imx6qdl-gw52xx.dtsi (16441B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 /* these are used by bootloader for disabling nodes */ 12 aliases { 13 led0 = &led0; 14 led1 = &led1; 15 led2 = &led2; 16 nand = &gpmi; 17 ssi0 = &ssi1; 18 usb0 = &usbh1; 19 usb1 = &usbotg; 20 }; 21 22 chosen { 23 bootargs = "console=ttymxc1,115200"; 24 }; 25 26 backlight { 27 compatible = "pwm-backlight"; 28 pwms = <&pwm4 0 5000000>; 29 brightness-levels = <0 4 8 16 32 64 128 255>; 30 default-brightness-level = <7>; 31 }; 32 33 gpio-keys { 34 compatible = "gpio-keys"; 35 36 user-pb { 37 label = "user_pb"; 38 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 39 linux,code = <BTN_0>; 40 }; 41 42 user-pb1x { 43 label = "user_pb1x"; 44 linux,code = <BTN_1>; 45 interrupt-parent = <&gsc>; 46 interrupts = <0>; 47 }; 48 49 key-erased { 50 label = "key-erased"; 51 linux,code = <BTN_2>; 52 interrupt-parent = <&gsc>; 53 interrupts = <1>; 54 }; 55 56 eeprom-wp { 57 label = "eeprom_wp"; 58 linux,code = <BTN_3>; 59 interrupt-parent = <&gsc>; 60 interrupts = <2>; 61 }; 62 63 tamper { 64 label = "tamper"; 65 linux,code = <BTN_4>; 66 interrupt-parent = <&gsc>; 67 interrupts = <5>; 68 }; 69 70 switch-hold { 71 label = "switch_hold"; 72 linux,code = <BTN_5>; 73 interrupt-parent = <&gsc>; 74 interrupts = <7>; 75 }; 76 }; 77 78 leds { 79 compatible = "gpio-leds"; 80 pinctrl-names = "default"; 81 pinctrl-0 = <&pinctrl_gpio_leds>; 82 83 led0: user1 { 84 label = "user1"; 85 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 86 default-state = "on"; 87 linux,default-trigger = "heartbeat"; 88 }; 89 90 led1: user2 { 91 label = "user2"; 92 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 93 default-state = "off"; 94 }; 95 96 led2: user3 { 97 label = "user3"; 98 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 99 default-state = "off"; 100 }; 101 }; 102 103 memory@10000000 { 104 device_type = "memory"; 105 reg = <0x10000000 0x20000000>; 106 }; 107 108 pps { 109 compatible = "pps-gpio"; 110 pinctrl-names = "default"; 111 pinctrl-0 = <&pinctrl_pps>; 112 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 113 status = "okay"; 114 }; 115 116 reg_1p0v: regulator-1p0v { 117 compatible = "regulator-fixed"; 118 regulator-name = "1P0V"; 119 regulator-min-microvolt = <1000000>; 120 regulator-max-microvolt = <1000000>; 121 regulator-always-on; 122 }; 123 124 reg_3p3v: regulator-3p3v { 125 compatible = "regulator-fixed"; 126 regulator-name = "3P3V"; 127 regulator-min-microvolt = <3300000>; 128 regulator-max-microvolt = <3300000>; 129 regulator-always-on; 130 }; 131 132 reg_5p0v: regulator-5p0v { 133 compatible = "regulator-fixed"; 134 regulator-name = "5P0V"; 135 regulator-min-microvolt = <5000000>; 136 regulator-max-microvolt = <5000000>; 137 regulator-always-on; 138 }; 139 140 reg_usb_otg_vbus: regulator-usb-otg-vbus { 141 compatible = "regulator-fixed"; 142 regulator-name = "usb_otg_vbus"; 143 regulator-min-microvolt = <5000000>; 144 regulator-max-microvolt = <5000000>; 145 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 146 enable-active-high; 147 }; 148 149 sound { 150 compatible = "fsl,imx6q-ventana-sgtl5000", 151 "fsl,imx-audio-sgtl5000"; 152 model = "sgtl5000-audio"; 153 ssi-controller = <&ssi1>; 154 audio-codec = <&codec>; 155 audio-routing = 156 "MIC_IN", "Mic Jack", 157 "Mic Jack", "Mic Bias", 158 "Headphone Jack", "HP_OUT"; 159 mux-int-port = <1>; 160 mux-ext-port = <4>; 161 }; 162}; 163 164&audmux { 165 pinctrl-names = "default"; 166 pinctrl-0 = <&pinctrl_audmux>; 167 status = "okay"; 168}; 169 170&can1 { 171 pinctrl-names = "default"; 172 pinctrl-0 = <&pinctrl_flexcan1>; 173 status = "okay"; 174}; 175 176&clks { 177 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 178 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 179 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 