imx6qdl-gw5904.dtsi (17859B)
1/* 2 * Copyright 2017 Gateworks Corporation 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48#include <dt-bindings/gpio/gpio.h> 49#include <dt-bindings/input/linux-event-codes.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51 52/ { 53 /* these are used by bootloader for disabling nodes */ 54 aliases { 55 led0 = &led0; 56 led1 = &led1; 57 led2 = &led2; 58 usb0 = &usbh1; 59 usb1 = &usbotg; 60 }; 61 62 chosen { 63 stdout-path = &uart2; 64 }; 65 66 backlight { 67 compatible = "pwm-backlight"; 68 pwms = <&pwm4 0 5000000>; 69 brightness-levels = <0 4 8 16 32 64 128 255>; 70 default-brightness-level = <7>; 71 }; 72 73 gpio-keys { 74 compatible = "gpio-keys"; 75 76 user-pb { 77 label = "user_pb"; 78 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 79 linux,code = <BTN_0>; 80 }; 81 82 user-pb1x { 83 label = "user_pb1x"; 84 linux,code = <BTN_1>; 85 interrupt-parent = <&gsc>; 86 interrupts = <0>; 87 }; 88 89 key-erased { 90 label = "key-erased"; 91 linux,code = <BTN_2>; 92 interrupt-parent = <&gsc>; 93 interrupts = <1>; 94 }; 95 96 eeprom-wp { 97 label = "eeprom_wp"; 98 linux,code = <BTN_3>; 99 interrupt-parent = <&gsc>; 100 interrupts = <2>; 101 }; 102 103 tamper { 104 label = "tamper"; 105 linux,code = <BTN_4>; 106 interrupt-parent = <&gsc>; 107 interrupts = <5>; 108 }; 109 110 switch-hold { 111 label = "switch_hold"; 112 linux,code = <BTN_5>; 113 interrupt-parent = <&gsc>; 114 interrupts = <7>; 115 }; 116 }; 117 118 leds { 119 compatible = "gpio-leds"; 120 pinctrl-names = "default"; 121 pinctrl-0 = <&pinctrl_gpio_leds>; 122 123 led0: user1 { 124 label = "user1"; 125 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 126 default-state = "on"; 127 linux,default-trigger = "heartbeat"; 128 }; 129 130 led1: user2 { 131 label = "user2"; 132 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 133 default-state = "off"; 134 }; 135 136 led2: user3 { 137 label = "user3"; 138 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 139 default-state = "off"; 140 }; 141 }; 142 143 memory@10000000 { 144 device_type = "memory"; 145 reg = <0x10000000 0x40000000>; 146 }; 147 148 pps { 149 compatible = "pps-gpio"; 150 pinctrl-names = "default"; 151 pinctrl-0 = <&pinctrl_pps>; 152 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 153 }; 154 155 reg_1p0v: regulator-1p0v { 156 compatible = "regulator-fixed"; 157 regulator-name = "1P0V"; 158 regulator-min-microvolt = <1000000>; 159 regulator-max-microvolt = <1000000>; 160 regulator-always-on; 161 }; 162 163 reg_3p3v: regulator-3p3v { 164 compatible = "regulator-fixed"; 165 regulator-name = "3P3V"; 166 regulator-min-microvolt = <3300000>; 167 regulator-max-microvolt = <3300000>; 168 regulator-always-on; 169 }; 170 171 reg_usb_h1_vbus: regulator-usb-h1-vbus { 172 compatible = "regulator-fixed"; 173 regulator-name = "usb_h1_vbus"; 174 regulator-min-microvolt = <5000000>; 175 regulator-max-microvolt = <5000000>; 176 regulator-always-on; 177 }; 178 179 reg_usb_otg_vbus: regulator-usb-otg-vbus { 180 compatible = "regulator-fixed"; 181 regulator-name = "usb_otg_vbus"; 182 regulator-min-microvolt = <5000000>; 183 regulator-max-microvolt = <5000000>; 184 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 185 enable-active-high; 186 }; 187}; 188 189&clks { 190 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 191 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 192 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 193 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 194}; 195 196&fec { 197 pinctrl-names = "default"; 198 pinctrl-0 = <&pinctrl_enet>; 199 phy-mode = "rgmii-id"; 200 status = "okay"; 201 202 fixed-link { 203 speed = <1000>; 204 full-duplex; 205 }; 206 207 mdio { 208 #address-cells = <1>; 209 #size-cells = <0>; 210 211 switch@0 { 212 compatible = "marvell,mv88e6085"; 213 reg = <0>; 214 215 ports { 216 #address-cells = <1>; 217 #size-cells = <0>; 218 219 port@0 { 220 reg = <0>; 221 label = "lan4"; 222 }; 223 224 port@1 { 225 reg = <1>; 226 label = "lan3"; 227 }; 228 229 port@2 { 230 reg = <2>; 231 label = "lan2"; 232 }; 233 234 port@3 { 235 reg = <3>; 236 label = "lan1"; 237 }; 238 239 port@5 { 240 reg = <5>; 241 label = "cpu"; 242 ethernet = <&fec>; 243 }; 244 }; 245 }; 246 }; 247}; 248 249&i2c1 { 250 clock-frequency = <100000>; 251 pinctrl-names = "default"; 252 pinctrl-0 = <&pinctrl_i2c1>; 253 status = "okay"; 254 255 gsc: gsc@20 { 256 compatible = "gw,gsc"; 257 reg = <0x20>; 258 interrupt-parent = <&gpio1>; 259 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 260 interrupt-controller; 261 #interrupt-cells = <1>; 262 #size-cells = <0>; 263 264 adc { 265 compatible = "gw,gsc-adc"; 266 #address-cells = <1>; 267 #size-cells = <0>; 268 269 channel@0 { 270 gw,mode = <0>; 271 reg = <0x00>; 272 label = "temp"; 273 }; 274 275 channel@2 { 276 gw,mode = <1>; 277 reg = <0x02>; 278 label = "vdd_vin"; 279 }; 280 281 channel@5 { 282 gw,mode = <1>; 283 reg = <0x05>; 284 label = "vdd_3p3"; 285 }; 286 287 channel@8 { 288 gw,mode = <1>; 289 reg = <0x08>; 290 label = "vdd_bat"; 291 }; 292 293 channel@b { 294 gw,mode = <1>; 295 reg = <0x0b>; 296 label = "vdd_5p0"; 297 }; 298 299 channel@e { 300 gw,mode = <1>; 301 reg = <0xe>; 302 label = "vdd_arm"; 303 }; 304 305 channel@11 { 306 gw,mode = <1>; 307 reg = <0x11>; 308 label = "vdd_soc"; 309 }; 310 311 channel@14 { 312 gw,mode = <1>; 313 reg = <0x14>; 314 label = "vdd_3p0"; 315 }; 316 317 channel@17 { 318 gw,mode = <1>; 319 reg = <0x17>; 320 label = "vdd_1p5"; 321 }; 322 323 channel@1d { 324 gw,mode = <1>; 325 reg = <0x1d>; 326 label = "vdd_1p8"; 327 }; 328 329 channel@20 { 330 gw,mode = <1>; 331 reg = <0x20>; 332 label = "vdd_an1"; 333 }; 334 335 channel@23 { 336 gw,mode = <1>; 337 reg = <0x23>; 338 label = "vdd_2p5"; 339 }; 340 }; 341 }; 342 343 gsc_gpio: gpio@23 { 344 compatible = "nxp,pca9555"; 345 reg = <0x23>; 346 gpio-controller; 347 #gpio-cells = <2>; 348 interrupt-parent = <&gsc>; 349 interrupts = <4>; 350 }; 351 352 eeprom1: eeprom@50 { 353 compatible = "atmel,24c02"; 354 reg = <0x50>; 355 pagesize = <16>; 356 }; 357 358 eeprom2: eeprom@51 { 359 compatible = "atmel,24c02"; 360 reg = <0x51>; 361 pagesize = <16>; 362 }; 363 364 eeprom3: eeprom@52 { 365 compatible = "atmel,24c02"; 366 reg = <0x52>; 367 pagesize = <16>; 368 }; 369 370 eeprom4: eeprom@53 { 371 compatible = "atmel,24c02"; 372 reg = <0x53>; 373 pagesize = <16>; 374 }; 375 376 dts1672: rtc@68 { 377 compatible = "dallas,ds1672"; 378 reg = <0x68>; 379 }; 380}; 381 382&i2c2 { 383 clock-frequency = <100000>; 384 pinctrl-names = "default"; 385 pinctrl-0 = <&pinctrl_i2c2>; 386 status = "okay"; 387 388 magn@1c { 389 compatible = "st,lsm9ds1-magn"; 390 reg = <0x1c>; 391 pinctrl-names = "default"; 392 pinctrl-0 = <&pinctrl_mag>; 393 interrupt-parent = <&gpio5>; 394 interrupts = <17 IRQ_TYPE_EDGE_RISING>; 395 }; 396 397 ltc3676: pmic@3c { 398 compatible = "lltc,ltc3676"; 399 reg = <0x3c>; 400 interrupt-parent = <&gpio1>; 401 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 402 403 regulators { 404 /* VDD_SOC (1+R1/R2 = 1.635) */ 405 reg_vdd_soc: sw1 { 406 regulator-name = "vddsoc"; 407 regulator-min-microvolt = <674400>; 408 regulator-max-microvolt = <1308000>; 409 lltc,fb-voltage-divider = <127000 200000>; 410 regulator-ramp-delay = <7000>; 411 regulator-boot-on; 412 regulator-always-on; 413 }; 414 415 /* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */ 416 reg_1p8v: sw2 { 417 regulator-name = "vdd1p8"; 418 regulator-min-microvolt = <1033310>; 419 regulator-max-microvolt = <2004000>; 420 lltc,fb-voltage-divider = <301000 200000>; 421 regulator-ramp-delay = <7000>; 422 regulator-boot-on; 423 regulator-always-on; 424 }; 425 426 /* VDD_ARM (1+R1/R2 = 1.635) */ 427 reg_vdd_arm: sw3 { 428 regulator-name = "vddarm"; 429 regulator-min-microvolt = <674400>; 430 regulator-max-microvolt = <1308000>; 431 lltc,fb-voltage-divider = <127000 200000>; 432 regulator-ramp-delay = <7000>; 433 regulator-boot-on; 434 regulator-always-on; 435 }; 436 437 /* VDD_DDR (1+R1/R2 = 2.105) */ 438 reg_vdd_ddr: sw4 { 439 regulator-name = "vddddr"; 440 regulator-min-microvolt = <868310>; 441 regulator-max-microvolt = <1684000>; 442 lltc,fb-voltage-divider = <221000 200000>; 443 regulator-ramp-delay = <7000>; 444 regulator-boot-on; 445 regulator-always-on; 446 }; 447 448 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ 449 reg_2p5v: ldo2 { 450 regulator-name = "vdd2p5"; 451 regulator-min-microvolt = <2490375>; 452 regulator-max-microvolt = <2490375>; 453 lltc,fb-voltage-divider = <487000 200000>; 454 regulator-boot-on; 455 regulator-always-on; 456 }; 457 458 /* VDD_HIGH (1+R1/R2 = 4.17) */ 459 reg_3p0v: ldo4 { 460 regulator-name = "vdd3p0"; 461 regulator-min-microvolt = <3023250>; 462 regulator-max-microvolt = <3023250>; 463 lltc,fb-voltage-divider = <634000 200000>; 464 regulator-boot-on; 465 regulator-always-on; 466 }; 467 }; 468 }; 469 470 crypto@60 { 471 compatible = "atmel,atecc508a"; 472 reg = <0x60>; 473 }; 474 475 imu@6a { 476 compatible = "st,lsm9ds1-imu"; 477 reg = <0x6a>; 478 st,drdy-int-pin = <1>; 479 pinctrl-names = "default"; 480 pinctrl-0 = <&pinctrl_imu>; 481 interrupt-parent = <&gpio4>; 482 interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; 