imx6q-dmo-edmqmx6.dts (9998B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Data Modul AG 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/gpio/gpio.h> 9#include "imx6q.dtsi" 10 11/ { 12 model = "Data Modul eDM-QMX6 Board"; 13 compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; 14 15 chosen { 16 stdout-path = &uart2; 17 }; 18 19 aliases { 20 gpio7 = &stmpe_gpio1; 21 gpio8 = &stmpe_gpio2; 22 stmpe-i2c0 = &stmpe1; 23 stmpe-i2c1 = &stmpe2; 24 }; 25 26 memory@10000000 { 27 device_type = "memory"; 28 reg = <0x10000000 0x80000000>; 29 }; 30 31 regulators { 32 compatible = "simple-bus"; 33 #address-cells = <1>; 34 #size-cells = <0>; 35 36 reg_3p3v: regulator@0 { 37 compatible = "regulator-fixed"; 38 reg = <0>; 39 regulator-name = "3P3V"; 40 regulator-min-microvolt = <3300000>; 41 regulator-max-microvolt = <3300000>; 42 regulator-always-on; 43 }; 44 45 reg_usb_otg_switch: regulator@1 { 46 compatible = "regulator-fixed"; 47 reg = <1>; 48 regulator-name = "usb_otg_switch"; 49 regulator-min-microvolt = <5000000>; 50 regulator-max-microvolt = <5000000>; 51 gpio = <&gpio7 12 0>; 52 regulator-boot-on; 53 regulator-always-on; 54 }; 55 56 reg_usb_host1: regulator@2 { 57 compatible = "regulator-fixed"; 58 reg = <2>; 59 regulator-name = "usb_host1_en"; 60 regulator-min-microvolt = <3300000>; 61 regulator-max-microvolt = <3300000>; 62 gpio = <&gpio3 31 0>; 63 enable-active-high; 64 }; 65 }; 66 67 gpio-leds { 68 compatible = "gpio-leds"; 69 70 led-blue { 71 label = "blue"; 72 gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>; 73 linux,default-trigger = "heartbeat"; 74 }; 75 76 led-green { 77 label = "green"; 78 gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>; 79 }; 80 81 led-pink { 82 label = "pink"; 83 gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>; 84 }; 85 86 led-red { 87 label = "red"; 88 gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>; 89 }; 90 }; 91}; 92 93&can1 { 94 pinctrl-names = "default"; 95 pinctrl-0 = <&pinctrl_can1>; 96 status = "okay"; 97}; 98 99&ecspi5 { 100 pinctrl-names = "default"; 101 pinctrl-0 = <&pinctrl_ecspi5>; 102 cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; 103 status = "okay"; 104 105 flash: flash@0 { 106 compatible = "m25p80", "jedec,spi-nor"; 107 spi-max-frequency = <40000000>; 108 reg = <0>; 109 }; 110}; 111 112&fec { 113 pinctrl-names = "default"; 114 pinctrl-0 = <&pinctrl_enet>; 115 phy-mode = "rgmii-id"; 116 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; 117 phy-supply = <&vgen2_1v2_eth>; 118 status = "okay"; 119}; 120 121&i2c1 { 122 clock-frequency = <100000>; 123 pinctrl-names = "default"; 124 pinctrl-0 = <&pinctrl_i2c1>; 125 status = "okay"; 126}; 127 128&i2c2 { 129 clock-frequency = <100000>; 130 pinctrl-names = "default"; 131 pinctrl-0 = <&pinctrl_i2c2 132 &pinctrl_stmpe1 133 &pinctrl_stmpe2 134 &pinctrl_pfuze>; 135 status = "okay"; 136 137 pmic: pfuze100@8 { 138 compatible = "fsl,pfuze100"; 139 reg = <0x08>; 140 interrupt-parent = <&gpio3>; 141 interrupts = <20 8>; 142 143 regulators { 144 sw1a_reg: sw1ab { 145 regulator-min-microvolt = <300000>; 146 regulator-max-microvolt = <1875000>; 147 regulator-boot-on; 148 regulator-always-on; 149 }; 150 151 sw1c_reg: sw1c { 152 regulator-min-microvolt = <300000>; 153 regulator-max-microvolt = <1875000>; 154 regulator-boot-on; 155 regulator-always-on; 156 }; 157 158 sw2_reg: sw2 { 159 regulator-min-microvolt = <800000>; 160 regulator-max-microvolt = <3300000>; 161 regulator-boot-on; 162 regulator-always-on; 163 }; 164 165 sw3a_reg: sw3a { 166 regulator-min-microvolt = <400000>; 167 regulator-max-microvolt = <1975000>; 168 regulator-boot-on; 169 regulator-always-on; 170 }; 171 172 sw3b_reg: sw3b { 173 regulator-min-microvolt = <400000>; 174 regulator-max-microvolt = <1975000>; 175 regulator-boot-on; 176 regulator-always-on; 177 }; 178 179 sw4_reg: sw4 { 