cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

kirkwood-b3.dts (3751B)

      1// SPDX-License-Identifier: GPL-2.0+
      2/*
      3 * Device Tree file for Excito Bubba B3
      4 *
      5 * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
      6 *
      7 *
      8 * Note: This requires a new'ish version of u-boot, which disables the
      9 * L2 cache. If your B3 silently fails to boot, u-boot is probably too
     10 * old. Either upgrade, or consider the following email:
     11 *
     12 * https://lists.debian.org/debian-arm/2012/08/msg00128.html
     13 */
     14
     15/dts-v1/;
     16
     17#include "kirkwood.dtsi"
     18#include "kirkwood-6281.dtsi"
     19
     20/ {
     21	model = "Excito B3";
     22	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
     23	memory { /* 512 MB */
     24		device_type = "memory";
     25		reg = <0x00000000 0x20000000>;
     26	};
     27
     28	chosen {
     29		bootargs = "console=ttyS0,115200n8 earlyprintk";
     30		stdout-path = &uart0;
     31	};
     32
     33	ocp@f1000000 {
     34		pinctrl: pin-controller@10000 {
     35			pmx_button_power: pmx-button-power {
     36				marvell,pins = "mpp39";
     37				marvell,function = "gpio";
     38			};
     39			pmx_led_green: pmx-led-green {
     40				marvell,pins = "mpp38";
     41				marvell,function = "gpio";
     42			};
     43			pmx_led_red: pmx-led-red {
     44				marvell,pins = "mpp41";
     45				marvell,function = "gpio";
     46			};
     47			pmx_led_blue: pmx-led-blue {
     48				marvell,pins = "mpp42";
     49				marvell,function = "gpio";
     50			};
     51			pmx_beeper: pmx-beeper {
     52				marvell,pins = "mpp40";
     53				marvell,function = "gpio";
     54			};
     55		};
     56
     57		spi@10600 {
     58			status = "okay";
     59
     60			m25p16@0 {
     61				#address-cells = <1>;
     62				#size-cells = <1>;
     63				compatible = "st,m25p16", "jedec,spi-nor";
     64				reg = <0>;
     65				spi-max-frequency = <40000000>;
     66				mode = <0>;
     67
     68				partition@0 {
     69					reg = <0x0 0xc0000>;
     70					label = "u-boot";
     71				};
     72
     73				partition@c0000 {
     74					reg = <0xc0000 0x20000>;
     75					label = "u-boot env";
     76				};
     77
     78				partition@e0000 {
     79					reg = <0xe0000 0x120000>;
     80					label = "data";
     81				};
     82			};
     83		};
     84
     85		i2c@11000 {
     86			status = "okay";
     87			/*
     88			 * There is something on the bus at address 0x64.
     89			 * Not yet identified what it is, maybe the eeprom
     90			 * for the Atheros WiFi chip?
     91			 */
     92		};
     93
     94
     95		serial@12000 {
     96			/* Internal on test pins, 3.3v TTL
     97		 	 * UART0_RX = Testpoint 65
     98			 * UART0_TX = Testpoint 66
     99			 * See the Excito Wiki for more details.
    100		 	 */
    101			status = "okay";
    102		};
    103
    104		sata@80000 {
    105			/* One internal, the second as eSATA */
    106			status = "okay";
    107			nr-ports = <2>;
    108		};
    109	};
    110
    111	gpio-leds {
    112		/*
    113		 * There is one LED "port" on the front and the colours
    114		 * mix together giving some interesting combinations.
    115		 */
    116		compatible = "gpio-leds";
    117		pinctrl-0 = < &pmx_led_green &pmx_led_red
    118			      &pmx_led_blue >;
    119		pinctrl-names = "default";
    120
    121		programming_led {
    122			label = "bubba3:green:programming";
    123			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
    124			default-state = "off";
    125		};
    126
    127		error_led {
    128			label = "bubba3:red:error";
    129			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
    130		};
    131
    132		active_led {
    133			label = "bubba3:blue:active";
    134			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
    135		};
    136	};
    137
    138	gpio-keys {
    139		compatible = "gpio-keys";
    140		pinctrl-0 = <&pmx_button_power>;
    141		pinctrl-names = "default";
    142
    143		power-button {
    144			/* On the back */
    145			label = "Power Button";
    146			linux,code = <KEY_POWER>;
    147			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
    148		};
    149	};
    150
    151	beeper: beeper {
    152		/* 4KHz Piezoelectric buzzer */
    153		compatible = "gpio-beeper";
    154		pinctrl-0 = <&pmx_beeper>;
    155		pinctrl-names = "default";
    156		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
    157	};
    158};
    159
    160&mdio {
    161	status = "okay";
    162
    163	ethphy0: ethernet-phy@8 {
    164		device_type = "ethernet-phy";
    165		reg = <8>;
    166	};
    167
    168	ethphy1: ethernet-phy@24 {
    169		device_type = "ethernet-phy";
    170		reg = <24>;
    171	};
    172};
    173
    174&eth0 {
    175	status = "okay";
    176	ethernet0-port@0 {
    177		phy-handle = <&ethphy0>;
    178	};
    179};
    180
    181&eth1 {
    182	status = "okay";
    183	ethernet1-port@0 {
    184		phy-handle = <&ethphy1>;
    185	};
    186};
    187
    188/* Wifi model has Atheros chipset on pcie port */
    189&pciec {
    190        status = "okay";
    191};
    192
    193&pcie0 {
    194	status = "okay";
    195};