180 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 181}; 182 183&ecspi3 { 184 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 185 pinctrl-names = "default"; 186 pinctrl-0 = <&pinctrl_ecspi3>; 187 status = "okay"; 188}; 189 190&fec { 191 pinctrl-names = "default"; 192 pinctrl-0 = <&pinctrl_enet>; 193 phy-mode = "rgmii-id"; 194 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; 195 status = "okay"; 196}; 197 198&gpmi { 199 pinctrl-names = "default"; 200 pinctrl-0 = <&pinctrl_gpmi_nand>; 201 status = "okay"; 202}; 203 204&hdmi { 205 ddc-i2c-bus = <&i2c3>; 206 status = "okay"; 207}; 208 209&i2c1 { 210 clock-frequency = <100000>; 211 pinctrl-names = "default"; 212 pinctrl-0 = <&pinctrl_i2c1>; 213 status = "okay"; 214 215 gsc: gsc@20 { 216 compatible = "gw,gsc"; 217 reg = <0x20>; 218 interrupt-parent = <&gpio1>; 219 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 220 interrupt-controller; 221 #interrupt-cells = <1>; 222 #size-cells = <0>; 223 224 adc { 225 compatible = "gw,gsc-adc"; 226 #address-cells = <1>; 227 #size-cells = <0>; 228 229 channel@0 { 230 gw,mode = <0>; 231 reg = <0x00>; 232 label = "temp"; 233 }; 234 235 channel@2 { 236 gw,mode = <1>; 237 reg = <0x02>; 238 label = "vdd_vin"; 239 }; 240 241 channel@5 { 242 gw,mode = <1>; 243 reg = <0x05>; 244 label = "vdd_3p3"; 245 }; 246 247 channel@8 { 248 gw,mode = <1>; 249 reg = <0x08>; 250 label = "vdd_bat"; 251 }; 252 253 channel@b { 254 gw,mode = <1>; 255 reg = <0x0b>; 256 label = "vdd_5p0"; 257 }; 258 259 channel@e { 260 gw,mode = <1>; 261 reg = <0xe>; 262 label = "vdd_arm"; 263 }; 264 265 channel@11 { 266 gw,mode = <1>; 267 reg = <0x11>; 268 label = "vdd_soc"; 269 }; 270 271 channel@14 { 272 gw,mode = <1>; 273 reg = <0x14>; 274 label = "vdd_3p0"; 275 }; 276 277 channel@17 { 278 gw,mode = <1>; 279 reg = <0x17>; 280 label = "vdd_1p5"; 281 }; 282 283 channel@1d { 284 gw,mode = <1>; 285 reg = <0x1d>; 286 label = "vdd_1p8"; 287 }; 288 289 channel@20 { 290 gw,mode = <1>; 291 reg = <0x20>; 292 label = "vdd_1p0"; 293 }; 294 295 channel@23 { 296 gw,mode = <1>; 297 reg = <0x23>; 298 label = "vdd_2p5"; 299 }; 300 301 channel@29 { 302 gw,mode = <1>; 303 reg = <0x29>; 304 label = "vdd_an1"; 305 }; 306 }; 307 }; 308 309 gsc_gpio: gpio@23 { 310 compatible = "nxp,pca9555"; 311 reg = <0x23>; 312 gpio-controller; 313 #gpio-cells = <2>; 314 interrupt-parent = <&gsc>; 315 interrupts = <4>; 316 }; 317 318 eeprom1: eeprom@50 { 319 compatible = "atmel,24c02"; 320 reg = <0x50>; 321 pagesize = <16>; 322 }; 323 324 eeprom2: eeprom@51 { 325 compatible = "atmel,24c02"; 326 reg = <0x51>; 327 pagesize = <16>; 328 }; 329 330 eeprom3: eeprom@52 { 331 compatible = "atmel,24c02"; 332 reg = <0x52>; 333 pagesize = <16>; 334 }; 335 336 eeprom4: eeprom@53 { 337 compatible = "atmel,24c02"; 338 reg = <0x53>; 339 pagesize = <16>; 340 }; 341 342 rtc: ds1672@68 { 343 compatible = "dallas,ds1672"; 344 reg = <0x68>; 345 }; 346}; 347 348&i2c2 { 349 clock-frequency = <100000>; 350 pinctrl-names = "default"; 351 pinctrl-0 = <&pinctrl_i2c2>; 352 status = "okay"; 353 354 ltc3676: pmic@3c { 355 compatible = "lltc,ltc3676"; 356 reg = <0x3c>; 357 pinctrl-names = "default"; 358 pinctrl-0 = <&pinctrl_pmic>; 359 interrupt-parent = <&gpio1>; 360 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 361 362 regulators { 363 /* VDD_SOC (1+R1/R2 = 1.635) */ 364 reg_vdd_soc: sw1 { 365 regulator-name = "vddsoc"; 366 regulator-min-microvolt = <674400>; 367 regulator-max-microvolt = <1308000>; 368 lltc,fb-voltage-divider = <127000 200000>; 369 regulator-ramp-delay = <7000>; 370 regulator-boot-on; 371 regulator-always-on; 372 }; 373 374 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ 375 reg_1p8v: sw2 { 376 regulator-name = "vdd1p8"; 377 regulator-min-microvolt = <1033310>; 378 regulator-max-microvolt = <2004000>; 379 lltc,fb-voltage-divider = <301000 200000>; 380 regulator-ramp-delay = <7000>; 381 regulator-boot-on; 382 regulator-always-on; 383 }; 384 385 /* VDD_ARM (1+R1/R2 = 1.635) */ 386 reg_vdd_arm: sw3 { 387 regulator-name = "vddarm"; 388 regulator-min-microvolt = <674400>; 389 regulator-max-microvolt = <1308000>; 390 lltc,fb-voltage-divider = <127000 200000>; 391 regulator-ramp-delay = <7000>; 392 regulator-boot-on; 393 regulator-always-on; 394 }; 395 396 /* VDD_DDR (1+R1/R2 = 2.105) */ 397 reg_vdd_ddr: sw4 { 398 regulator-name = "vddddr"; 399 regulator-min-microvolt = <868310>; 400 regulator-max-microvolt = <1684000>; 401 lltc,fb-voltage-divider = <221000 200000>; 402 regulator-ramp-delay = <7000>; 403 regulator-boot-on; 404 regulator-always-on; 405 }; 406 407 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ 408 reg_2p5v: ldo2 { 409 regulator-name = "vdd2p5"; 410 regulator-min-microvolt = <2490375>; 411 regulator-max-microvolt = <2490375>; 412 lltc,fb-voltage-divider = <487000 200000>; 413 regulator-boot-on; 414 regulator-always-on; 415 }; 416 417 /* VDD_AUD_1P8: Audio codec */ 418 reg_aud_1p8v: ldo3 { 419 regulator-name = "vdd1p8a"; 420 regulator-min-microvolt = <1800000>; 421 regulator-max-microvolt = <1800000>; 422 regulator-boot-on; 423 }; 424 425 /* VDD_HIGH (1+R1/R2 = 4.17) */ 426 reg_3p0v: ldo4 { 427 regulator-name = "vdd3p0"; 428 regulator-min-microvolt = <3023250>; 429 regulator-max-microvolt = <3023250>; 430 lltc,fb-voltage-divider = <634000 200000>; 431 regulator-boot-on; 432 regulator-always-on; 433 }; 434 }; 435 }; 436}; 437 438&i2c3 { 439 clock-frequency = <100000>; 440 pinctrl-names = "default"; 441 pinctrl-0 = <&pinctrl_i2c3>; 442 status = "okay"; 443 444 codec: sgtl5000@a { 445 compatible = "fsl,sgtl5000"; 446 reg = <0x0a>; 447 clocks = <&clks IMX6QDL_CLK_CKO>; 448 VDDA-supply = <®_1p8v>; 449 VDDIO-supply = <®_3p3v>; 450 }; 451 452 touchscreen: egalax_ts@4 { 453 compatible = "eeti,egalax_ts"; 454 reg = <0x04>; 455 interrupt-parent = <&gpio7>; 456 interrupts = <12 2>; 457 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; 458 }; 459 460 accel@1e { 461 compatible = "nxp,fxos8700"; 462 reg = <0x1e>; 463 }; 464}; 465 466&ldb { 467 status = "okay"; 468 469 lvds-channel@0 { 470 fsl,data-mapping = "spwg"; 471 fsl,data-width = <18>; 472 status = "okay"; 473 474 display-timings { 475 native-mode = <&timing0>; 476 timing0: hsd100pxn1 { 477 clock-frequency = <65000000>; 478 hactive = <1024>; 479 vactive = <768>; 480 hback-porch = <220>; 481 hfront-porch = <40>; 482 vback-porch = <21>; 483 vfront-porch = <7>; 484 hsync-len = <60>; 485 vsync-len = <10>; 486 }; 487 }; 488 }; 489}; 490 491&pcie { 492 pinctrl-names = "default"; 493 pinctrl-0 = <&pinctrl_pcie>; 494 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; 495 status = "okay"; 496}; 497 498&pwm2 { 499 pinctrl-names = "default"; 500 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 501 status = "disabled"; 502}; 503 504&pwm3 { 505 pinctrl-names = "default"; 506 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 507 status = "disabled"; 508}; 509 510&pwm4 { 511 #pwm-cells = <2>; 512 pinctrl-names = "default"; 513 pinctrl-0 = <&pinctrl_pwm4>; 514 status = "okay"; 515}; 516 517&ssi1 { 518 status = "okay"; 519}; 520 521&uart1 { 522 pinctrl-names = "default"; 523 pinctrl-0 = <&pinctrl_uart1>; 524 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 525 status = "okay"; 526}; 527 528&uart2 { 529 pinctrl-names = "default"; 530 pinctrl-0 = <&pinctrl_uart2>; 531 status = "okay"; 532}; 533 534&uart5 { 535 pinctrl-names = "default"; 536 pinctrl-0 = <&pinctrl_uart5>; 537 status = "okay"; 538}; 539 540&usbotg { 541 vbus-supply = <®_usb_otg_vbus>; 542 pinctrl-names = "default"; 543 pinctrl-0 = <&pinctrl_usbotg>; 544 disable-over-current; 545 status = "okay"; 546}; 