imx6ul-kontron-n6x1x-s.dtsi (8962B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2017 exceet electronics GmbH 4 * Copyright (C) 2018 Kontron Electronics GmbH 5 * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9 10/ { 11 gpio-leds { 12 compatible = "gpio-leds"; 13 pinctrl-names = "default"; 14 pinctrl-0 = <&pinctrl_gpio_leds>; 15 16 led1 { 17 label = "debug-led1"; 18 gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; 19 default-state = "off"; 20 linux,default-trigger = "heartbeat"; 21 }; 22 23 led2 { 24 label = "debug-led2"; 25 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; 26 default-state = "off"; 27 }; 28 29 led3 { 30 label = "debug-led3"; 31 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; 32 default-state = "off"; 33 }; 34 }; 35 36 pwm-beeper { 37 compatible = "pwm-beeper"; 38 pwms = <&pwm8 0 5000>; 39 }; 40 41 reg_3v3: regulator-3v3 { 42 compatible = "regulator-fixed"; 43 regulator-name = "3v3"; 44 regulator-min-microvolt = <3300000>; 45 regulator-max-microvolt = <3300000>; 46 }; 47 48 reg_5v: regulator-5v { 49 compatible = "regulator-fixed"; 50 regulator-name = "5v"; 51 regulator-min-microvolt = <5000000>; 52 regulator-max-microvolt = <5000000>; 53 }; 54 55 reg_usb_otg1_vbus: regulator-usb-otg1-vbus { 56 compatible = "regulator-fixed"; 57 regulator-name = "usb_otg1_vbus"; 58 regulator-min-microvolt = <5000000>; 59 regulator-max-microvolt = <5000000>; 60 gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; 61 enable-active-high; 62 }; 63 64 reg_vref_adc: regulator-vref-adc { 65 compatible = "regulator-fixed"; 66 regulator-name = "vref-adc"; 67 regulator-min-microvolt = <3300000>; 68 regulator-max-microvolt = <3300000>; 69 }; 70}; 71 72&adc1 { 73 pinctrl-names = "default"; 74 pinctrl-0 = <&pinctrl_adc1>; 75 num-channels = <3>; 76 vref-supply = <®_vref_adc>; 77 status = "okay"; 78}; 79 80&can2 { 81 pinctrl-names = "default"; 82 pinctrl-0 = <&pinctrl_flexcan2>; 83 status = "okay"; 84}; 85 86&ecspi1 { 87 cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; 88 pinctrl-names = "default"; 89 pinctrl-0 = <&pinctrl_ecspi1>; 90 status = "okay"; 91 92 eeprom@0 { 93 compatible = "anvo,anv32e61w", "atmel,at25"; 94 reg = <0>; 95 spi-max-frequency = <20000000>; 96 spi-cpha; 97 spi-cpol; 98 pagesize = <1>; 99 size = <8192>; 100 address-width = <16>; 101 }; 102}; 103 104&fec1 { 105 pinctrl-0 = <&pinctrl_enet1>; 106 /delete-node/ mdio; 107}; 108 109&fec2 { 110 pinctrl-names = "default"; 111 pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; 112 phy-mode = "rmii"; 113 phy-handle = <ðphy2>; 114 status = "okay"; 115 116 mdio { 117 #address-cells = <1>; 118 #size-cells = <0>; 119 120 ethphy1: ethernet-phy@1 { 121 reg = <1>; 122 micrel,led-mode = <0>; 123 clocks = <&clks IMX6UL_CLK_ENET_REF>; 124 clock-names = "rmii-ref"; 125 }; 126 127 ethphy2: ethernet-phy@2 { 128 reg = <2>; 129 micrel,led-mode = <0>; 130 clocks = <&clks IMX6UL_CLK_ENET2_REF>; 131 clock-names = "rmii-ref"; 132 }; 133 }; 134}; 135 136&i2c1 { 137 clock-frequency = <100000>; 138 pinctrl-names = "default"; 139 pinctrl-0 = <&pinctrl_i2c1>; 140 status = "okay"; 141}; 142 143&i2c4 { 144 clock-frequency = <100000>; 145 pinctrl-names = "default"; 146 pinctrl-0 = <&pinctrl_i2c4>; 147 status = "okay"; 148 149 rtc@32 { 150 compatible = "epson,rx8900"; 151 reg = <0x32>; 152 }; 153}; 154 155&pwm8 { 156 #pwm-cells = <2>; 157 pinctrl-names = "default"; 158 pinctrl-0 = <&pinctrl_pwm8>; 159 status = "okay"; 160}; 161 162&uart1 { 163 pinctrl-names = "default"; 164 pinctrl-0 = <&pinctrl_uart1>; 165 status = "okay"; 166}; 167 168&uart2 { 169 pinctrl-names = "default"; 170 pinctrl-0 = <&pinctrl_uart2>; 171 linux,rs485-enabled-at-boot-time; 172 rs485-rx-during-tx; 173 rs485-rts-active-low; 174 uart-has-rtscts; 175 status = "okay"; 176}; 177 178&uart3 { 179 pinctrl-names = "default"; 180 pinctrl-0 = <&pinctrl_uart3>; 181 uart-has-rtscts; 182 status = "okay"; 183}; 184 185&uart4 { 186 pinctrl-names = "default"; 187 pinctrl-0 = <&pinctrl_uart4>; 188 status = "okay"; 189}; 190 191&usbotg1 { 192 pinctrl-names = "default"; 193 pinctrl-0 = <&pinctrl_usbotg1>; 194 dr_mode = "otg"; 195 srp-disable; 196 hnp-disable; 197 adp-disable; 198 over-current-active-low; 199 vbus-supply = <®_usb_otg1_vbus>; 200 status = "okay"; 201}; 202 203&usbotg2 { 204 dr_mode = "host"; 205 disable-over-current; 206 vbus-supply = <®_5v>; 207 status = "okay"; 208}; 209 210&usdhc1 { 211 pinctrl-names = "default"; 212 pinctrl-0 = <&pinctrl_usdhc1>; 213 cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; 214 keep-power-in-suspend; 215 wakeup-source; 216 vmmc-supply = <®_3v3>; 217 voltage-ranges = <3300 3300>; 218 no-1-8-v; 219 status = "okay"; 220}; 221 222&usdhc2 { 223 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 224 pinctrl-0 = <&pinctrl_usdhc2>; 225 pinctrl-1 = <&pinctrl_usdhc2_100mhz>; 226 pinctrl-2 = <&pinctrl_usdhc2_200mhz>; 227 non-removable; 228 keep-power-in-suspend; 229 wakeup-source; 230 vmmc-supply = <®_3v3>; 231 voltage-ranges = <3300 3300>; 232 no-1-8-v; 233 status = "okay"; 234}; 235 236&iomuxc { 237 pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; 238 239 pinctrl_adc1: adc1grp { 240 fsl,pins = < 241 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 242 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 243 MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 244 >; 245 }; 246 247 pinctrl_ecspi1: ecspi1grp { 248 fsl,pins = < 249 MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 250 MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 251 MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 252 MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ 253 >; 254 }; 255 256 pinctrl_enet2: enet2grp { 257 fsl,pins = < 258 MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 259 MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 260 MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 261 MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 262 MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 263 MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 264 MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 265 MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 266 >; 267 }; 268 269 pinctrl_enet2_mdio: enet2mdiogrp { 270 fsl,pins = < 271 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 272 MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 273 >; 274 }; 275 276 pinctrl_flexcan2: flexcan2grp{ 277 fsl,pins = < 278 MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 279 MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 280 >; 281 }; 282 283 pinctrl_gpio: gpiogrp { 284 fsl,pins = < 285 MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ 286 MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ 287 MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ 288 MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ 289 >; 290 }; 291 292 pinctrl_gpio_leds: gpioledsgrp { 293 fsl,pins = < 294 MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ 295 MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ 296 MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ 297 >; 298 }; 299 300 pinctrl_i2c1: i2c1grp { 301 fsl,pins = < 302 MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 303 MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 304 >; 305 }; 306 307 pinctrl_i2c4: i2c4grp { 308 fsl,pins = < 309 MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 310 MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 311 >; 312 }; 313 314 pinctrl_pwm8: pwm8grp { 315 fsl,pins = < 316 MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 317 >; 318 }; 319 320 pinctrl_uart1: uart1grp { 321 fsl,pins = < 322 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 323 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 324 >; 325 }; 326 327 pinctrl_uart2: uart2grp { 328 fsl,pins = < 329 MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 330 MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 331 MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 332 /* 333 * mux unused RTS to make sure it doesn't cause 334 * any interrupts when it is undefined 335 */ 336 MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 337 >; 338 }; 339 340 pinctrl_uart3: uart3grp { 341 fsl,pins = < 342 MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 343 MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 344 MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 345 MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 346 >; 347 }; 348 349 pinctrl_uart4: uart4grp { 350 fsl,pins = < 351 MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 352 MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 353 >; 354 }; 355 356 pinctrl_usbotg1: usbotg1 { 357 fsl,pins = < 358 MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 359 >; 360 }; 361 362 pinctrl_usdhc1: usdhc1grp { 363 fsl,pins = < 364 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 365 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 366 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 367 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 368 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 369 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 370 MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ 371 >; 372 }; 373 374 pinctrl_usdhc2: usdhc2grp { 375 fsl,pins = < 376 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 377 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 378 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 379 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 380 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 381 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 382 >; 383 }; 384 385 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { 386 fsl,pins = < 387 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 388 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 389 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 390 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 391 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 392 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 393 >; 394 }; 395 396 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { 397 fsl,pins = < 398 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 399 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 400 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 401 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 402 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 403 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 404 >; 405 }; 406};