imx6qdl-phytec-phycore-som.dtsi (7184B)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2018 PHYTEC Messtechnik GmbH 4 * Author: Christian Hemp <c.hemp@phytec.de> 5 */ 6 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/regulator/dlg,da9063-regulator.h> 9 10/ { 11 aliases { 12 rtc1 = &da9062_rtc; 13 rtc2 = &snvs_rtc; 14 }; 15 16 /* 17 * Set the minimum memory size here and 18 * let the bootloader set the real size. 19 */ 20 memory@10000000 { 21 device_type = "memory"; 22 reg = <0x10000000 0x8000000>; 23 }; 24 25 gpio_leds_som: somleds { 26 compatible = "gpio-leds"; 27 pinctrl-names = "default"; 28 pinctrl-0 = <&pinctrl_gpioleds_som>; 29 30 som-led-green { 31 label = "phycore:green"; 32 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; 33 linux,default-trigger = "heartbeat"; 34 }; 35 }; 36}; 37 38&ecspi1 { 39 pinctrl-names = "default"; 40 pinctrl-0 = <&pinctrl_ecspi1>; 41 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 42 status = "okay"; 43 44 m25p80: flash@0 { 45 compatible = "jedec,spi-nor"; 46 spi-max-frequency = <20000000>; 47 reg = <0>; 48 status = "disabled"; 49 }; 50}; 51 52&fec { 53 pinctrl-names = "default"; 54 pinctrl-0 = <&pinctrl_enet>; 55 phy-handle = <ðphy>; 56 phy-mode = "rgmii"; 57 phy-supply = <&vdd_eth_io>; 58 phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; 59 status = "disabled"; 60 61 mdio { 62 #address-cells = <1>; 63 #size-cells = <0>; 64 65 ethphy: ethernet-phy@3 { 66 reg = <3>; 67 txc-skew-ps = <1680>; 68 rxc-skew-ps = <1860>; 69 }; 70 }; 71}; 72 73&gpmi { 74 pinctrl-names = "default"; 75 pinctrl-0 = <&pinctrl_gpmi_nand>; 76 nand-on-flash-bbt; 77 status = "disabled"; 78}; 79 80&i2c3 { 81 pinctrl-names = "default", "gpio"; 82 pinctrl-0 = <&pinctrl_i2c3>; 83 pinctrl-1 = <&pinctrl_i2c3_gpio>; 84 scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 85 sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 86 clock-frequency = <400000>; 87 status = "okay"; 88 89 eeprom@50 { 90 compatible = "st,24c32", "atmel,24c32"; 91 pagesize = <32>; 92 reg = <0x50>; 93 }; 94 95 pmic: pmic@58 { 96 compatible = "dlg,da9062"; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pinctrl_pmic>; 99 reg = <0x58>; 100 interrupt-parent = <&gpio1>; 101 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 102 interrupt-controller; 103 gpio-controller; 104 #gpio-cells = <2>; 105 106 da9062_rtc: rtc { 107 compatible = "dlg,da9062-rtc"; 108 }; 109 110 da9062_onkey: onkey { 111 compatible = "dlg,da9062-onkey"; 112 }; 113 114 watchdog { 115 compatible = "dlg,da9062-watchdog"; 116 dlg,use-sw-pm; 117 }; 118 119 thermal { 120 compatible = "dlg,da9062-thermal"; 121 status = "disabled"; 122 }; 123 124 gpio { 125 compatible = "dlg,da9062-gpio"; 126 status = "disabled"; 127 }; 128 129 regulators { 130 vdd_arm: buck1 { 131 regulator-name = "vdd_arm"; 132 regulator-min-microvolt = <925000>; 133 regulator-max-microvolt = <1380000>; 134 regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; 135 regulator-always-on; 136 }; 137 138 vdd_soc: buck2 { 139 regulator-name = "vdd_soc"; 140 regulator-min-microvolt = <1150000>; 141 regulator-max-microvolt = <1380000>; 142 regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; 143 regulator-always-on; 144 }; 145 146 vdd_ddr3_1p5: buck3 { 147 regulator-name = "vdd_ddr3"; 148 regulator-min-microvolt = <1500000>; 149 regulator-max-microvolt = <1500000>; 150 regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; 151 regulator-always-on; 152 }; 153 154 vdd_eth_1p2: buck4 { 155 regulator-name = "vdd_eth"; 156 regulator-min-microvolt = <1200000>; 157 regulator-max-microvolt = <1200000>; 158 regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; 159 regulator-always-on; 160 }; 161 162 vdd_snvs: ldo1 { 163 regulator-name = "vdd_snvs"; 164 regulator-min-microvolt = <3000000>; 165 regulator-max-microvolt = <3000000>; 166 regulator-always-on; 167 }; 168 169 vdd_high: ldo2 { 170 regulator-name = "vdd_high"; 171 regulator-min-microvolt = <3000000>; 172 regulator-max-microvolt = <3000000>; 173 regulator-always-on; 174 }; 175 176 vdd_eth_io: ldo3 { 177 regulator-name = "vdd_eth_io"; 178 regulator-min-microvolt = <2500000>; 179 regulator-max-microvolt = <2500000>; 180 }; 181 182 vdd_emmc_1p8: ldo4 { 183 regulator-name = "vdd_emmc"; 184 regulator-min-microvolt = <1800000>; 185 regulator-max-microvolt = <1800000>; 186 }; 187 }; 188 }; 189}; 190 191®_arm { 192 vin-supply = <&vdd_arm>; 193}; 194 195®_pu { 196 vin-supply = <&vdd_soc>; 197}; 198 199®_soc { 200 vin-supply = <&vdd_soc>; 201}; 202 203&snvs_poweroff { 204 status = "okay"; 205}; 206 207&usdhc4 { 208 pinctrl-names = "default"; 209 pinctrl-0 = <&pinctrl_usdhc4>; 210 bus-width = <8>; 211 non-removable; 212 status = "disabled"; 213}; 214 215&iomuxc { 216 pinctrl_enet: enetgrp { 217 fsl,pins = < 218 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 219 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 220 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 221 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 222 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 223 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 224 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 225 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 226 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 227 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 228 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 229 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 230 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 231 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 232 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 233 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 234 MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 235 >; 236 }; 237 238 pinctrl_gpioleds_som: gpioledssomgrp { 239 fsl,pins = < 240 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 241 >; 242 }; 243 244 pinctrl_gpmi_nand: gpminandgrp { 245 fsl,pins = < 246 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 247 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 248 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 249 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 250 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 251 MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 252 MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 253 MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 254 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 255 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 256 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 257 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 258 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 259 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 260 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 261 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 262 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 263 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 264 MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 265 >; 266 }; 267 268 pinctrl_i2c3: i2c3grp { 269 fsl,pins = < 270 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 271 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 272 >; 273 }; 274 275 pinctrl_i2c3_gpio: i2c3gpiogrp { 276 fsl,pins = < 277 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 278 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1 279 >; 280 }; 281 282 pinctrl_ecspi1: ecspi1grp { 283 fsl,pins = < 284 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 285 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 286 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 287 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 288 >; 289 }; 290 291 pinctrl_pmic: pmicgrp { 292 fsl,pins = < 293 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 294 >; 295 }; 296 297 pinctrl_usdhc4: usdhc4grp { 298 fsl,pins = < 299 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 300 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 301 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 302 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 303 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 304 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 305 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 306 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 307 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 308 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 309 >; 310 }; 311};