547 548&usbh1 { 549 status = "okay"; 550}; 551 552&usdhc3 { 553 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 554 pinctrl-0 = <&pinctrl_usdhc3>; 555 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 556 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 557 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 558 vmmc-supply = <®_3p3v>; 559 no-1-8-v; /* firmware will remove if board revision supports */ 560 status = "okay"; 561}; 562 563&wdog1 { 564 pinctrl-names = "default"; 565 pinctrl-0 = <&pinctrl_wdog>; 566 fsl,ext-reset-output; 567}; 568 569&iomuxc { 570 pinctrl_audmux: audmuxgrp { 571 fsl,pins = < 572 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 573 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 574 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 575 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 576 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ 577 >; 578 }; 579 580 pinctrl_ecspi3: escpi3grp { 581 fsl,pins = < 582 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 583 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 584 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 585 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 586 >; 587 }; 588 589 pinctrl_enet: enetgrp { 590 fsl,pins = < 591 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 592 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 593 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 594 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 595 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 596 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 597 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 598 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 599 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 600 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 601 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 602 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 603 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 604 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 605 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 606 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 607 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ 608 >; 609 }; 610 611 pinctrl_flexcan1: flexcan1grp { 612 fsl,pins = < 613 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 614 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 615 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ 616 >; 617 }; 618 619 pinctrl_gpio_leds: gpioledsgrp { 620 fsl,pins = < 621 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 622 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 623 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 624 >; 625 }; 626 627 pinctrl_gpmi_nand: gpminandgrp { 628 fsl,pins = < 629 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 630 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 631 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 632 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 633 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 634 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 635 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 636 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 637 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 638 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 639 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 640 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 641 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 642 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 643 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 644 >; 645 }; 646 647 pinctrl_i2c1: i2c1grp { 648 fsl,pins = < 649 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 