imx6qdl-gw53xx.dtsi (16160B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 /* these are used by bootloader for disabling nodes */ 12 aliases { 13 led0 = &led0; 14 led1 = &led1; 15 led2 = &led2; 16 nand = &gpmi; 17 ssi0 = &ssi1; 18 usb0 = &usbh1; 19 usb1 = &usbotg; 20 }; 21 22 chosen { 23 bootargs = "console=ttymxc1,115200"; 24 }; 25 26 backlight { 27 compatible = "pwm-backlight"; 28 pwms = <&pwm4 0 5000000>; 29 brightness-levels = <0 4 8 16 32 64 128 255>; 30 default-brightness-level = <7>; 31 }; 32 33 gpio-keys { 34 compatible = "gpio-keys"; 35 36 user-pb { 37 label = "user_pb"; 38 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 39 linux,code = <BTN_0>; 40 }; 41 42 user-pb1x { 43 label = "user_pb1x"; 44 linux,code = <BTN_1>; 45 interrupt-parent = <&gsc>; 46 interrupts = <0>; 47 }; 48 49 key-erased { 50 label = "key-erased"; 51 linux,code = <BTN_2>; 52 interrupt-parent = <&gsc>; 53 interrupts = <1>; 54 }; 55 56 eeprom-wp { 57 label = "eeprom_wp"; 58 linux,code = <BTN_3>; 59 interrupt-parent = <&gsc>; 60 interrupts = <2>; 61 }; 62 63 tamper { 64 label = "tamper"; 65 linux,code = <BTN_4>; 66 interrupt-parent = <&gsc>; 67 interrupts = <5>; 68 }; 69 70 switch-hold { 71 label = "switch_hold"; 72 linux,code = <BTN_5>; 73 interrupt-parent = <&gsc>; 74 interrupts = <7>; 75 }; 76 }; 77 78 leds { 79 compatible = "gpio-leds"; 80 pinctrl-names = "default"; 81 pinctrl-0 = <&pinctrl_gpio_leds>; 82 83 led0: user1 { 84 label = "user1"; 85 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 86 default-state = "on"; 87 linux,default-trigger = "heartbeat"; 88 }; 89 90 led1: user2 { 91 label = "user2"; 92 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 93 default-state = "off"; 94 }; 95 96 led2: user3 { 97 label = "user3"; 98 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 99 default-state = "off"; 100 }; 101 }; 102 103 memory@10000000 { 104 device_type = "memory"; 105 reg = <0x10000000 0x40000000>; 106 }; 107 108 pps { 109 compatible = "pps-gpio"; 110 pinctrl-names = "default"; 111 pinctrl-0 = <&pinctrl_pps>; 112 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 113 status = "okay"; 114 }; 115 116 reg_1p0v: regulator-1p0v { 117 compatible = "regulator-fixed"; 118 regulator-name = "1P0V"; 119 regulator-min-microvolt = <1000000>; 120 regulator-max-microvolt = <1000000>; 121 regulator-always-on; 122 }; 123 124 reg_3p3v: regulator-3p3v { 125 compatible = "regulator-fixed"; 126 regulator-name = "3P3V"; 127 regulator-min-microvolt = <3300000>; 128 regulator-max-microvolt = <3300000>; 129 regulator-always-on; 130 }; 131 132 reg_usb_h1_vbus: regulator-usb-h1-vbus { 133 compatible = "regulator-fixed"; 134 regulator-name = "usb_h1_vbus"; 135 regulator-min-microvolt = <5000000>; 136 regulator-max-microvolt = <5000000>; 137 regulator-always-on; 138 }; 139 140 reg_usb_otg_vbus: regulator-usb-otg-vbus { 141 compatible = "regulator-fixed"; 142 regulator-name = "usb_otg_vbus"; 143 regulator-min-microvolt = <5000000>; 144 regulator-max-microvolt = <5000000>; 145 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 146 enable-active-high; 147 }; 148 149 sound { 150 compatible = "fsl,imx6q-ventana-sgtl5000", 151 "fsl,imx-audio-sgtl5000"; 152 model = "sgtl5000-audio"; 153 ssi-controller = <&ssi1>; 154 audio-codec = <&codec>; 155 audio-routing = 156 "MIC_IN", "Mic Jack", 157 "Mic Jack", "Mic Bias", 158 "Headphone Jack", "HP_OUT"; 159 mux-int-port = <1>; 160 mux-ext-port = <4>; 161 }; 162}; 163 164&audmux { 165 pinctrl-names = "default"; 166 pinctrl-0 = <&pinctrl_audmux>; 167 status = "okay"; 168}; 169 170&can1 { 171 pinctrl-names = "default"; 172 pinctrl-0 = <&pinctrl_flexcan1>; 173 status = "okay"; 174}; 175 176&clks { 177 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 178 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 179 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 180 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 181}; 182 183&fec { 184 pinctrl-names = "default"; 185 pinctrl-0 = <&pinctrl_enet>; 186 phy-mode = "rgmii-id"; 187 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; 188 status = "okay"; 189}; 190 191&gpmi { 192 pinctrl-names = "default"; 193 pinctrl-0 = <&pinctrl_gpmi_nand>; 194 status = "okay"; 195}; 196 197&hdmi { 198 ddc-i2c-bus = <&i2c3>; 199 status = "okay"; 200}; 201 202&i2c1 { 203 clock-frequency = <100000>; 204 pinctrl-names = "default"; 205 pinctrl-0 = <&pinctrl_i2c1>; 206 status = "okay"; 207 208 gsc: gsc@20 { 209 compatible = "gw,gsc"; 210 reg = <0x20>; 211 interrupt-parent = <&gpio1>; 212 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 213 interrupt-controller; 214 #interrupt-cells = <1>; 215 #size-cells = <0>; 216 217 adc { 218 compatible = "gw,gsc-adc"; 219 #address-cells = <1>; 220 #size-cells = <0>; 221 222 channel@0 { 223 gw,mode = <0>; 224 reg = <0x00>; 225 label = "temp"; 226 }; 227 228 channel@2 { 229 gw,mode = <1>; 230 reg = <0x02>; 231 label = "vdd_vin"; 232 }; 233 234 channel@5 { 235 gw,mode = <1>; 236 reg = <0x05>; 237 label = "vdd_3p3"; 238 }; 239 240 channel@8 { 241 gw,mode = <1>; 242 reg = <0x08>; 243 label = "vdd_bat"; 244 }; 245 246 channel@b { 247 gw,mode = <1>; 248 reg = <0x0b>; 249 label = "vdd_5p0"; 250 }; 251 252 channel@e { 253 gw,mode = <1>; 254 reg = <0xe>; 255 label = "vdd_arm"; 256 }; 257 258 channel@11 { 259 gw,mode = <1>; 260 reg = <0x11>; 261 label = "vdd_soc"; 262 }; 263 264 channel@14 { 265 gw,mode = <1>; 266 reg = <0x14>; 267 label = "vdd_3p0"; 268 }; 269 270 channel@17 { 271 gw,mode = <1>; 272 reg = <0x17>; 273 label = "vdd_1p5"; 274 }; 275 276 channel@1d { 277 gw,mode = <1>; 278 reg = <0x1d>; 279 label = "vdd_1p8"; 280 }; 281 282 channel@20 { 283 gw,mode = <1>; 284 reg = <0x20>; 285 label = "vdd_1p0"; 286 }; 287 288 channel@23 { 289 gw,mode = <1>; 290 reg = <0x23>; 291 label = "vdd_2p5"; 292 }; 293 294 channel@26 { 295 gw,mode = <1>; 296 reg = <0x26>; 297 label = "vdd_gps"; 298 }; 299 300 channel@29 { 301 gw,mode = <1>; 302 reg = <0x29>; 303 label = "vdd_an1"; 304 }; 305 }; 306 }; 307 308 gsc_gpio: gpio@23 { 309 compatible = "nxp,pca9555"; 310 reg = <0x23>; 311 gpio-controller; 312 #gpio-cells = <2>; 313 interrupt-parent = <&gsc>; 314 interrupts = <4>; 315 }; 316 317 eeprom1: eeprom@50 { 318 compatible = "atmel,24c02"; 319 reg = <0x50>; 320 pagesize = <16>; 321 }; 322 323 eeprom2: eeprom@51 { 324 compatible = "atmel,24c02"; 325 reg = <0x51>; 326 pagesize = <16>; 327 }; 328 329 eeprom3: eeprom@52 { 330 compatible = "atmel,24c02"; 331 reg = <0x52>; 332 pagesize = <16>; 333 }; 334 335 eeprom4: eeprom@53 { 336 compatible = "atmel,24c02"; 337 reg = <0x53>; 338 pagesize = <16>; 339 }; 340 341 rtc: ds1672@68 { 342 compatible = "dallas,ds1672"; 343 reg = <0x68>; 344 }; 345}; 346 347&i2c2 { 348 clock-frequency = <100000>; 349 pinctrl-names = "default"; 350 pinctrl-0 = <&pinctrl_i2c2>; 351 status = "okay"; 352 353 ltc3676: pmic@3c { 354 compatible = "lltc,ltc3676"; 355 reg = <0x3c>; 356 interrupt-parent = <&gpio1>; 357 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 358 359 regulators { 360 /* VDD_SOC (1+R1/R2 = 1.635) */ 361 reg_vdd_soc: sw1 { 362 regulator-name = "vddsoc"; 363 regulator-min-microvolt = <674400>; 364 regulator-max-microvolt = <1308000>; 365 lltc,fb-voltage-divider = <127000 200000>; 366 regulator-ramp-delay = <7000>; 367 regulator-boot-on; 368 regulator-always-on; 369 }; 370 371 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ 372 reg_1p8v: sw2 { 373 regulator-name = "vdd1p8"; 374 regulator-min-microvolt = <1033310>; 375 regulator-max-microvolt = <2004000>; 376 lltc,fb-voltage-divider = <301000 200000>; 377 regulator-ramp-delay = <7000>; 378 regulator-boot-on; 379 regulator-always-on; 380 }; 381 382 /* VDD_ARM (1+R1/R2 = 1.635) */ 383 reg_vdd_arm: sw3 { 384 regulator-name = "vddarm"; 385 regulator-min-microvolt = <674400>; 386 regulator-max-microvolt = <1308000>; 387 lltc,fb-voltage-divider = <127000 200000>; 388 regulator-ramp-delay = <7000>; 389 regulator-boot-on; 390 regulator-always-on; 391 }; 392 393 /* VDD_DDR (1+R1/R2 = 2.105) */ 394 reg_vdd_ddr: sw4 { 395 regulator-name = "vddddr"; 396 regulator-min-microvolt = <868310>; 397 regulator-max-microvolt = <1684000>; 398 lltc,fb-voltage-divider = <221000 200000>; 399 regulator-ramp-delay = <7000>; 400 regulator-boot-on; 401 regulator-always-on; 402 }; 403 404 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ 405 reg_2p5v: ldo2 { 406 regulator-name = "vdd2p5"; 407 regulator-min-microvolt = <2490375>; 408 regulator-max-microvolt = <2490375>; 409 lltc,fb-voltage-divider = <487000 200000>; 410 regulator-boot-on; 411 regulator-always-on; 412 }; 413 414 /* VDD_AUD_1P8: Audio codec */ 415 reg_aud_1p8v: ldo3 { 416 regulator-name = "vdd1p8a"; 417 regulator-min-microvolt = <1800000>; 418 regulator-max-microvolt = <1800000>; 419 regulator-boot-on; 420 }; 421 422 /* VDD_HIGH (1+R1/R2 = 4.17) */ 423 reg_3p0v: ldo4 { 424 regulator-name = "vdd3p0"; 425 regulator-min-microvolt = <3023250>; 426 regulator-max-microvolt = <3023250>; 427 lltc,fb-voltage-divider = <634000 200000>; 428 regulator-boot-on; 429 regulator-always-on; 430 }; 431 }; 432 }; 433}; 434 435&i2c3 { 436 clock-frequency = <100000>; 437 pinctrl-names = "default"; 438 pinctrl-0 = <&pinctrl_i2c3>; 439 status = "okay"; 440 441 codec: sgtl5000@a { 442 compatible = "fsl,sgtl5000"; 443 reg = <0x0a>; 444 clocks = <&clks IMX6QDL_CLK_CKO>; 445 