483 }; 484}; 485 486&i2c3 { 487 clock-frequency = <100000>; 488 pinctrl-names = "default"; 489 pinctrl-0 = <&pinctrl_i2c3>; 490 status = "okay"; 491 492 egalax_ts: touchscreen@4 { 493 compatible = "eeti,egalax_ts"; 494 reg = <0x04>; 495 interrupt-parent = <&gpio1>; 496 interrupts = <11 IRQ_TYPE_EDGE_FALLING>; 497 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; 498 }; 499}; 500 501&ldb { 502 status = "okay"; 503 504 lvds-channel@0 { 505 fsl,data-mapping = "spwg"; 506 fsl,data-width = <18>; 507 status = "okay"; 508 509 display-timings { 510 native-mode = <&timing0>; 511 timing0: hsd100pxn1 { 512 clock-frequency = <65000000>; 513 hactive = <1024>; 514 vactive = <768>; 515 hback-porch = <220>; 516 hfront-porch = <40>; 517 vback-porch = <21>; 518 vfront-porch = <7>; 519 hsync-len = <60>; 520 vsync-len = <10>; 521 }; 522 }; 523 }; 524}; 525 526&pcie { 527 pinctrl-names = "default"; 528 pinctrl-0 = <&pinctrl_pcie>; 529 reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; 530 status = "okay"; 531}; 532 533&pwm2 { 534 pinctrl-names = "default"; 535 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 536 status = "disabled"; 537}; 538 539&pwm3 { 540 pinctrl-names = "default"; 541 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 542 status = "disabled"; 543}; 544 545&pwm4 { 546 #pwm-cells = <2>; 547 pinctrl-names = "default"; 548 pinctrl-0 = <&pinctrl_pwm4>; 549 status = "okay"; 550}; 551 552&uart1 { 553 pinctrl-names = "default"; 554 pinctrl-0 = <&pinctrl_uart1>; 555 status = "okay"; 556}; 557 558&uart2 { 559 pinctrl-names = "default"; 560 pinctrl-0 = <&pinctrl_uart2>; 561 status = "okay"; 562}; 563 564&uart3 { 565 pinctrl-names = "default"; 566 pinctrl-0 = <&pinctrl_uart3>; 567 uart-has-rtscts; 568 status = "okay"; 569}; 570 571&uart4 { 572 pinctrl-names = "default"; 573 pinctrl-0 = <&pinctrl_uart4>; 574 uart-has-rtscts; 575 status = "okay"; 576}; 577 578&uart5 { 579 pinctrl-names = "default"; 580 pinctrl-0 = <&pinctrl_uart5>; 581 status = "okay"; 582}; 583 584&usbotg { 585 vbus-supply = <®_usb_otg_vbus>; 586 pinctrl-names = "default"; 587 pinctrl-0 = <&pinctrl_usbotg>; 588 disable-over-current; 589 status = "okay"; 590}; 591 592&usbh1 { 593 vbus-supply = <®_usb_h1_vbus>; 594 status = "okay"; 595}; 596 597&usdhc3 { 598 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 599 pinctrl-0 = <&pinctrl_usdhc3>; 600 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 601 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 602 non-removable; 603 vmmc-supply = <®_3p3v>; 604 keep-power-in-suspend; 605 status = "okay"; 606}; 607 608&wdog1 { 609 pinctrl-names = "default"; 610 pinctrl-0 = <&pinctrl_wdog>; 611 fsl,ext-reset-output; 612}; 613 614&iomuxc { 615 pinctrl_enet: enetgrp { 616 fsl,pins = < 617 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 618 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 619 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 620 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 621 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 622 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 623 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 624 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 625 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 626 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 627 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 628 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 629 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 630 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 631 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 632 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 633 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ 634 >; 635 }; 636 637 pinctrl_gpio_leds: gpioledsgrp { 638 fsl,pins = < 639 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 640 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 641 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 642 >; 643 }; 644 645 pinctrl_i2c1: i2c1grp { 646 fsl,pins = < 647 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 648 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 649 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ 650 >; 651 }; 652 653 pinctrl_i2c2: i2c2grp { 654 fsl,pins = < 655 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 656 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 657 >; 658 }; 659 660 pinctrl_i2c3: i2c3grp { 661 fsl,pins = < 662 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 663 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 664 >; 665 }; 666 667 