imx7d-cl-som-imx7.dts (7000B)
1/* 2 * Support for CompuLab CL-SOM-iMX7 System-on-Module 3 * 4 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ 5 * Author: Ilya Ledvich <ilya@compulab.co.il> 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 */ 12 13/dts-v1/; 14 15#include "imx7d.dtsi" 16 17/ { 18 model = "CompuLab CL-SOM-iMX7"; 19 compatible = "compulab,cl-som-imx7", "fsl,imx7d"; 20 21 memory@80000000 { 22 device_type = "memory"; 23 reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ 24 }; 25 26 reg_usb_otg1_vbus: regulator-vbus { 27 compatible = "regulator-fixed"; 28 regulator-name = "usb_otg1_vbus"; 29 regulator-min-microvolt = <5000000>; 30 regulator-max-microvolt = <5000000>; 31 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; 32 enable-active-high; 33 }; 34}; 35 36&cpu0 { 37 cpu-supply = <&sw1a_reg>; 38}; 39 40&cpu1 { 41 cpu-supply = <&sw1a_reg>; 42}; 43 44&fec1 { 45 pinctrl-names = "default"; 46 pinctrl-0 = <&pinctrl_enet1>; 47 assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, 48 <&clks IMX7D_ENET1_TIME_ROOT_CLK>; 49 assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; 50 assigned-clock-rates = <0>, <100000000>; 51 phy-mode = "rgmii-id"; 52 phy-handle = <ðphy0>; 53 fsl,magic-packet; 54 status = "okay"; 55 56 mdio { 57 #address-cells = <1>; 58 #size-cells = <0>; 59 60 ethphy0: ethernet-phy@0 { 61 compatible = "ethernet-phy-ieee802.3-c22"; 62 reg = <0>; 63 }; 64 65 ethphy1: ethernet-phy@1 { 66 compatible = "ethernet-phy-ieee802.3-c22"; 67 reg = <1>; 68 }; 69 }; 70}; 71 72&fec2 { 73 pinctrl-names = "default"; 74 pinctrl-0 = <&pinctrl_enet2>; 75 assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, 76 <&clks IMX7D_ENET2_TIME_ROOT_CLK>; 77 assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; 78 assigned-clock-rates = <0>, <100000000>; 79 phy-mode = "rgmii-id"; 80 phy-handle = <ðphy1>; 81 fsl,magic-packet; 82 status = "okay"; 83}; 84 85&i2c2 { 86 pinctrl-names = "default"; 87 pinctrl-0 = <&pinctrl_i2c2>; 88 status = "okay"; 89 90 pmic: pmic@8 { 91 compatible = "fsl,pfuze3000"; 92 reg = <0x8>; 93 94 regulators { 95 sw1a_reg: sw1a { 96 regulator-min-microvolt = <700000>; 97 regulator-max-microvolt = <3300000>; 98 regulator-boot-on; 99 regulator-always-on; 100 regulator-ramp-delay = <6250>; 101 }; 102 103 /* use sw1c_reg to align with pfuze100/pfuze200 */ 104 sw1c_reg: sw1b { 105 regulator-min-microvolt = <700000>; 106 regulator-max-microvolt = <1475000>; 107 regulator-boot-on; 108 regulator-always-on; 109 regulator-ramp-delay = <6250>; 110 }; 111 112 sw2_reg: sw2 { 113 regulator-min-microvolt = <1500000>; 114 regulator-max-microvolt = <1850000>; 115 regulator-boot-on; 116 regulator-always-on; 117 }; 118 119 sw3a_reg: sw3 { 120 regulator-min-microvolt = <900000>; 121 regulator-max-microvolt = <1650000>; 122 regulator-boot-on; 123 regulator-always-on; 124 }; 125 126 swbst_reg: swbst { 127 regulator-min-microvolt = <5000000>; 128 regulator-max-microvolt = <5150000>; 129 }; 130 131 snvs_reg: vsnvs { 132 regulator-min-microvolt = <1000000>; 133 regulator-max-microvolt = <3000000>; 134 regulator-boot-on; 135 regulator-always-on; 136 }; 137 138 vref_reg: vrefddr { 139 regulator-boot-on; 140 regulator-always-on; 141 }; 142 143 vgen1_reg: vldo1 { 144 regulator-min-microvolt = <1800000>; 145 regulator-max-microvolt = <3300000>; 146 regulator-always-on; 147 }; 148 149 vgen2_reg: vldo2 { 150 regulator-min-microvolt = <800000>; 151 regulator-max-microvolt = <1550000>; 152 }; 153 154 vgen3_reg: vccsd { 155 regulator-min-microvolt = <2850000>; 156 regulator-max-microvolt = <3300000>; 157 regulator-always-on; 158 }; 159 160 vgen4_reg: v33 { 161 regulator-min-microvolt = <2850000>; 162 regulator-max-microvolt = <3300000>; 163 regulator-always-on; 164 }; 165 166 vgen5_reg: vldo3 { 167 regulator-min-microvolt = <1800000>; 168 regulator-max-microvolt = <3300000>; 169 regulator-always-on; 170 }; 171 172 vgen6_reg: vldo4 { 173 