imx6qp-prtwd3.dts (12032B)
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright (c) 2018 Protonic Holland 4 * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix 5 */ 6 7/dts-v1/; 8#include <dt-bindings/gpio/gpio.h> 9#include "imx6qp.dtsi" 10 11/ { 12 model = "Protonic WD3 board"; 13 compatible = "prt,prtwd3", "fsl,imx6qp"; 14 15 chosen { 16 stdout-path = &uart4; 17 }; 18 19 memory@10000000 { 20 device_type = "memory"; 21 reg = <0x10000000 0x20000000>; 22 }; 23 24 memory@80000000 { 25 device_type = "memory"; 26 reg = <0x80000000 0x20000000>; 27 }; 28 29 clock_ksz8081: clock-ksz8081 { 30 compatible = "fixed-clock"; 31 #clock-cells = <0>; 32 clock-frequency = <50000000>; 33 }; 34 35 clock_ksz9031: clock-ksz9031 { 36 compatible = "fixed-clock"; 37 #clock-cells = <0>; 38 clock-frequency = <25000000>; 39 }; 40 41 clock_mcp251xfd: clock-mcp251xfd { 42 compatible = "fixed-clock"; 43 #clock-cells = <0>; 44 clock-frequency = <20000000>; 45 }; 46 47 clock_sja1105: clock-sja1105 { 48 compatible = "fixed-clock"; 49 #clock-cells = <0>; 50 clock-frequency = <25000000>; 51 }; 52 53 mdio { 54 compatible = "virtual,mdio-gpio"; 55 pinctrl-names = "default"; 56 pinctrl-0 = <&pinctrl_mdio>; 57 58 #address-cells = <1>; 59 #size-cells = <0>; 60 gpios = <&gpio5 6 GPIO_ACTIVE_HIGH 61 &gpio5 7 GPIO_ACTIVE_HIGH>; 62 63 /* Microchip KSZ8081 */ 64 usbeth_phy: ethernet-phy@3 { 65 reg = <0x3>; 66 67 interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>; 68 reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; 69 reset-assert-us = <500>; 70 reset-deassert-us = <1000>; 71 clocks = <&clock_ksz8081>; 72 clock-names = "rmii-ref"; 73 micrel,led-mode = <0>; 74 }; 75 76 tja1102_phy0: ethernet-phy@4 { 77 reg = <0x4>; 78 79 interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; 80 reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; 81 reset-assert-us = <20>; 82 reset-deassert-us = <2000>; 83 #address-cells = <1>; 84 #size-cells = <0>; 85 86 tja1102_phy1: ethernet-phy@5 { 87 reg = <0x5>; 88 89 interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; 90 }; 91 }; 92 }; 93 94 reg_5v0: regulator-5v0 { 95 compatible = "regulator-fixed"; 96 regulator-name = "5v0"; 97 regulator-min-microvolt = <5000000>; 98 regulator-max-microvolt = <5000000>; 99 }; 100 101 reg_otg_vbus: regulator-otg-vbus { 102 compatible = "regulator-fixed"; 103 regulator-name = "otg-vbus"; 104 regulator-min-microvolt = <5000000>; 105 regulator-max-microvolt = <5000000>; 106 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 107 enable-active-high; 108 }; 109 110 usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { 111 compatible = "mmc-pwrseq-simple"; 112 pinctrl-names = "default"; 113 pinctrl-0 = <&pinctrl_wifi_npd>; 114 reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; 115 }; 116}; 117 118&can1 { 119 pinctrl-names = "default"; 120 pinctrl-0 = <&pinctrl_can1>; 121 xceiver-supply = <®_5v0>; 122 status = "okay"; 123}; 124 125&ecspi2 { 126 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; 127 pinctrl-names = "default"; 128 pinctrl-0 = <&pinctrl_ecspi2>; 129 status = "okay"; 130 131 switch@0 { 132 compatible = "nxp,sja1105q"; 133 reg = <0>; 134 spi-max-frequency = <4000000>; 135 spi-rx-delay-us = <1>; 136 spi-tx-delay-us = <1>; 137 spi-cpha; 138 139 reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; 140 141 clocks = <&clock_sja1105>; 142 143 ports { 144 #address-cells = <1>; 145 #size-cells = <0>; 146 147 port@0 { 148 reg = <0>; 149 label = "usb"; 150 phy-handle = <&usbeth_phy>; 151 phy-mode = "rmii"; 152 }; 153 154 port@1 { 155 reg = <1>; 156 label = "t1slave"; 157 phy-handle = <&tja1102_phy1>; 158 phy-mode = "rmii"; 159 }; 160 161 port@2 { 162 reg = <2>; 163 label = "t1master"; 164 phy-handle = <&tja1102_phy0>; 165 phy-mode = "rmii"; 166 167 }; 168 169 port@3 { 170 reg = <3>; 171 label = "rj45"; 172 phy-handle = <&rgmii_phy>; 173 phy-mode = "rgmii-id"; 174 }; 175 176 port@4 { 177 reg = <4>; 178 label = "cpu"; 179 ethernet = <&fec>; 180 phy-mode = "rgmii-id"; 181 rx-internal-delay-ps = <2000>; 182 tx-internal-delay-ps = <2000>; 183 184 fixed-link { 185 speed = <100>; 186 full-duplex; 187 }; 188 }; 189 }; 190 }; 191}; 192 193&ecspi3 { 194 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 195 pinctrl-names = "default"; 196 pinctrl-0 = <&pinctrl_ecspi3>; 197 status = "okay"; 198 199 can@0 { 200 compatible = "microchip,mcp251xfd"; 201 pinctrl-names = "default"; 202 pinctrl-0 = <&pinctrl_can2>; 203 reg = <0>; 204 clocks = <&clock_mcp251xfd>; 205 spi-max-frequency = <10000000>; 206 interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; 207 }; 208}; 209 210&fec { 211 pinctrl-names = "default"; 212 pinctrl-0 = <&pinctrl_enet>; 213 assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>; 