VDDA-supply = <®_1p8v>; 446 VDDIO-supply = <®_3p3v>; 447 }; 448 449 touchscreen: egalax_ts@4 { 450 compatible = "eeti,egalax_ts"; 451 reg = <0x04>; 452 interrupt-parent = <&gpio1>; 453 interrupts = <11 2>; 454 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; 455 }; 456 457 accel@1e { 458 compatible = "nxp,fxos8700"; 459 reg = <0x1e>; 460 }; 461}; 462 463&ldb { 464 status = "okay"; 465 466 lvds-channel@0 { 467 fsl,data-mapping = "spwg"; 468 fsl,data-width = <18>; 469 status = "okay"; 470 471 display-timings { 472 native-mode = <&timing0>; 473 timing0: hsd100pxn1 { 474 clock-frequency = <65000000>; 475 hactive = <1024>; 476 vactive = <768>; 477 hback-porch = <220>; 478 hfront-porch = <40>; 479 vback-porch = <21>; 480 vfront-porch = <7>; 481 hsync-len = <60>; 482 vsync-len = <10>; 483 }; 484 }; 485 }; 486}; 487 488&pcie { 489 pinctrl-names = "default"; 490 pinctrl-0 = <&pinctrl_pcie>; 491 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; 492 status = "okay"; 493}; 494 495&pwm2 { 496 pinctrl-names = "default"; 497 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 498 status = "disabled"; 499}; 500 501&pwm3 { 502 pinctrl-names = "default"; 503 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 504 status = "disabled"; 505}; 506 507&pwm4 { 508 #pwm-cells = <2>; 509 pinctrl-names = "default"; 510 pinctrl-0 = <&pinctrl_pwm4>; 511 status = "okay"; 512}; 513 514&ssi1 { 515 status = "okay"; 516}; 517 518&uart1 { 519 pinctrl-names = "default"; 520 pinctrl-0 = <&pinctrl_uart1>; 521 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 522 status = "okay"; 523}; 524 525&uart2 { 526 pinctrl-names = "default"; 527 pinctrl-0 = <&pinctrl_uart2>; 528 status = "okay"; 529}; 530 531&uart5 { 532 pinctrl-names = "default"; 533 pinctrl-0 = <&pinctrl_uart5>; 534 status = "okay"; 535}; 536 537&usbotg { 538 vbus-supply = <®_usb_otg_vbus>; 539 pinctrl-names = "default"; 540 pinctrl-0 = <&pinctrl_usbotg>; 541 disable-over-current; 542 status = "okay"; 543}; 544 545&usbh1 { 546 vbus-supply = <®_usb_h1_vbus>; 547 status = "okay"; 548}; 549 550&usdhc3 { 551 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 552 pinctrl-0 = <&pinctrl_usdhc3>; 553 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 554 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 555 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 556 vmmc-supply = <®_3p3v>; 557 no-1-8-v; /* firmware will remove if board revision supports */ 558 status = "okay"; 559}; 560 561&wdog1 { 562 pinctrl-names = "default"; 563 pinctrl-0 = <&pinctrl_wdog>; 564 fsl,ext-reset-output; 565}; 566 567&iomuxc { 568 pinctrl_audmux: audmuxgrp { 569 fsl,pins = < 570 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 571 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 572 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 573 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 574 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ 575 >; 576 }; 577 578 pinctrl_enet: enetgrp { 579 fsl,pins = < 580 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 581 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 582 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 583 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 584 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 585 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 586 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 587 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 588 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 589 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 590 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 591 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 592 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 593 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 594 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 595 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 596 >; 597 }; 598 599 pinctrl_flexcan1: flexcan1grp { 600 fsl,pins = < 601 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 602 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 603 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ 604 >; 605 }; 606 607 pinctrl_gpio_leds: gpioledsgrp { 608 fsl,pins = < 609 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 610 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 611 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 612 >; 613 }; 614 615 pinctrl_gpmi_nand: gpminandgrp { 616 fsl,pins = < 617 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 618 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 619 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 620 