650 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 651 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 652 >; 653 }; 654 655 pinctrl_i2c2: i2c2grp { 656 fsl,pins = < 657 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 658 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 659 >; 660 }; 661 662 pinctrl_i2c3: i2c3grp { 663 fsl,pins = < 664 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 665 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 666 >; 667 }; 668 669 pinctrl_pcie: pciegrp { 670 fsl,pins = < 671 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ 672 >; 673 }; 674 675 pinctrl_pmic: pmicgrp { 676 fsl,pins = < 677 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ 678 >; 679 }; 680 681 pinctrl_pps: ppsgrp { 682 fsl,pins = < 683 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 684 >; 685 }; 686 687 pinctrl_pwm2: pwm2grp { 688 fsl,pins = < 689 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 690 >; 691 }; 692 693 pinctrl_pwm3: pwm3grp { 694 fsl,pins = < 695 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 696 >; 697 }; 698 699 pinctrl_pwm4: pwm4grp { 700 fsl,pins = < 701 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 702 >; 703 }; 704 705 pinctrl_uart1: uart1grp { 706 fsl,pins = < 707 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 708 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 709 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ 710 >; 711 }; 712 713 pinctrl_uart2: uart2grp { 714 fsl,pins = < 715 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 716 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 717 >; 718 }; 719 720 pinctrl_uart5: uart5grp { 721 fsl,pins = < 722 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 723 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 724 >; 725 }; 726 727 pinctrl_usbotg: usbotggrp { 728 fsl,pins = < 729 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 730 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ 731 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059 732 >; 733 }; 734 735 pinctrl_usdhc3: usdhc3grp { 736 fsl,pins = < 737 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 738 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 739 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 740 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 741 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 742 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 743 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ 744 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 745 >; 746 }; 747 748 pinctrl_usdhc3_100mhz: usdhc3grp100mhz { 749 fsl,pins = < 750 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 751 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 752 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 753 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 754 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 755 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 756 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ 757 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 758 >; 759 }; 760 761 pinctrl_usdhc3_200mhz: usdhc3grp200mhz { 762 fsl,pins = < 763 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 764 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 765 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 766 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 767 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 768 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 769 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ 770 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 771 >; 772 }; 773 774 pinctrl_wdog: wdoggrp { 775 fsl,pins = < 776 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 777 >; 778 }; 779};