214 assigned-clock-rates = <125000000>; 215 status = "okay"; 216 217 phy-mode = "rgmii"; 218 219 fixed-link { 220 speed = <100>; 221 full-duplex; 222 }; 223 224 mdio { 225 #address-cells = <1>; 226 #size-cells = <0>; 227 228 /* Microchip KSZ9031 */ 229 rgmii_phy: ethernet-phy@2 { 230 reg = <2>; 231 232 interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>; 233 reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; 234 reset-assert-us = <10000>; 235 reset-deassert-us = <1000>; 236 237 clocks = <&clock_ksz9031>; 238 }; 239 }; 240}; 241 242&gpio1 { 243 gpio-line-names = 244 "", "SD1_CD", "", "", "", "", "", "", 245 "", "", "", "", "", "", "", "", 246 "", "", "", "", "", "", "", "", 247 "", "PHY3_RESET", "", "", "PHY3_INT", "", "", ""; 248}; 249 250&gpio2 { 251 gpio-line-names = 252 "", "", "", "", "", "", "", "", 253 "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "BOARD_ID3", 254 "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", 255 "", "", "", "", "", "", "", "", 256 "", "", "ECSPI2_SS0", "", "", "", "", ""; 257}; 258 259&gpio3 { 260 gpio-line-names = 261 "", "", "", "", "", "", "", "", 262 "", "", "", "", "", "", "", "", 263 "", "", "", "", "", "USB_OTG_OC", "USB_OTG_PWR", "", 264 "", "", "", "", "", "", "", ""; 265}; 266 267&gpio4 { 268 gpio-line-names = 269 "", "", "", "", "", "", "", "", 270 "", "", "", "", "CAN1_SR", "CAN2_SR", "", "", 271 "", "", "", "", "", "", "", "", 272 "ECSPI3_SS0", "CANFD_INT", "USB_ETH_RESET", "", "", "", "", ""; 273}; 274 275&gpio5 { 276 gpio-line-names = 277 "", "", "", "", "", "SW_RESET", "", "", 278 "PHY12_INT", "PHY12_RESET", "PHY12_EN", "PHY0_RESET", 279 "PHY0_INT", "", "", "", 280 "", "", "DISP1_EN", "DISP1_LR", "DISP1_TS_IRQ", "LVDS1_PD", 281 "", "", 282 "", "LVDS1_INT", "", "", "DISP0_LR", "DISP0_TS_IRQ", 283 "DISP0_EN", "CAM_GPIO0"; 284}; 285 286&gpio6 { 287 gpio-line-names = 288 "LVDS0_INT", "LVDS0_PD", "CAM_INT", "CAM_GPIO1", "CAM_PD", 289 "CAM_LOCK", "", "POWER_TG", 290 "POWER_VSEL", "", "WLAN_REG_ON", "USB_ETH_CHG", "", "", 291 "USB_ETH_CHG_ID0", "USB_ETH_CHG_ID1", 292 "USB_ETH_CHG_ID2", "", "", "", "", "", "", "", 293 "", "", "", "", "", "", "", ""; 294}; 295 296&i2c1 { 297 clock-frequency = <100000>; 298 pinctrl-names = "default"; 299 pinctrl-0 = <&pinctrl_i2c1>; 300 status = "okay"; 301 302 /* additional i2c devices are added automatically by the boot loader */ 303}; 304 305&i2c3 { 306 adc@49 { 307 compatible = "ti,ads1015"; 308 reg = <0x49>; 309 #address-cells = <1>; 310 #size-cells = <0>; 311 312 /* VIN */ 313 channel@4 { 314 reg = <4>; 315 ti,gain = <1>; 316 ti,datarate = <3>; 317 }; 318 319 /* VBUS */ 320 channel@5 { 321 reg = <5>; 322 ti,gain = <1>; 323 ti,datarate = <3>; 324 }; 325 326 /* ICHG */ 327 channel@6 { 328 reg = <6>; 329 ti,gain = <1>; 330 ti,datarate = <3>; 331 }; 332 333 channel@7 { 334 reg = <7>; 335 ti,gain = <1>; 336 ti,datarate = <3>; 337 }; 338 }; 339}; 340 341&uart4 { 342 pinctrl-names = "default"; 343 pinctrl-0 = <&pinctrl_uart4>; 344 status = "okay"; 345}; 346 347&usbotg { 348 vbus-supply = <®_otg_vbus>; 349 pinctrl-names = "default"; 350 pinctrl-0 = <&pinctrl_usbotg>; 351 phy_type = "utmi"; 352 dr_mode = "host"; 353 disable-over-current; 354 status = "okay"; 355}; 356 357&usbphynop1 { 358 status = "disabled"; 359}; 360 361&usbphynop2 { 362 status = "disabled"; 363}; 364 365&usdhc1 { 366 pinctrl-names = "default"; 367 pinctrl-0 = <&pinctrl_usdhc1>; 368 cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; 369 no-1-8-v; 370 disable-wp; 371 cap-sd-highspeed; 372 no-mmc; 373 no-sdio; 374 status = "okay"; 375}; 376 377&usdhc2 { 378 pinctrl-names = "default"; 379 pinctrl-0 = <&pinctrl_usdhc2>; 380 no-1-8-v; 381 non-removable; 382 mmc-pwrseq = <&usdhc2_wifi_pwrseq>; 383 status = "okay"; 384 #address-cells = <1>; 385 #size-cells = <0>; 386 387 brcmf: bcrmf@1 { 388 reg = <1>; 389 compatible = "brcm,bcm4329-fmac"; 390 }; 391}; 392 393&usdhc3 { 394 pinctrl-names = "default"; 395 pinctrl-0 = <&pinctrl_usdhc3>; 396 bus-width = <8>; 397 no-1-8-v; 398 non-removable; 399 no-sd; 400 no-sdio; 401 status = "okay"; 402}; 403 404&iomuxc { 405 pinctrl_can1: can1grp { 406 fsl,pins = < 407 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 408 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 409 /* CAN1_SR */ 410 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 411 >; 412 }; 413 414 pinctrl_can2: can2grp { 415 fsl,pins = < 416 /* CAN2_nINT */ 417 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1 418 /* CAN2_SR */ 419 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070 420 >; 421 }; 422 423 pinctrl_ecspi2: ecspi2grp { 424 fsl,pins = < 425 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 426 