imx6qdl-tx6.dtsi (20644B)
1/* 2 * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively, 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use, 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42#include <dt-bindings/gpio/gpio.h> 43#include <dt-bindings/input/input.h> 44#include <dt-bindings/interrupt-controller/irq.h> 45#include <dt-bindings/pwm/pwm.h> 46#include <dt-bindings/sound/fsl-imx-audmux.h> 47 48/ { 49 aliases { 50 can0 = &can2; 51 can1 = &can1; 52 ethernet0 = &fec; 53 lcdif-23bit-pins-a = &pinctrl_disp0_1; 54 lcdif-24bit-pins-a = &pinctrl_disp0_2; 55 pwm0 = &pwm1; 56 pwm1 = &pwm2; 57 reg-can-xcvr = ®_can_xcvr; 58 stk5led = &user_led; 59 usbotg = &usbotg; 60 sdhc0 = &usdhc1; 61 sdhc1 = &usdhc2; 62 }; 63 64 memory@10000000 { 65 device_type = "memory"; 66 reg = <0x10000000 0>; /* will be filled by U-Boot */ 67 }; 68 69 clocks { 70 #address-cells = <1>; 71 #size-cells = <0>; 72 73 mclk: clock@0 { 74 compatible = "fixed-clock"; 75 reg = <0>; 76 #clock-cells = <0>; 77 clock-frequency = <26000000>; 78 }; 79 }; 80 81 gpio-keys { 82 compatible = "gpio-keys"; 83 84 power { 85 label = "Power Button"; 86 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; 87 linux,code = <KEY_POWER>; 88 wakeup-source; 89 }; 90 }; 91 92 leds { 93 compatible = "gpio-leds"; 94 95 user_led: user { 96 label = "Heartbeat"; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pinctrl_user_led>; 99 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; 100 linux,default-trigger = "heartbeat"; 101 }; 102 }; 103 104 reg_3v3_etn: regulator-3v3-etn { 105 compatible = "regulator-fixed"; 106 regulator-name = "3V3_ETN"; 107 regulator-min-microvolt = <3300000>; 108 regulator-max-microvolt = <3300000>; 109 pinctrl-names = "default"; 110 pinctrl-0 = <&pinctrl_etnphy_power>; 111 gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; 112 enable-active-high; 113 }; 114 115 reg_2v5: regulator-2v5 { 116 compatible = "regulator-fixed"; 117 regulator-name = "2V5"; 118 regulator-min-microvolt = <2500000>; 119 regulator-max-microvolt = <2500000>; 120 regulator-always-on; 121 }; 122 123 reg_3v3: regulator-3v3 { 124 compatible = "regulator-fixed"; 125 regulator-name = "3V3"; 126 regulator-min-microvolt = <3300000>; 127 regulator-max-microvolt = <3300000>; 128 regulator-always-on; 129 }; 130 131 reg_can_xcvr: regulator-can-xcvr { 132 compatible = "regulator-fixed"; 133 regulator-name = "CAN XCVR"; 134 regulator-min-microvolt = <3300000>; 135 regulator-max-microvolt = <3300000>; 136 pinctrl-names = "default"; 137 pinctrl-0 = <&pinctrl_flexcan_xcvr>; 138 gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; 139 }; 140 141 reg_lcd0_pwr: regulator-lcd0-pwr { 142 compatible = "regulator-fixed"; 143 regulator-name = "LCD0 POWER"; 144 regulator-min-microvolt = <3300000>; 145 regulator-max-microvolt = <3300000>; 146 pinctrl-names = "default"; 147 pinctrl-0 = <&pinctrl_lcd0_pwr>; 148 gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; 149 enable-active-high; 150 status = "disabled"; 151 }; 152 153 reg_lcd1_pwr: regulator-lcd1-pwr { 154 compatible = "regulator-fixed"; 155 regulator-name = "LCD1 POWER"; 156 regulator-min-microvolt = <3300000>; 157 regulator-max-microvolt = <3300000>; 158 pinctrl-names = "default"; 159 pinctrl-0 = <&pinctrl_lcd1_pwr>; 160 gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; 161 enable-active-high; 162 status = "disabled"; 163 }; 164 165 reg_usbh1_vbus: regulator-usbh1-vbus { 166 compatible = "regulator-fixed"; 167 regulator-name = "usbh1_vbus"; 168 regulator-min-microvolt = <5000000>; 169 regulator-max-microvolt = <5000000>; 170 pinctrl-names = "default"; 171 pinctrl-0 = <&pinctrl_usbh1_vbus>; 172 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; 173 enable-active-high; 174 }; 175 176 reg_usbotg_vbus: regulator-usbotg-vbus { 177 compatible = "regulator-fixed"; 178 regulator-name = "usbotg_vbus"; 179 regulator-min-microvolt = <5000000>; 180 regulator-max-microvolt = <5000000>; 181 pinctrl-names = "default"; 182 pinctrl-0 = <&pinctrl_usbotg_vbus>; 183 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; 184 enable-active-high; 185 }; 186 187 sound { 188 compatible = "karo,imx6qdl-tx6-sgtl5000", 189 "simple-audio-card"; 190 simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio"; 191 pinctrl-names = "default"; 192 pinctrl-0 = <&pinctrl_audmux>; 193 simple-audio-card,format = "i2s"; 194 simple-audio-card,bitclock-master = <&codec_dai>; 195 simple-audio-card,frame-master = <&codec_dai>; 196 simple-audio-card,widgets = 197 "Microphone", "Mic Jack", 198 "Line", "Line In", 199 "Line", "Line Out", 200 "Headphone", "Headphone Jack"; 201 simple-audio-card,routing = 202 "MIC_IN", "Mic Jack", 203 "Mic Jack", "Mic Bias", 204 "Headphone Jack", "HP_OUT"; 205 206 cpu_dai: simple-audio-card,cpu { 207 sound-dai = <&ssi1>; 208 }; 209 210 codec_dai: simple-audio-card,codec { 211 sound-dai = <&sgtl5000>; 212 }; 213 }; 214}; 215 216&audmux { 217 status = "okay"; 218 219 ssi1 { 220 fsl,audmux-port = <0>; 221 fsl,port-config = < 222 (IMX_AUDMUX_V2_PTCR_SYN | 223 IMX_AUDMUX_V2_PTCR_TFSEL(4) | 224 IMX_AUDMUX_V2_PTCR_TCSEL(4) | 225 IMX_AUDMUX_V2_PTCR_TFSDIR | 226 IMX_AUDMUX_V2_PTCR_TCLKDIR) 227 IMX_AUDMUX_V2_PDCR_RXDSEL(4) 228 >; 229 }; 230 231 pins5 { 232 fsl,audmux-port = <4>; 233 fsl,port-config = < 234 IMX_AUDMUX_V2_PTCR_SYN 235 IMX_AUDMUX_V2_PDCR_RXDSEL(0) 236 >; 237 }; 238}; 239 240&can1 { 241 pinctrl-names = "default"; 242 pinctrl-0 = <&pinctrl_flexcan1>; 243 xceiver-supply = <®_can_xcvr>; 244 status = "okay"; 245}; 246 247&can2 { 248 pinctrl-names = "default"; 249 pinctrl-0 = <&pinctrl_flexcan2>; 250 xceiver-supply = <®_can_xcvr>; 251 status = "okay"; 252}; 253 254&ecspi1 { 255 pinctrl-names = "default"; 256 pinctrl-0 = <&pinctrl_ecspi1>; 257 cs-gpios = < 258 &gpio2 30 GPIO_ACTIVE_HIGH 259 &gpio3 19 GPIO_ACTIVE_HIGH 260 >; 261 status = "disabled"; 262}; 263 264&fec { 265 pinctrl-names = "default"; 266 pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; 267 phy-mode = "rmii"; 268 phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; 269 phy-reset-post-delay = <10>; 270 phy-handle = <&etnphy>; 271 phy-supply = <®_3v3_etn>; 272 status = "okay"; 273 274 mdio { 275 #address-cells = <1>; 276 #size-cells = <0>; 277 278 etnphy: ethernet-phy@0 { 279 compatible = "ethernet-phy-ieee802.3-c22"; 280 reg = <0>; 281 pinctrl-names = "default"; 282 pinctrl-0 = <&pinctrl_etnphy_int>; 283 interrupt-parent = <&gpio7>; 284 interrupts = <1 IRQ_TYPE_EDGE_FALLING>; 285 }; 286 }; 287}; 288 289&gpmi { 290 pinctrl-names = "default"; 291 pinctrl-0 = <&pinctrl_gpmi_nand>; 292 nand-on-flash-bbt; 293 fsl,no-blockmark-swap; 294 status = "okay"; 295}; 296 297&i2c1 { 298 pinctrl-names = "default", "gpio"; 299 pinctrl-0 = <&pinctrl_i2c1>; 300 pinctrl-1 = <&pinctrl_i2c1_gpio>; 301 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 302 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; 303 clock-frequency = <400000>; 304 status = "okay"; 305 306 ds1339: rtc@68 { 307 compatible = "dallas,ds1339"; 308 reg = <0x68>; 309 trickle-resistor-ohms = <250>; 310 trickle-diode-disable; 311 }; 312}; 313 314&i2c3 { 315 pinctrl-names = "default", "gpio"; 316 pinctrl-0 = <&pinctrl_i2c3>; 317 pinctrl-1 = <&pinctrl_i2c3_gpio>; 318 scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; 319 sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; 320 clock-frequency = <400000>; 321 status = "okay"; 322 323 sgtl5000: sgtl5000@a { 324 compatible = "fsl,sgtl5000"; 325 #sound-dai-cells = <0>; 326 reg = <0x0a>; 327 VDDA-supply = <®_2v5>; 328 VDDIO-supply = <®_3v3>; 329 clocks = <&mclk>; 330 }; 331 332 polytouch: edt-ft5x06@38 { 333 compatible = "edt,edt-ft5x06"; 334 reg = <0x38>; 335 pinctrl-names = "default"; 336 pinctrl-0 = <&pinctrl_edt_ft5x06>; 337 interrupt-parent = <&gpio6>; 338 interrupts = <15 IRQ_TYPE_EDGE_FALLING>; 339 reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; 340 wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; 341 wakeup-source; 342 }; 343 344 touchscreen: tsc2007@48 { 345 compatible = "ti,tsc2007"; 346 reg = <0x48>; 347 pinctrl-names = "default"; 348 pinctrl-0 = <&pinctrl_tsc2007>; 349 interrupt-parent = <&gpio3>; 350 interrupts = <26 0>; 351 gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; 352 ti,x-plate-ohms = <660>; 353 wakeup-source; 354 }; 355}; 356 357&iomuxc { 358 pinctrl-names = "default"; 359 pinctrl-0 = <&pinctrl_hog>; 360 361 pinctrl_hog: hoggrp { 362 fsl,pins = < 363 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ 364 >; 365 }; 366 367 pinctrl_audmux: audmuxgrp { 368 fsl,pins = < 369 MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ 370 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ 371 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ 372 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ 373 >; 374 }; 375 376 pinctrl_disp0_1: disp0grp-1 { 377 fsl,pins = < 378 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 