imx6qdl-phytec-pfla02.dtsi (10561B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7 8/ { 9 model = "Phytec phyFLEX-i.MX6 Quad"; 10 compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; 11 12 memory@10000000 { 13 device_type = "memory"; 14 reg = <0x10000000 0x80000000>; 15 }; 16 17 regulators { 18 compatible = "simple-bus"; 19 #address-cells = <1>; 20 #size-cells = <0>; 21 22 reg_usb_otg_vbus: regulator@0 { 23 compatible = "regulator-fixed"; 24 reg = <0>; 25 regulator-name = "usb_otg_vbus"; 26 regulator-min-microvolt = <5000000>; 27 regulator-max-microvolt = <5000000>; 28 gpio = <&gpio4 15 0>; 29 enable-active-high; 30 }; 31 32 reg_usb_h1_vbus: regulator@1 { 33 compatible = "regulator-fixed"; 34 pinctrl-names = "default"; 35 pinctrl-0 = <&pinctrl_usbh1_vbus>; 36 reg = <1>; 37 regulator-name = "usb_h1_vbus"; 38 regulator-min-microvolt = <5000000>; 39 regulator-max-microvolt = <5000000>; 40 gpio = <&gpio1 0 0>; 41 enable-active-high; 42 }; 43 }; 44 45 gpio_leds: leds { 46 pinctrl-names = "default"; 47 pinctrl-0 = <&pinctrl_leds>; 48 compatible = "gpio-leds"; 49 50 led_green: green { 51 label = "phyflex:green"; 52 gpios = <&gpio1 30 0>; 53 }; 54 55 led_red: red { 56 label = "phyflex:red"; 57 gpios = <&gpio2 31 0>; 58 }; 59 }; 60}; 61 62&audmux { 63 pinctrl-names = "default"; 64 pinctrl-0 = <&pinctrl_audmux>; 65 status = "disabled"; 66}; 67 68&can1 { 69 pinctrl-names = "default"; 70 pinctrl-0 = <&pinctrl_flexcan1>; 71 status = "disabled"; 72}; 73 74&ecspi3 { 75 pinctrl-names = "default"; 76 pinctrl-0 = <&pinctrl_ecspi3>; 77 status = "okay"; 78 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 79 80 som_flash: flash@0 { 81 compatible = "m25p80", "jedec,spi-nor"; 82 spi-max-frequency = <20000000>; 83 reg = <0>; 84 }; 85}; 86 87&fec { 88 pinctrl-names = "default"; 89 pinctrl-0 = <&pinctrl_enet>; 90 phy-handle = <ðphy>; 91 phy-mode = "rgmii"; 92 phy-reset-duration = <10>; /* in msecs */ 93 phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; 94 phy-supply = <&vdd_eth_io_reg>; 95 status = "disabled"; 96 97 fec_mdio: mdio { 98 #address-cells = <1>; 99 #size-cells = <0>; 100 101 ethphy: ethernet-phy@0 { 102 compatible = "ethernet-phy-ieee802.3-c22"; 103 reg = <0>; 104 txc-skew-ps = <1680>; 105 rxc-skew-ps = <1860>; 106 }; 107 }; 108}; 109 110&gpmi { 111 pinctrl-names = "default"; 112 pinctrl-0 = <&pinctrl_gpmi_nand>; 113 nand-on-flash-bbt; 114 status = "okay"; 115}; 116 117&i2c1 { 118 pinctrl-names = "default"; 119 pinctrl-0 = <&pinctrl_i2c1>; 120 status = "okay"; 121 122 som_eeprom: eeprom@50 { 123 compatible = "catalyst,24c32", "atmel,24c32"; 124 pagesize = <32>; 125 reg = <0x50>; 126 }; 127 128 pmic@58 { 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_pmic>; 131 compatible = "dlg,da9063"; 132 reg = <0x58>; 133 interrupt-parent = <&gpio2>; 134 interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ 135 interrupt-controller; 136 137 regulators { 138 vddcore_reg: bcore1 { 139 regulator-min-microvolt = <730000>; 140 regulator-max-microvolt = <1380000>; 141 regulator-always-on; 142 }; 143 144 vddsoc_reg: bcore2 { 145 regulator-min-microvolt = <730000>; 146 regulator-max-microvolt = <1380000>; 147 regulator-always-on; 148 }; 149 150 vdd_ddr3_reg: bpro { 151 regulator-min-microvolt = <1500000>; 152 regulator-max-microvolt = <1500000>; 153 regulator-always-on; 154 }; 155 156 vdd_3v3_reg: bperi { 157 regulator-min-microvolt = <3300000>; 158 regulator-max-microvolt = <3300000>; 159 regulator-always-on; 160 }; 161 162 vdd_buckmem_reg: bmem { 163 regulator-min-microvolt = <3300000>; 164 regulator-max-microvolt = <3300000>; 165 regulator-always-on; 166 }; 167 168 vdd_eth_reg: bio { 169 regulator-min-microvolt = <1200000>; 170 regulator-max-microvolt = <1200000>; 171 regulator-always-on; 172 }; 173 174 vdd_eth_io_reg: ldo4 { 175 regulator-min-microvolt = <2500000>; 176 regulator-max-microvolt = <2500000>; 177 regulator-always-on; 178 }; 179 180 vdd_mx6_snvs_reg: ldo5 { 181 regulator-min-microvolt = <3000000>; 182 regulator-max-microvolt = <3000000>; 183 regulator-always-on; 184 }; 185 186 vdd_3v3_pmic_io_reg: ldo6 { 187 regulator-min-microvolt = <3300000>; 188 regulator-max-microvolt = <3300000>; 189 regulator-always-on; 190 }; 191 192 vdd_sd0_reg: ldo9 { 193 regulator-min-microvolt = <3300000>; 194 regulator-max-microvolt = <3300000>; 195 }; 196 197 vdd_sd1_reg: ldo10 { 198 regulator-min-microvolt = <3300000>; 199 regulator-max-microvolt = <3300000>; 200 }; 201 202 vdd_mx6_high_reg: ldo11 { 203 regulator-min-microvolt = <3000000>; 204 regulator-max-microvolt = <3000000>; 205 regulator-always-on; 206 }; 207 }; 208 209 da9063_rtc: rtc { 210 compatible = "dlg,da9063-rtc"; 211 }; 212 213 da9063_wdog: watchdog { 214 compatible = "dlg,da9063-watchdog"; 215 }; 216 217 onkey { 218 compatible = "dlg,da9063-onkey"; 219 status = "disabled"; 220 }; 221 }; 222}; 223 224&i2c2 { 225 pinctrl-names = "default"; 226 pinctrl-0 = <&pinctrl_i2c2>; 227 clock-frequency = <100000>; 228}; 229 230&i2c3 { 231 pinctrl-names = "default"; 232 pinctrl-0 = <&pinctrl_i2c3>; 233 clock-frequency = <100000>; 234}; 235 236&iomuxc { 237 imx6q-phytec-pfla02 { 238 pinctrl_ecspi3: ecspi3grp { 239 fsl,pins = < 240 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 241 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 242 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 243 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* CS0 */ 244 >; 245 }; 246 247 pinctrl_enet: enetgrp { 248 fsl,pins = < 249 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 250 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 251 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 252 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 253 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 254 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 255 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 256 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 257 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 258 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 259 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 260 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 261 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 262 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 263 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 264 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 265 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 /* Reset GPIO */ 266 >; 267 }; 268 269 pinctrl_flexcan1: flexcan1grp { 270 fsl,pins = < 271 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 272 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 273 >; 274 }; 275 276 pinctrl_gpmi_nand: gpminandgrp { 277 fsl,pins = < 278 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 279 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 280 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 281 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 282 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 283 MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 284 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 285 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 286 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 287 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 288 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 289 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 290 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 291 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 292 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 293 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 294 MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 295 >; 296 }; 297 298 pinctrl_i2c1: i2c1grp { 299 fsl,pins = < 300 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 301 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 302 >; 303 }; 304 305 pinctrl_i2c2: i2c2grp { 306 fsl,pins = < 307 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 308 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 309 >; 310 }; 311 312 pinctrl_i2c3: i2c3grp { 313 fsl,pins = < 314 