imx6qdl-phytec-mira.dtsi (8664B)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2018 PHYTEC Messtechnik GmbH 4 * Author: Christian Hemp <c.hemp@phytec.de> 5 */ 6 7 8/ { 9 aliases { 10 rtc0 = &i2c_rtc; 11 }; 12 13 backlight: backlight { 14 compatible = "pwm-backlight"; 15 brightness-levels = <0 4 8 16 32 64 128 255>; 16 default-brightness-level = <7>; 17 power-supply = <®_backlight>; 18 pwms = <&pwm1 0 5000000>; 19 status = "okay"; 20 }; 21 22 gpio_leds: leds { 23 compatible = "gpio-leds"; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&pinctrl_gpioleds>; 26 status = "disabled"; 27 28 red { 29 label = "phyboard-mira:red"; 30 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; 31 }; 32 33 green { 34 label = "phyboard-mira:green"; 35 gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; 36 }; 37 38 blue { 39 label = "phyboard-mira:blue"; 40 gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; 41 linux,default-trigger = "mmc0"; 42 }; 43 }; 44 45 reg_backlight: regulator-backlight { 46 compatible = "regulator-fixed"; 47 regulator-name = "backlight_3v3"; 48 regulator-min-microvolt = <3300000>; 49 regulator-max-microvolt = <3300000>; 50 regulator-always-on; 51 }; 52 53 reg_en_switch: regulator-en-switch { 54 compatible = "regulator-fixed"; 55 pinctrl-names = "default"; 56 pinctrl-0 = <&pinctrl_en_switch>; 57 regulator-name = "Enable Switch"; 58 regulator-min-microvolt = <3300000>; 59 regulator-max-microvolt = <3300000>; 60 enable-active-high; 61 gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>; 62 regulator-always-on; 63 }; 64 65 reg_flexcan1: regulator-flexcan1 { 66 compatible = "regulator-fixed"; 67 pinctrl-names = "default"; 68 pinctrl-0 = <&pinctrl_flexcan1_en>; 69 regulator-name = "flexcan1-reg"; 70 regulator-min-microvolt = <1500000>; 71 regulator-max-microvolt = <1500000>; 72 gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; 73 enable-active-high; 74 }; 75 76 reg_panel: regulator-panel { 77 compatible = "regulator-fixed"; 78 regulator-name = "panel-power-supply"; 79 regulator-min-microvolt = <12000000>; 80 regulator-max-microvolt = <12000000>; 81 regulator-always-on; 82 }; 83 84 reg_pcie: regulator-pcie { 85 compatible = "regulator-fixed"; 86 pinctrl-names = "default"; 87 pinctrl-0 = <&pinctrl_pcie_reg>; 88 regulator-name = "mPCIe_1V5"; 89 regulator-min-microvolt = <1500000>; 90 regulator-max-microvolt = <1500000>; 91 gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>; 92 enable-active-high; 93 }; 94 95 reg_usb_h1_vbus: usb-h1-vbus { 96 compatible = "regulator-fixed"; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pinctrl_usbh1_vbus>; 99 regulator-name = "usb_h1_vbus"; 100 regulator-min-microvolt = <5000000>; 101 regulator-max-microvolt = <5000000>; 102 gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; 103 enable-active-high; 104 }; 105 106 reg_usbotg_vbus: usbotg-vbus { 107 compatible = "regulator-fixed"; 108 pinctrl-names = "default"; 109 pinctrl-0 = <&pinctrl_usbotg_vbus>; 110 regulator-name = "usb_otg_vbus"; 111 regulator-min-microvolt = <5000000>; 112 regulator-max-microvolt = <5000000>; 113 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; 114 enable-active-high; 115 }; 116 117 panel { 118 compatible = "auo,g104sn02"; 119 pinctrl-names = "default"; 120 pinctrl-0 = <&pinctrl_panel_en>; 121 power-supply = <®_panel>; 122 enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; 123 backlight = <&backlight>; 124 125 port { 126 panel_in: endpoint { 127 remote-endpoint = <&lvds0_out>; 128 }; 129 }; 130 }; 131}; 132 133&can1 { 134 pinctrl-names = "default"; 135 pinctrl-0 = <&pinctrl_flexcan1>; 136 xceiver-supply = <®_flexcan1>; 137 status = "disabled"; 138}; 139 140&hdmi { 141 pinctrl-names = "default"; 142 pinctrl-0 = <&pinctrl_hdmicec>; 143 ddc-i2c-bus = <&i2c2>; 144 status = "disabled"; 145}; 146 147&i2c1 { 148 pinctrl-names = "default", "gpio"; 149 pinctrl-0 = <&pinctrl_i2c1>; 150 pinctrl-1 = <&pinctrl_i2c1_gpio>; 151 scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 152 sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 153 clock-frequency = <400000>; 154 status = "disabled"; 155 156 stmpe: touchctrl@44 { 157 compatible = "st,stmpe811"; 158 pinctrl-names = "default"; 159 pinctrl-0 = <&pinctrl_stmpe>; 160 reg = <0x44>; 161 interrupt-parent = <&gpio7>; 162 interrupts = <12 IRQ_TYPE_NONE>; 163 status = "disabled"; 164 165 stmpe_touchscreen { 166 compatible = "st,stmpe-ts"; 167 st,sample-time = <4>; 168 st,mod-12b = <1>; 169 st,ref-sel = <0>; 170 st,adc-freq = <1>; 171 st,ave-ctrl = <1>; 172 st,touch-det-delay = <2>; 173 st,settling = <2>; 174 st,fraction-z = <7>; 175 st,i-drive = <1>; 176 }; 177 }; 178 179 i2c_rtc: rtc@68 { 180 compatible = "microcrystal,rv4162"; 181 pinctrl-names = "default"; 182 pinctrl-0 = <&pinctrl_rtc_int>; 183 reg = <0x68>; 184 interrupt-parent = <&gpio7>; 185 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; 186 status = "disabled"; 187 }; 188}; 189 190&i2c2 { 191 pinctrl-names = "default", "gpio"; 192 pinctrl-0 = <&pinctrl_i2c2>; 193 pinctrl-1 = <&pinctrl_i2c2_gpio>; 194 scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 