regulator-min-microvolt = <1800000>; 174 regulator-max-microvolt = <3300000>; 175 regulator-always-on; 176 }; 177 }; 178 }; 179 180 pca9555: pca9555@20 { 181 compatible = "nxp,pca9555"; 182 gpio-controller; 183 #gpio-cells = <2>; 184 reg = <0x20>; 185 }; 186 187 eeprom@50 { 188 compatible = "atmel,24c08"; 189 reg = <0x50>; 190 pagesize = <16>; 191 }; 192}; 193 194&uart1 { 195 pinctrl-names = "default"; 196 pinctrl-0 = <&pinctrl_uart1>; 197 assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; 198 assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; 199 status = "okay"; 200}; 201 202&usbotg1 { 203 pinctrl-names = "default"; 204 pinctrl-0 = <&pinctrl_usbotg1>; 205 vbus-supply = <®_usb_otg1_vbus>; 206 status = "okay"; 207}; 208 209&usdhc3 { 210 pinctrl-names = "default"; 211 pinctrl-0 = <&pinctrl_usdhc3>; 212 assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; 213 assigned-clock-rates = <400000000>; 214 bus-width = <8>; 215 fsl,tuning-step = <2>; 216 non-removable; 217 status = "okay"; 218}; 219 220&iomuxc { 221 pinctrl_enet1: enet1grp { 222 fsl,pins = < 223 MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x30 224 MX7D_PAD_SD2_WP__ENET1_MDC 0x30 225 MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x11 226 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x11 227 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x11 228 MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x11 229 MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x11 230 MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x11 231 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x11 232 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11 233 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11 234 MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11 235 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x11 236 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11 237 >; 238 }; 239 240 pinctrl_enet2: enet2grp { 241 fsl,pins = < 242 MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x11 243 MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x11 244 MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x11 245 MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x11 246 MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x11 247 MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x11 248 MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x11 249 MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x11 250 MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x11 251 MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x11 252 MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x11 253 MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x11 254 >; 255 }; 256 257 pinctrl_i2c2: i2c2grp { 258 fsl,pins = < 259 MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f 260 MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f 261 >; 262 }; 263 264 pinctrl_uart1: uart1grp { 265 fsl,pins = < 266 MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 267 MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 268 >; 269 }; 270 271 pinctrl_usdhc3: usdhc3grp { 272 fsl,pins = < 273 MX7D_PAD_SD3_CMD__SD3_CMD 0x59 274 MX7D_PAD_SD3_CLK__SD3_CLK 0x19 275 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 276 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 277 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 278 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 279 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 280 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 281 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 282 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 283 MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 284 >; 285 }; 286}; 287 288&iomuxc_lpsr { 289 pinctrl_usbotg1: usbotg1grp { 290 fsl,pins = < 291 MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ 292 >; 293 }; 294};