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 315 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 316 >; 317 }; 318 319 pinctrl_leds: ledsgrp { 320 fsl,pins = < 321 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ 322 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ 323 >; 324 }; 325 326 pinctrl_pcie: pciegrp { 327 fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; 328 }; 329 330 pinctrl_pmic: pmicgrp { 331 fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000>; /* PMIC interrupt */ 332 }; 333 334 pinctrl_uart3: uart3grp { 335 fsl,pins = < 336 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 337 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 338 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 339 MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 340 >; 341 }; 342 343 pinctrl_uart4: uart4grp { 344 fsl,pins = < 345 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 346 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 347 >; 348 }; 349 350 pinctrl_usbh1_vbus: usbh1vbusgrp { 351 fsl,pins = < 352 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 353 >; 354 }; 355 356 pinctrl_usbotg: usbotggrp { 357 fsl,pins = < 358 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 359 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 360 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 361 >; 362 }; 363 364 pinctrl_usdhc2: usdhc2grp { 365 fsl,pins = < 366 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 367 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 368 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 369 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 370 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 371 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 372 >; 373 }; 374 375 pinctrl_usdhc3: usdhc3grp { 376 fsl,pins = < 377 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 378 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 379 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 380 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 381 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 382 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 383 >; 384 }; 385 386 pinctrl_usdhc3_cdwp: usdhc3cdwp { 387 fsl,pins = < 388 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 389 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 390 >; 391 }; 392 393 pinctrl_audmux: audmuxgrp { 394 fsl,pins = < 395 MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 396 MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 397 MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 398 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 399 >; 400 }; 401 }; 402}; 403 404&pcie { 405 pinctrl-names = "default"; 406 pinctrl-0 = <&pinctrl_pcie>; 407 reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>; 408 status = "disabled"; 409}; 410 411®_arm { 412 vin-supply = <&vddcore_reg>; 413}; 414 415®_pu { 416 vin-supply = <&vddsoc_reg>; 417}; 418 419®_soc { 420 vin-supply = <&vddsoc_reg>; 421}; 422 423&uart3 { 424 pinctrl-names = "default"; 425 pinctrl-0 = <&pinctrl_uart3>; 426 uart-has-rtscts; 427 status = "disabled"; 428}; 429 430&uart4 { 431 pinctrl-names = "default"; 432 pinctrl-0 = <&pinctrl_uart4>; 433 status = "disabled"; 434}; 435 436&usbh1 { 437 vbus-supply = <®_usb_h1_vbus>; 438 status = "disabled"; 439}; 440 441&usbotg { 442 vbus-supply = <®_usb_otg_vbus>; 443 pinctrl-names = "default"; 444 pinctrl-0 = <&pinctrl_usbotg>; 445 disable-over-current; 446 status = "disabled"; 447}; 448 449&usdhc2 { 450 pinctrl-names = "default"; 451 pinctrl-0 = <&pinctrl_usdhc2>; 452 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 453 wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; 454 vmmc-supply = <&vdd_sd1_reg>; 455 status = "disabled"; 456}; 457 458&usdhc3 { 459 pinctrl-names = "default"; 460 pinctrl-0 = <&pinctrl_usdhc3 461 &pinctrl_usdhc3_cdwp>; 462 cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; 463 wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; 464 vmmc-supply = <&vdd_sd0_reg>; 465 status = "disabled"; 466};