5000000>; 179 vin-supply = <®_5p0> ; 180 regulator-always-on; 181 }; 182 183 reg_vsnvs: regulator-vsnvs { 184 compatible = "regulator-fixed"; 185 regulator-name = "VSNVS_3V0"; 186 regulator-min-microvolt = <3000000>; 187 regulator-max-microvolt = <3000000>; 188 regulator-always-on; 189 vin-supply = <®_5p0>; 190 }; 191 192 reg_lcd: regulator-lcd { 193 compatible = "regulator-fixed"; 194 regulator-name = "LCD0 POWER"; 195 regulator-min-microvolt = <5000000>; 196 regulator-max-microvolt = <5000000>; 197 pinctrl-names = "default"; 198 pinctrl-0 = <&pinctrl_lcd_enable>; 199 gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; 200 enable-active-high; 201 regulator-boot-on; 202 }; 203 204 reg_dac: regulator-dac { 205 compatible = "regulator-fixed"; 206 regulator-name = "vref_dac"; 207 regulator-min-microvolt = <20000>; 208 regulator-max-microvolt = <20000>; 209 vin-supply = <®_5p0> ; 210 regulator-boot-on; 211 }; 212 213 reg_sw4: regulator-sw4 { 214 compatible = "regulator-fixed"; 215 regulator-name = "SW4_3V3"; 216 regulator-min-microvolt = <3300000>; 217 regulator-max-microvolt = <3300000>; 218 regulator-always-on; 219 vin-supply = <®_5p0>; 220 }; 221 222 reg_sys: regulator-sys { 223 compatible = "regulator-fixed"; 224 regulator-name = "SYS_4V2"; 225 regulator-min-microvolt = <4200000>; 226 regulator-max-microvolt = <4200000>; 227 regulator-always-on; 228 vin-supply = <®_5p0>; 229 }; 230}; 231 232®_arm { 233 vin-supply = <&sw2_reg>; 234}; 235 236®_soc { 237 vin-supply = <&sw1c_reg>; 238}; 239 240®_vdd1p1 { 241 vin-supply = <®_vsnvs>; 242}; 243 244®_vdd2p5 { 245 vin-supply = <®_vsnvs>; 246}; 247 248®_vdd3p0 { 249 vin-supply = <®_vsnvs>; 250}; 251 252&fec { 253 pinctrl-names = "default"; 254 pinctrl-0 = <&pinctrl_enet>; 255 clocks = <&clks IMX6QDL_CLK_ENET>, 256 <&clks IMX6QDL_CLK_ENET>, 257 <&clks IMX6QDL_CLK_ENET>, 258 <&clks IMX6QDL_CLK_ENET_REF>; 259 clock-names = "ipg", "ahb", "ptp", "enet_out"; 260 phy-mode = "rmii"; 261 phy-supply = <®_sw4>; 262 phy-handle = <ðphy>; 263 status = "okay"; 264 265 mdio { 266 #address-cells = <1>; 267 #size-cells = <0>; 268 269 ethphy: ethernet-phy@0 { 270 compatible = "ethernet-phy-ieee802.3-c22"; 271 reg = <0>; 272 interrupt-parent = <&gpio1>; 273 interrupts = <23 IRQ_TYPE_EDGE_FALLING>; 274 smsc,disable-energy-detect; 275 }; 276 }; 277}; 278 279&gpu_vg { 280 status = "disabled"; 281}; 282 283&gpu_2d { 284 status = "disabled"; 285}; 286 287&i2c1 { 288 pinctrl-names = "default"; 289 pinctrl-0 = <&pinctrl_i2c1>; 290 clock-frequency = <400000>; 291 status = "okay"; 292 293 pmic: pmic@8 { 294 compatible = "fsl,pfuze100"; 295 reg = <0x08>; 296 297 regulators { 298 sw1c_reg: sw1c { 299 regulator-name = "VDD_SOC (sw1abc)"; 300 regulator-min-microvolt = <1275000>; 301 regulator-max-microvolt = <1500000>; 302 regulator-boot-on; 303 regulator-always-on; 304 regulator-ramp-delay = <6250>; 305 }; 306 307 sw2_reg: sw2 { 308 regulator-name = "VDD_ARM (sw2)"; 309 regulator-min-microvolt = <1050000>; 310 regulator-max-microvolt = <1500000>; 311 regulator-boot-on; 312 regulator-always-on; 313 regulator-ramp-delay = <6250>; 314 }; 315 316 sw3a_reg: sw3a { 317 compatible = "regulator-fixed"; 318 regulator-name = "DDR_1V5a"; 319 regulator-boot-on; 320 regulator-always-on; 321 322 }; 323 324 sw3b_reg: sw3b { 325 compatible = "regulator-fixed"; 326 regulator-name = "DDR_1V5b"; 327 regulator-boot-on; 328 regulator-always-on; 329 330 }; 331 332 sw4_reg: sw4 { 333 regulator-name = "AUX 3V15 (sw4)"; 334 regulator-min-microvolt = <800000>; 335 regulator-max-microvolt = <3300000>; 336 }; 337 338 swbst_reg: swbst { 339 regulator-min-microvolt = <5000000>; 340 