195 sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 196 clock-frequency = <100000>; 197 status = "disabled"; 198}; 199 200&ldb { 201 status = "okay"; 202 203 lvds-channel@0 { 204 fsl,data-mapping = "spwg"; 205 fsl,data-width = <24>; 206 status = "disabled"; 207 208 port@4 { 209 reg = <4>; 210 211 lvds0_out: endpoint { 212 remote-endpoint = <&panel_in>; 213 }; 214 }; 215 }; 216}; 217 218&pcie { 219 pinctrl-names = "default"; 220 pinctrl-0 = <&pinctrl_pcie>; 221 reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; 222 vpcie-supply = <®_pcie>; 223 status = "disabled"; 224}; 225 226&pwm1 { 227 #pwm-cells = <2>; 228 pinctrl-names = "default"; 229 pinctrl-0 = <&pinctrl_pwm1>; 230 status = "okay"; 231}; 232 233&uart2 { 234 pinctrl-names = "default"; 235 pinctrl-0 = <&pinctrl_uart2>; 236 status = "okay"; 237}; 238 239&uart3 { 240 pinctrl-names = "default"; 241 pinctrl-0 = <&pinctrl_uart3>; 242 uart-has-rtscts; 243 status = "disabled"; 244}; 245 246&usbh1 { 247 vbus-supply = <®_usb_h1_vbus>; 248 disable-over-current; 249 status = "disabled"; 250}; 251 252&usbotg { 253 pinctrl-names = "default"; 254 pinctrl-0 = <&pinctrl_usbotg>; 255 vbus-supply = <®_usbotg_vbus>; 256 disable-over-current; 257 status = "disabled"; 258}; 259 260&usdhc1 { 261 pinctrl-names = "default"; 262 pinctrl-0 = <&pinctrl_usdhc1>; 263 cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; 264 no-1-8-v; 265 disable-wp; 266 status = "disabled"; 267}; 268 269&iomuxc { 270 pinctrl_panel_en: panelen1grp { 271 fsl,pins = < 272 MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 273 >; 274 }; 275 276 pinctrl_en_switch: enswitchgrp { 277 fsl,pins = < 278 MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0xb0b1 279 >; 280 }; 281 282 pinctrl_flexcan1: flexcan1grp { 283 fsl,pins = < 284 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 285 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 286 >; 287 }; 288 289 pinctrl_flexcan1_en: flexcan1engrp { 290 fsl,pins = < 291 MX6QDL_PAD_EIM_A18__GPIO2_IO20 0xb0b1 292 >; 293 }; 294 295 pinctrl_gpioleds: gpioledsgrp { 296 fsl,pins = < 297 MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 298 MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 299 MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x1b0b0 300 >; 301 }; 302 303 pinctrl_hdmicec: hdmicecgrp { 304 fsl,pins = < 305 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 306 >; 307 }; 308 309 pinctrl_i2c1: i2c1grp { 310 fsl,pins = < 311 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 312 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 313 >; 314 }; 315 316 pinctrl_i2c1_gpio: i2c1gpiogrp { 317 fsl,pins = < 318 MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 319 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 320 >; 321 }; 322 323 pinctrl_i2c2: i2c2grp { 324 fsl,pins = < 325 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 326 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 327 >; 328 }; 329 330 pinctrl_i2c2_gpio: i2c2gpiogrp { 331 fsl,pins = < 332 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 333 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 334 >; 335 }; 336 337 pinctrl_pcie: pciegrp { 338 fsl,pins = < 339 MX6QDL_PAD_EIM_OE__GPIO2_IO25 0xb0b1 340 >; 341 }; 342 343 pinctrl_pcie_reg: pciereggrp { 344 fsl,pins = < 345 MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0xb0b1 346 >; 347 }; 348 349 pinctrl_pwm1: pwm1grp { 350 fsl,pins = < 351 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 352 >; 353 }; 354 355 pinctrl_rtc_int: rtcintgrp { 356 fsl,pins = < 357 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 358 >; 359 }; 360 361 pinctrl_stmpe: stmpegrp { 362 fsl,pins = < 363 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 364 >; 365 }; 366 367 pinctrl_uart2: uart2grp { 368 fsl,pins = < 369 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 370 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 371 >; 372 }; 373 374 pinctrl_uart3: uart3grp { 375 fsl,pins = < 376 MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1b0b1 377 MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 378 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 379 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 380 >; 381 }; 382 383 pinctrl_usbh1_vbus: usbh1vbusgrp { 384 fsl,pins = < 385 MX6QDL_PAD_EIM_A20__GPIO2_IO18 0xb0b1 386 >; 387 }; 388 389 pinctrl_usbotg: usbotggrp { 390 fsl,pins = < 391 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 392 >; 393 }; 394 395 pinctrl_usbotg_vbus: usbotgvbusgrp { 396 fsl,pins = < 397 MX6QDL_PAD_EIM_A19__GPIO2_IO19 0xb0b1 398 >; 399 }; 400 401 pinctrl_usdhc1: usdhc1grp { 402 fsl,pins = < 403 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 404 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 405 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 406 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 407 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 408 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 409 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 /* CD */ 410 >; 411 }; 412};