379 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 380 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 381 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 382 /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ 383 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 384 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 385 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 386 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 387 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 388 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 389 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 390 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 391 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 392 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 393 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 394 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 395 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 396 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 397 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 398 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 399 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 400 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 401 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 402 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 403 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 404 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 405 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 406 >; 407 }; 408 409 pinctrl_disp0_2: disp0grp-2 { 410 fsl,pins = < 411 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 412 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 413 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 414 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 415 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 416 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 417 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 418 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 419 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 420 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 421 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 422 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 423 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 424 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 425 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 426 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 427 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 428 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 429 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 430 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 431 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 432 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 433 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 434 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 435 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 436 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 437 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 438 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 439 >; 440 }; 441 442 pinctrl_ecspi1: ecspi1grp { 443 fsl,pins = < 444 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0 445 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0 446 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0 447 MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0 448 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */ 449 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */ 450 >; 451 }; 452 453 pinctrl_edt_ft5x06: edt-ft5x06grp { 454 fsl,pins = < 455 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ 456 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ 457 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ 458 >; 459 }; 460 461 pinctrl_enet: enetgrp { 462 fsl,pins = < 463 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 464 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 465 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 466 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 467 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 468 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 469 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 470 >; 471 }; 472 473 pinctrl_enet_mdio: enet-mdiogrp { 474 fsl,pins = < 475 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 476 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 477 >; 478 }; 479 480 pinctrl_etnphy_int: etnphy-intgrp { 481 fsl,pins = < 482 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ 483 >; 484 }; 485 486 pinctrl_etnphy_power: etnphy-pwrgrp { 487 fsl,pins = < 488 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ 489 >; 490 }; 491 492 pinctrl_etnphy_rst: etnphy-rstgrp { 493 fsl,pins = < 494 MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ 495 >; 496 }; 497 498 pinctrl_flexcan1: flexcan1grp { 499 fsl,pins = < 500 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 501 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 502 >; 503 }; 504 505 pinctrl_flexcan2: flexcan2grp { 506 fsl,pins = < 507 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 508 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 509 >; 510 }; 511 512 pinctrl_flexcan_xcvr: flexcan-xcvrgrp { 513 fsl,pins = < 514 MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ 515 >; 516 }; 517 518 pinctrl_gpmi_nand: gpminandgrp { 519 fsl,pins = < 520 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 521 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 522 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 523 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 524 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 525 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 526 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 527 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 528 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 529 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 530 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 531 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 532 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 533 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 534 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 535 >; 536 }; 537 538 pinctrl_i2c1: i2c1grp { 539 fsl,pins = < 540 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 541 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 542 >; 543 }; 544 545 pinctrl_i2c1_gpio: i2c1-gpiogrp { 546 fsl,pins = < 547 MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 548 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 549 >; 550 }; 551 552 pinctrl_i2c3: i2c3grp { 553 fsl,pins = < 554 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 555 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 556 >; 557 }; 558 559 pinctrl_i2c3_gpio: i2c3-gpiogrp { 560 fsl,pins = < 561 MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 562 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 563 >; 564 }; 565 566 pinctrl_kpp: kppgrp { 567 fsl,pins = < 568 MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 569 MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 570 MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 571 MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 572 MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 573 MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 574 MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 575 MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 576 >; 577 }; 578 579 pinctrl_lcd0_pwr: lcd0-pwrgrp { 580 fsl,pins = < 581 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ 582 >; 583 }; 584 585 pinctrl_lcd1_pwr: lcd-pwrgrp { 586 fsl,pins = < 587 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ 588 >; 589 }; 590 591 pinctrl_pwm1: pwm1grp { 592 fsl,pins = < 593 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 594 >; 595 }; 596 597 pinctrl_pwm2: pwm2grp { 598 fsl,pins = < 599 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 600 >; 601 }; 602 603 pinctrl_tsc2007: tsc2007grp { 604 fsl,pins = < 605 MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ 606 >; 607 }; 608 609 pinctrl_uart1: uart1grp { 610 fsl,pins = < 611 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 612 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 613 >; 614 }; 615 616 pinctrl_uart1_rtscts: uart1_rtsctsgrp { 617 fsl,pins = < 618 MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 619 MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 620 >; 621 }; 622 623 pinctrl_uart2: uart2grp { 624 fsl,pins = < 625 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 626 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 