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 621 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 622 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 623 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 624 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 625 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 626 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 627 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 628 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 629 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 630 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 631 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 632 >; 633 }; 634 635 pinctrl_i2c1: i2c1grp { 636 fsl,pins = < 637 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 638 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 639 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 640 >; 641 }; 642 643 pinctrl_i2c2: i2c2grp { 644 fsl,pins = < 645 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 646 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 647 >; 648 }; 649 650 pinctrl_i2c3: i2c3grp { 651 fsl,pins = < 652 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 653 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 654 >; 655 }; 656 657 pinctrl_pcie: pciegrp { 658 fsl,pins = < 659 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ 660 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ 661 >; 662 }; 663 664 pinctrl_pmic: pmicgrp { 665 fsl,pins = < 666 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ 667 >; 668 }; 669 670 pinctrl_pps: ppsgrp { 671 fsl,pins = < 672 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 673 >; 674 }; 675 676 pinctrl_pwm2: pwm2grp { 677 fsl,pins = < 678 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 679 >; 680 }; 681 682 pinctrl_pwm3: pwm3grp { 683 fsl,pins = < 684 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 685 >; 686 }; 687 688 pinctrl_pwm4: pwm4grp { 689 fsl,pins = < 690 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 691 >; 692 }; 693 694 pinctrl_uart1: uart1grp { 695 fsl,pins = < 696 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 697 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 698 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ 699 >; 700 }; 701 702 pinctrl_uart2: uart2grp { 703 fsl,pins = < 704 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 705 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 706 >; 707 }; 708 709 pinctrl_uart5: uart5grp { 710 fsl,pins = < 711 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 712 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 713 >; 714 }; 715 716 pinctrl_usbotg: usbotggrp { 717 fsl,pins = < 718 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 719 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ 720 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ 721 >; 722 }; 723 724 pinctrl_usdhc3: usdhc3grp { 725 fsl,pins = < 726 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 727 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 728 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 729 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 730 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 731 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 732 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ 733 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 734 >; 735 }; 736 737 pinctrl_usdhc3_100mhz: usdhc3grp100mhz { 738 fsl,pins = < 739 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 740 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 741 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 742 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 743 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 744 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 745 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ 746 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 747 >; 748 }; 749 750 pinctrl_usdhc3_200mhz: usdhc3grp200mhz { 751 fsl,pins = < 752 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 753 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 754 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 755 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 756 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 757 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 758 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ 759 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 760 >; 761 }; 762 763 pinctrl_wdog: wdoggrp { 764 fsl,pins = < 765 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 766 >; 767 }; 768};