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 427 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 428 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 429 >; 430 }; 431 432 pinctrl_ecspi3: ecspi3grp { 433 fsl,pins = < 434 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 435 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 436 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 437 /* CS */ 438 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 439 >; 440 }; 441 442 pinctrl_enet: enetgrp { 443 fsl,pins = < 444 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 445 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 446 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 447 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 448 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 449 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 450 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 451 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 452 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 453 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 454 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 455 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 456 457 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 458 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 459 460 /* Configure clock provider for RGMII ref clock */ 461 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 462 /* Configure clock consumer for RGMII ref clock */ 463 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 464 465 /* SJA1105Q switch reset */ 466 MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x10030 467 468 /* phy3/rgmii_phy reset */ 469 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x10030 470 /* phy3/rgmii_phy int */ 471 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x40010000 472 >; 473 }; 474 475 pinctrl_i2c1: i2c1grp { 476 fsl,pins = < 477 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 478 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 479 >; 480 }; 481 482 pinctrl_mdio: mdiogrp { 483 fsl,pins = < 484 /* phy0/usbeth_phy reset */ 485 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x10030 486 /* phy0/usbeth_phy int */ 487 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 488 489 /* phy12/tja1102_phy0 reset */ 490 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x10030 491 /* phy12/tja1102_phy0 int */ 492 MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x100b1 493 /* phy12/tja1102_phy0 enable. Set 100K pull-up */ 494 MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1f030 495 >; 496 }; 497 498 pinctrl_uart4: uart4grp { 499 fsl,pins = < 500 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 501 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 502 >; 503 }; 504 505 pinctrl_usbotg: usbotggrp { 506 fsl,pins = < 507 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 508 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 509 >; 510 }; 511 512 pinctrl_usdhc1: usdhc1grp { 513 fsl,pins = < 514 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 515 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 516 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 517 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 518 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 519 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 520 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 521 >; 522 }; 523 524 pinctrl_usdhc2: usdhc2grp { 525 fsl,pins = < 526 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 527 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 528 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 529 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 530 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 531 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 532 >; 533 }; 534 535 pinctrl_usdhc3: usdhc3grp { 536 fsl,pins = < 537 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 538 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 539 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 540 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 541 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 542 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 543 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 544 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 545 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 546 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 547 MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 548 >; 549 }; 550 551 pinctrl_wifi_npd: wifinpd { 552 fsl,pins = < 553 /* WL_REG_ON */ 554 MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 555 >; 556 }; 557};