180 regulator-min-microvolt = <400000>; 181 regulator-max-microvolt = <1975000>; 182 regulator-always-on; 183 }; 184 185 swbst_reg: swbst { 186 regulator-min-microvolt = <5000000>; 187 regulator-max-microvolt = <5150000>; 188 regulator-always-on; 189 }; 190 191 snvs_reg: vsnvs { 192 regulator-min-microvolt = <1000000>; 193 regulator-max-microvolt = <3000000>; 194 regulator-boot-on; 195 regulator-always-on; 196 }; 197 198 vref_reg: vrefddr { 199 regulator-boot-on; 200 regulator-always-on; 201 }; 202 203 vgen1_reg: vgen1 { 204 regulator-min-microvolt = <800000>; 205 regulator-max-microvolt = <1550000>; 206 }; 207 208 vgen2_1v2_eth: vgen2 { 209 regulator-min-microvolt = <800000>; 210 regulator-max-microvolt = <1550000>; 211 }; 212 213 vdd_high_in: vgen3 { 214 regulator-min-microvolt = <1800000>; 215 regulator-max-microvolt = <3300000>; 216 regulator-boot-on; 217 regulator-always-on; 218 }; 219 220 vgen4_reg: vgen4 { 221 regulator-min-microvolt = <1800000>; 222 regulator-max-microvolt = <3300000>; 223 regulator-always-on; 224 }; 225 226 vgen5_reg: vgen5 { 227 regulator-min-microvolt = <1800000>; 228 regulator-max-microvolt = <3300000>; 229 regulator-always-on; 230 }; 231 232 vgen6_reg: vgen6 { 233 regulator-min-microvolt = <1800000>; 234 regulator-max-microvolt = <3300000>; 235 regulator-always-on; 236 }; 237 }; 238 }; 239 240 stmpe1: stmpe1601@40 { 241 compatible = "st,stmpe1601"; 242 reg = <0x40>; 243 interrupts = <30 0>; 244 interrupt-parent = <&gpio3>; 245 vcc-supply = <&sw2_reg>; 246 vio-supply = <&sw2_reg>; 247 248 stmpe_gpio1: stmpe_gpio { 249 #gpio-cells = <2>; 250 compatible = "st,stmpe-gpio"; 251 }; 252 }; 253 254 stmpe2: stmpe1601@44 { 255 compatible = "st,stmpe1601"; 256 reg = <0x44>; 257 interrupts = <2 0>; 258 interrupt-parent = <&gpio5>; 259 vcc-supply = <&sw2_reg>; 260 vio-supply = <&sw2_reg>; 261 262 stmpe_gpio2: stmpe_gpio { 263 #gpio-cells = <2>; 264 compatible = "st,stmpe-gpio"; 265 }; 266 }; 267 268 temp1: ad7414@4c { 269 compatible = "ad,ad7414"; 270 reg = <0x4c>; 271 }; 272 273 temp2: ad7414@4d { 274 compatible = "ad,ad7414"; 275 reg = <0x4d>; 276 }; 277 278 rtc: m41t62@68 { 279 compatible = "st,m41t62"; 280 reg = <0x68>; 281 }; 282}; 283 284&i2c3 { 285 clock-frequency = <100000>; 286 pinctrl-names = "default"; 287 pinctrl-0 = <&pinctrl_i2c3>; 288 status = "okay"; 289}; 290 291&iomuxc { 292 pinctrl-names = "default"; 293 pinctrl-0 = <&pinctrl_hog>; 294 295 imx6q-dmo-edmqmx6 { 296 pinctrl_hog: hoggrp { 297 fsl,pins = < 298 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000 299 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000 300 >; 301 }; 302 303 pinctrl_can1: can1grp { 304 fsl,pins = < 305 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 306 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 307 >; 308 }; 309 310 pinctrl_ecspi5: ecspi5rp-1 { 311 fsl,pins = < 312 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 313 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 314 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 315 MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 316 >; 317 }; 318 319 pinctrl_enet: enetgrp { 320 fsl,pins = < 321 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 322 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 323 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 324 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 325 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 326 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 327 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 328 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 329 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 330 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 331 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 332 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 333 