cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

imx6qdl-emcon-avari.dtsi (2954B)

      1// SPDX-License-Identifier: (GPL-2.0 or MIT)
      2//
      3// Copyright (C) 2018 emtrion GmbH
      4//
      5
      6/ {
      7	aliases {
      8		boardid = &boardid;
      9		mmc0 = &usdhc3;
     10		mmc1 = &usdhc2;
     11		mmc2 = &usdhc1;
     12		mmc3 = &usdhc4;
     13	};
     14
     15	reg_wall_5p0: reg-wall5p0 {
     16		compatible = "regulator-fixed";
     17		regulator-name = "Main-Supply";
     18		regulator-min-microvolt = <5000000>;
     19		regulator-max-microvolt = <5000000>;
     20		regulator-always-on;
     21		regulator-boot-on;
     22	};
     23
     24	reg_base3p3: reg-base3p3 {
     25		compatible = "regulator-fixed";
     26		vin-supply = <&reg_wall_5p0>;
     27		regulator-name = "3V3-avari";
     28		regulator-min-microvolt = <3300000>;
     29		regulator-max-microvolt = <3300000>;
     30		regulator-always-on;
     31		regulator-boot-on;
     32	};
     33
     34	reg_base1p5: reg-base1p5 {
     35		compatible = "regulator-fixed";
     36		vin-supply = <&reg_base3p3>;
     37		regulator-name = "1V5-avari";
     38		regulator-min-microvolt = <1500000>;
     39		regulator-max-microvolt = <1500000>;
     40		regulator-always-on;
     41		regulator-boot-on;
     42	};
     43
     44	reg_usb_otg: reg-otgvbus {
     45		compatible = "regulator-fixed";
     46		vin-supply = <&reg_wall_5p0>;
     47		regulator-name = "OTG_VBUS";
     48		regulator-min-microvolt = <5000000>;
     49		regulator-max-microvolt = <5000000>;
     50		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
     51		regulator-always-on;
     52	};
     53
     54	clk_codec: clock-codec {
     55		compatible = "fixed-clock";
     56		#clock-cells = <0>;
     57		clock-frequency  = <12000000>;
     58	};
     59
     60	sound {
     61		compatible = "fsl,imx-audio-sgtl5000";
     62		model = "emCON-avari-sgtl5000";
     63		ssi-controller = <&ssi2>;
     64		audio-codec = <&sgtl5000>;
     65		audio-routing =
     66			"Headphone Jack", "HP_OUT";
     67		mux-int-port = <2>;
     68		mux-ext-port = <3>;
     69	};
     70};
     71
     72&audmux {
     73	pinctrl-names = "default";
     74	pinctrl-0 = <&pinctrl_audmux>;
     75	status = "okay";
     76};
     77
     78&can1 {
     79	status = "okay";
     80};
     81
     82&can2 {
     83	status = "okay";
     84};
     85
     86&ecspi2 {
     87	status = "okay";
     88};
     89
     90&hdmi {
     91	ddc-i2c-bus = <&i2c2>;
     92	status = "okay";
     93};
     94
     95&i2c2 {
     96	status = "okay";
     97};
     98
     99&i2c3 {
    100	clock-frequency = <100000>;
    101	pinctrl-names = "default";
    102	pinctrl-0 = <&pinctrl_i2c3>;
    103	status = "okay";
    104
    105	sgtl5000: audio-codec@a {
    106		compatible = "fsl,sgtl5000";
    107		reg = <0x0a>;
    108		#sound-dai-cells = <0>;
    109		clocks = <&clk_codec>;
    110		VDDA-supply = <&reg_base3p3>;
    111		VDDIO-supply = <&reg_base3p3>;
    112	};
    113
    114	captouch: touchscreen@38 {
    115		compatible = "edt,edt-ft5406";
    116		reg = <0x38>;
    117		pinctrl-names = "default";
    118		pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
    119		interrupt-parent = <&gpio6>;
    120		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
    121		wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
    122		wakeup-source;
    123	};
    124
    125	boardid: gpio@3a {
    126		compatible = "nxp,pca8574";
    127		reg = <0x3a>;
    128		gpio-controller;
    129		#gpio-cells = <2>;
    130	};
    131};
    132
    133&pcie {
    134	status = "okay";
    135};
    136
    137&rgb_encoder {
    138	status = "okay";
    139};
    140
    141&rgb_panel {
    142	compatible = "edt,etm0700g0bdh6";
    143	status = "okay";
    144};
    145
    146&ssi2 {
    147	status = "okay";
    148};
    149
    150&uart2 {
    151	status = "okay";
    152	uart-has-rtscts;
    153};
    154
    155&uart3 {
    156	status = "okay";
    157};
    158
    159&uart4 {
    160	status = "okay";
    161};
    162
    163&uart5 {
    164	status = "okay";
    165};
    166
    167&usbh1 {
    168	status = "okay";
    169};
    170
    171&usbotg {
    172	status = "okay";
    173};
    174
    175&usdhc1 {
    176	status = "okay";
    177};