pinctrl_imu: imugrp { 668 fsl,pins = < 669 MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 670 >; 671 }; 672 673 pinctrl_mag: maggrp { 674 fsl,pins = < 675 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 676 >; 677 }; 678 679 pinctrl_pcie: pciegrp { 680 fsl,pins = < 681 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ 682 >; 683 }; 684 685 pinctrl_pmic: pmicgrp { 686 fsl,pins = < 687 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */ 688 >; 689 }; 690 691 pinctrl_pps: ppsgrp { 692 fsl,pins = < 693 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 694 >; 695 }; 696 697 pinctrl_pwm2: pwm2grp { 698 fsl,pins = < 699 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 700 >; 701 }; 702 703 pinctrl_pwm3: pwm3grp { 704 fsl,pins = < 705 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 706 >; 707 }; 708 709 pinctrl_pwm4: pwm4grp { 710 fsl,pins = < 711 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 712 >; 713 }; 714 715 pinctrl_uart1: uart1grp { 716 fsl,pins = < 717 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 718 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 719 >; 720 }; 721 722 pinctrl_uart2: uart2grp { 723 fsl,pins = < 724 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 725 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 726 >; 727 }; 728 729 pinctrl_uart3: uart3grp { 730 fsl,pins = < 731 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 732 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 733 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 734 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 735 >; 736 }; 737 738 pinctrl_uart4: uart4grp { 739 fsl,pins = < 740 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 741 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 742 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 743 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 744 >; 745 }; 746 747 pinctrl_uart5: uart5grp { 748 fsl,pins = < 749 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 750 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 751 >; 752 }; 753 754 pinctrl_usbotg: usbotggrp { 755 fsl,pins = < 756 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 757 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ 758 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ 759 >; 760 }; 761 762 pinctrl_usdhc3: usdhc3grp { 763 fsl,pins = < 764 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 765 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 766 MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059 767 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 768 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 769 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 770 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 771 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 772 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 773 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 774 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 775 >; 776 }; 777 778 pinctrl_usdhc3_100mhz: usdhc3grp100mhz { 779 fsl,pins = < 780 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 781 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 782 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9 783 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 784 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 785 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 786 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 787 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 788 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 789 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 790 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 791 >; 792 }; 793 794 pinctrl_usdhc3_200mhz: usdhc3grp200mhz { 795 fsl,pins = < 796 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 797 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 798 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9 799 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 800 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 801 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 802 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 803 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 804 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 805 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 806 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 807 >; 808 }; 809 810 pinctrl_wdog: wdoggrp { 811 fsl,pins = < 812 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 813 >; 814 }; 815};