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 334 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 335 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 336 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 337 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 338 >; 339 }; 340 341 pinctrl_i2c1: i2c1grp { 342 fsl,pins = < 343 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 344 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 345 >; 346 }; 347 348 pinctrl_i2c2: i2c2grp { 349 fsl,pins = < 350 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 351 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 352 >; 353 }; 354 355 pinctrl_i2c3: i2c3grp { 356 fsl,pins = < 357 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 358 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 359 >; 360 }; 361 362 pinctrl_pcie: pciegrp { 363 fsl,pins = < 364 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1 365 >; 366 }; 367 368 pinctrl_pfuze: pfuze100grp1 { 369 fsl,pins = < 370 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 371 >; 372 }; 373 374 pinctrl_stmpe1: stmpe1grp { 375 fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; 376 }; 377 378 pinctrl_stmpe2: stmpe2grp { 379 fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>; 380 }; 381 382 pinctrl_uart1: uart1grp { 383 fsl,pins = < 384 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 385 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 386 >; 387 }; 388 389 pinctrl_uart2: uart2grp { 390 fsl,pins = < 391 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 392 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 393 >; 394 }; 395 396 pinctrl_usbotg: usbotggrp { 397 fsl,pins = < 398 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 399 >; 400 }; 401 402 pinctrl_usdhc3: usdhc3grp { 403 fsl,pins = < 404 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 405 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 406 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 407 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 408 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 409 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 410 >; 411 }; 412 413 pinctrl_usdhc4: usdhc4grp { 414 fsl,pins = < 415 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 416 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 417 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 418 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 419 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 420 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 421 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 422 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 423 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 424 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 425 >; 426 }; 427 }; 428}; 429 430&pcie { 431 pinctrl-names = "default"; 432 pinctrl-0 = <&pinctrl_pcie>; 433 reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; 434 status = "okay"; 435}; 436 437&sata { 438 status = "okay"; 439}; 440 441&uart1 { 442 pinctrl-names = "default"; 443 pinctrl-0 = <&pinctrl_uart1>; 444 status = "okay"; 445}; 446 447&uart2 { 448 pinctrl-names = "default"; 449 pinctrl-0 = <&pinctrl_uart2>; 450 status = "okay"; 451}; 452 453&usbh1 { 454 vbus-supply = <®_usb_host1>; 455 disable-over-current; 456 dr_mode = "host"; 457 status = "okay"; 458}; 459 460&usbotg { 461 pinctrl-names = "default"; 462 pinctrl-0 = <&pinctrl_usbotg>; 463 disable-over-current; 464 status = "okay"; 465}; 466 467&usdhc3 { 468 pinctrl-names = "default"; 469 pinctrl-0 = <&pinctrl_usdhc3>; 470 vmmc-supply = <®_3p3v>; 471 status = "okay"; 472}; 473 474&usdhc4 { 475 pinctrl-names = "default"; 476 pinctrl-0 = <&pinctrl_usdhc4>; 477 vmmc-supply = <®_3p3v>; 478 non-removable; 479 bus-width = <8>; 480 status = "okay"; 481};