627 >; 628 }; 629 630 pinctrl_uart2_rtscts: uart2_rtsctsgrp { 631 fsl,pins = < 632 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 633 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 634 >; 635 }; 636 637 pinctrl_uart3: uart3grp { 638 fsl,pins = < 639 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 640 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 641 >; 642 }; 643 644 pinctrl_uart3_rtscts: uart3_rtsctsgrp { 645 fsl,pins = < 646 MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 647 MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 648 >; 649 }; 650 651 pinctrl_usbh1_vbus: usbh1-vbusgrp { 652 fsl,pins = < 653 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ 654 >; 655 }; 656 657 pinctrl_usbotg: usbotggrp { 658 fsl,pins = < 659 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 660 >; 661 }; 662 663 pinctrl_usbotg_vbus: usbotg-vbusgrp { 664 fsl,pins = < 665 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ 666 >; 667 }; 668 669 pinctrl_usdhc1: usdhc1grp { 670 fsl,pins = < 671 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 672 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 673 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 674 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 675 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 676 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 677 MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ 678 >; 679 }; 680 681 pinctrl_usdhc2: usdhc2grp { 682 fsl,pins = < 683 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1 684 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1 685 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1 686 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1 687 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1 688 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1 689 MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */ 690 >; 691 }; 692 693 pinctrl_user_led: user-ledgrp { 694 fsl,pins = < 695 MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ 696 >; 697 }; 698}; 699 700&kpp { 701 pinctrl-names = "default"; 702 pinctrl-0 = <&pinctrl_kpp>; 703 /* sample keymap */ 704 /* row/col 0,1 are mapped to KPP row/col 6,7 */ 705 linux,keymap = < 706 MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */ 707 MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */ 708 MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */ 709 MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */ 710 MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */ 711 MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */ 712 MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */ 713 MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */ 714 MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */ 715 MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */ 716 MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */ 717 >; 718 status = "okay"; 719}; 720 721&pwm1 { 722 pinctrl-names = "default"; 723 pinctrl-0 = <&pinctrl_pwm1>; 724 status = "disabled"; 725}; 726 727&pwm2 { 728 pinctrl-names = "default"; 729 pinctrl-0 = <&pinctrl_pwm2>; 730 status = "okay"; 731}; 732 733&ssi1 { 734 status = "okay"; 735}; 736 737&uart1 { 738 pinctrl-names = "default"; 739 pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; 740 uart-has-rtscts; 741 status = "okay"; 742}; 743 744&uart2 { 745 pinctrl-names = "default"; 746 pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; 747 uart-has-rtscts; 748 status = "okay"; 749}; 750 751&uart3 { 752 pinctrl-names = "default"; 753 pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; 754 uart-has-rtscts; 755 status = "okay"; 756}; 757 758&usbh1 { 759 vbus-supply = <®_usbh1_vbus>; 760 dr_mode = "host"; 761 disable-over-current; 762 status = "okay"; 763}; 764 765&usbotg { 766 vbus-supply = <®_usbotg_vbus>; 767 pinctrl-names = "default"; 768 pinctrl-0 = <&pinctrl_usbotg>; 769 dr_mode = "peripheral"; 770 disable-over-current; 771 status = "okay"; 772}; 773 774&usdhc1 { 775 pinctrl-names = "default"; 776 pinctrl-0 = <&pinctrl_usdhc1>; 777 bus-width = <4>; 778 no-1-8-v; 779 cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; 780 fsl,wp-controller; 781 status = "okay"; 782}; 783 784&usdhc2 { 785 pinctrl-names = "default"; 786 pinctrl-0 = <&pinctrl_usdhc2>; 787 bus-width = <4>; 788 no-1-8-v; 789 cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; 790 fsl,wp-controller; 791 status = "okay"; 792};