regulator-max-microvolt = <5150000>; 341 regulator-boot-on; 342 regulator-always-on; 343 status = "disabled"; 344 }; 345 346 snvs_reg: vsnvs { 347 regulator-min-microvolt = <1200000>; 348 regulator-max-microvolt = <3000000>; 349 regulator-boot-on; 350 regulator-always-on; 351 }; 352 353 vref_reg: vrefddr { 354 regulator-boot-on; 355 regulator-always-on; 356 }; 357 358 vgen1_reg: vgen1 { 359 regulator-min-microvolt = <800000>; 360 regulator-max-microvolt = <1550000>; 361 regulator-always-on; 362 }; 363 364 vgen2_reg: vgen2 { 365 regulator-min-microvolt = <800000>; 366 regulator-max-microvolt = <1550000>; 367 regulator-always-on; 368 }; 369 370 vgen3_reg: vgen3 { 371 regulator-min-microvolt = <1800000>; 372 regulator-max-microvolt = <3300000>; 373 regulator-always-on; 374 }; 375 376 vgen4_reg: vgen4 { 377 regulator-min-microvolt = <1800000>; 378 regulator-max-microvolt = <3300000>; 379 regulator-always-on; 380 regulator-boot-on; 381 }; 382 383 vgen5_reg: vgen5 { 384 regulator-min-microvolt = <1800000>; 385 regulator-max-microvolt = <3300000>; 386 regulator-always-on; 387 regulator-boot-on; 388 }; 389 390 vgen6_reg: vgen6 { 391 regulator-min-microvolt = <1800000>; 392 regulator-max-microvolt = <3300000>; 393 regulator-always-on; 394 }; 395 }; 396 }; 397 398 lm75: sensor@49 { 399 compatible = "national,lm75b"; 400 pinctrl-names = "default"; 401 pinctrl-0 = <&pinctrl_lm75>; 402 reg = <0x49>; 403 }; 404 405 eeprom: eeprom@50 { 406 compatible = "atmel,24c32"; 407 reg = <0x50>; 408 pagesize = <32>; 409 }; 410 411 rtc: rtc@51 { 412 pinctrl-names = "default"; 413 pinctrl-0 = <&pinctrl_rtc>; 414 compatible = "nxp,pcf8563"; 415 reg = <0x51>; 416 }; 417}; 418 419&i2c2 { 420 pinctrl-names = "default"; 421 pinctrl-0 = <&pinctrl_i2c2>; 422 clock-frequency = <100000>; 423 status = "okay"; 424 425 eeprom_ext: eeprom@50 { 426 compatible = "atmel,24c32"; 427 reg = <0x50>; 428 pagesize = <32>; 429 }; 430}; 431 432&i2c3 { 433 pinctrl-names = "default"; 434 pinctrl-0 = <&pinctrl_i2c3>; 435 clock-frequency = <400000>; 436 status = "okay"; 437 438 usb3503: usb@8 { 439 compatible = "smsc,usb3503"; 440 pinctrl-names = "default"; 441 pinctrl-0 = <&pinctrl_usb3503>; 442 reg = <0x08>; 443 connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */ 444 intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */ 445 reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */ 446 initial-mode = <1>; 447 clocks = <&refclk>; 448 clock-names = "refclk"; 449 refclk-frequency = <12000000>; 450 }; 451 452 exc3000: touchscreen@2a { 453 compatible = "eeti,exc3000"; 454 reg = <0x2a>; 455 pinctrl-names = "default"; 456 pinctrl-0 = <&pinctrl_ctouch>; 457 interrupt-parent = <&gpio4>; 458 interrupts = <6 IRQ_TYPE_LEVEL_LOW>; 459 touchscreen-size-x = <4096>; 460 touchscreen-size-y = <4096>; 461 }; 462 463 vcnl4035: light-sensor@60 { 464 compatible = "vishay,vcnl4035"; 465 pinctrl-names = "default"; 466 pinctrl-0 = <&pinctrl_proximity>; 467 reg = <0x60>; 468 }; 469}; 470 471&ldb { 472 status = "okay"; 473 474 lvds0: lvds-channel@0 { 475 fsl,data-mapping = "spwg"; 476 fsl,data-width = <24>; 477 478 port@4 { 479 reg = <4>; 480 481 lvds0_out: endpoint { 482 remote-endpoint = <&panel_in>; 483 }; 484 }; 485 }; 486}; 487 488&pwm1 { 489 #pwm-cells = <2>; 490 pinctrl-names = "default"; 491 pinctrl-0 = <&pinctrl_pwm1>; 492 status = "okay"; 493}; 494 495&pwm2 { 496 #pwm-cells = <2>; 497 pinctrl-names = "default"; 498 pinctrl-0 = <&pinctrl_pwm2>; 499 status = "okay"; 500}; 501 502&pwm3 { 503 #pwm-cells = <2>; 504 pinctrl-names = "default"; 505 pinctrl-0 = <&pinctrl_pwm3>; 506 status = "okay"; 507}; 508 509&pwm4 { 510 #pwm-cells = <2>; 511 pinctrl-names = "default"; 512 pinctrl-0 = <&pinctrl_pwm4>; 513 status = "okay"; 514}; 515 516&uart1 { 517 pinctrl-names = "default"; 518 pinctrl-0 = <&pinctrl_uart1>; 519 rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; 520 linux,rs485-enabled-at-boot-time; 521 rs485-rx-during-tx; 522 status = "okay"; 523}; 524 525&uart2 { 526 pinctrl-names = "default"; 527 pinctrl-0 = <&pinctrl_uart2>; 528 uart-has-rtscts; 529 status = "okay"; 530}; 531 532&usbh1 { 533 vbus-supply = <®_usb_h1_vbus>; 534 status = "okay"; 535}; 536 537&usbh2 { 538 pinctrl-names = "idle", "active"; 539 pinctrl-0 = <&pinctrl_usbh2_idle>; 540 pinctrl-1 = <&pinctrl_usbh2_active>; 541 vbus-supply = <®_usb_h2_vbus>; 542 status = "okay"; 543}; 544 545&usbotg { 546 pinctrl-names = "default"; 547 pinctrl-0 = <&pinctrl_usbotg>; 548 vbus-supply = <®_usb_otg_vbus>; 549 disable-over-current; 550 dr_mode = "otg"; 551 srp-disable; 552 hnp-disable; 553 adp-disable; 554 status = "okay"; 555}; 556 557&usbphynop1 { 558 clocks = <&clks IMX6QDL_CLK_USBPHY1>; 559 clock-names = "main_clk"; 560 vcc-supply = <®_usb_h1_vbus>; 561}; 562 563&usbphynop2 { 564 vcc-supply = <®_usb_h2_vbus>; 565}; 566 567&usdhc2 { 568 pinctrl-names = "default"; 569 pinctrl-0 = <&pinctrl_usdhc2>; 570 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 571 no-1-8-v; 572 keep-power-in-suspend; 573 enable-sdio-wakeup; 574 voltage-ranges = <3300 3300>; 575 vmmc-supply = <®_sw4>; 576 fsl,wp-controller; 577 status = "okay"; 578}; 579 580&usdhc4 { 581 pinctrl-names = "default"; 582 pinctrl-0 = <&pinctrl_usdhc4>; 583 bus-width = <8>; 584 non-removable; 585 no-1-8-v; 586 keep-power-in-suspend; 587 voltage-ranges = <3300 3300>; 588 vmmc-supply = <®_sw4>; 589 fsl,wp-controller; 590 status = "okay"; 591}; 592 593&wdog1 { 594 pinctrl-names = "default"; 595 pinctrl-0 = <&pinctrl_wdog1>; 596 fsl,ext-reset-output; 597 timeout-sec=<10>; 598 status = "okay"; 599}; 600 601&iomuxc { 602 pinctrl_enet: enetgrp { 603 fsl,pins = < 604 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 605 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 606 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 607 MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC INT */ 608 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 609 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 610 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 611 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 612 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 613 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 614 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 615 >; 616 }; 617 618 pinctrl_reset_gpio_led: reset-gpio-led-grp { 619 fsl,pins = < 620 MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 621 >; 622 }; 623 624 pinctrl_i2c1: i2c1grp { 625 fsl,pins = < 626 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 627 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 628 >; 629 }; 630 631 pinctrl_i2c2: i2c2grp { 632 fsl,pins = < 633 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810 634 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810 635 >; 636 }; 637 638 pinctrl_i2c3: i2c3grp { 639 fsl,pins = < 640 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 641 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 642 >; 643 }; 644 645 pinctrl_lcd_enable: lcdenablegrp { 646 fsl,pins = < 647 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* lcd enable */ 648 MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /* sel6_8 */ 649 >; 650 }; 651 652 pinctrl_lm75: lm75grp { 653 fsl,pins = < 654 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 655 >; 656 }; 657 658 pinctrl_proximity: proximitygrp { 659 fsl,pins = < 660 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 661 >; 662 }; 663 664 pinctrl_pwm1: pwm1grp { 665 fsl,pins = < 666 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0 667 >; 668 }; 669 670 pinctrl_pwm2: pwm2grp { 671 fsl,pins = < 672 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0 673 >; 674 }; 675 676 pinctrl_pwm3: pwm3grp { 677 fsl,pins = < 678 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0 679 >; 680 }; 681 682 pinctrl_pwm4: pwm4grp { 683 fsl,pins = < 684 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0 685 >; 686 }; 687 688 pinctrl_rtc: rtc-grp { 689 fsl,pins = < 690 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */ 691 >; 692 }; 693 694 pinctrl_ctouch: ctouch-grp { 695 fsl,pins = < 696 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */ 697 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */ 698 >; 699 }; 700 701 pinctrl_uart1: uart1grp { 702 fsl,pins = < 703 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 704 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 705 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0 706 >; 707 }; 708 709 pinctrl_uart2: uart2grp { 710 fsl,pins = < 711 MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 712 MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 713 MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 714 MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 715 >; 716 }; 717 718 pinctrl_usbh2_idle: usbh2-idle-grp { 719 fsl,pins = < 720 MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 721 MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018 722 >; 723 }; 724 725 pinctrl_usbh2_active: usbh2-active-grp { 726 fsl,pins = < 727 MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 728 MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018 729 >; 730 }; 731 732 pinctrl_usb3503: usb3503-grp { 733 fsl,pins = < 734 MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x00000018 735 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USB INT */ 736 MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */ 737 MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 /* USB Connect */ 738 >; 739 }; 740 741 pinctrl_usbotg: usbotggrp { 742 fsl,pins = < 743 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 744 >; 745 }; 746 747 pinctrl_usdhc2: usdhc2grp { 748 fsl,pins = < 749 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017069 750 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00010038 751 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069 752 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069 753 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069 754 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069 755 MX6QDL_PAD_GPIO_4__SD2_CD_B 0x0001b0b0 756 >; 757 }; 758 759 pinctrl_usdhc4: usdhc4grp { 760 fsl,pins = < 761 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x00017059 762 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x00010059 763 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059 764 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059 765 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059 766 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059 767 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059 768 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059 769 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059 770 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059 771 >; 772 }; 773 774 pinctrl_wdog1: wdoggrp { 775 fsl,pins = < 776 MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 777 >; 778 }; 779};