cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

kirkwood-dockstar.dts (2067B)

      1// SPDX-License-Identifier: GPL-2.0
      2/dts-v1/;
      3
      4#include "kirkwood.dtsi"
      5#include "kirkwood-6281.dtsi"
      6
      7/ {
      8	model = "Seagate FreeAgent Dockstar";
      9	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
     10
     11	memory {
     12		device_type = "memory";
     13		reg = <0x00000000 0x8000000>;
     14	};
     15
     16	chosen {
     17		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
     18		stdout-path = &uart0;
     19	};
     20
     21	ocp@f1000000 {
     22		pinctrl: pin-controller@10000 {
     23			pmx_usb_power_enable: pmx-usb-power-enable {
     24				marvell,pins = "mpp29";
     25				marvell,function = "gpio";
     26			};
     27			pmx_led_green: pmx-led-green {
     28				marvell,pins = "mpp46";
     29				marvell,function = "gpio";
     30			};
     31			pmx_led_orange: pmx-led-orange {
     32				marvell,pins = "mpp47";
     33				marvell,function = "gpio";
     34			};
     35		};
     36		serial@12000 {
     37			status = "okay";
     38		};
     39	};
     40	gpio-leds {
     41		compatible = "gpio-leds";
     42		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
     43		pinctrl-names = "default";
     44
     45		health {
     46			label = "status:green:health";
     47			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
     48			default-state = "keep";
     49		};
     50		fault {
     51			label = "status:orange:fault";
     52			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
     53		};
     54	};
     55	regulators {
     56		compatible = "simple-bus";
     57		#address-cells = <1>;
     58		#size-cells = <0>;
     59		pinctrl-0 = <&pmx_usb_power_enable>;
     60		pinctrl-names = "default";
     61
     62		usb_power: regulator@1 {
     63			compatible = "regulator-fixed";
     64			reg = <1>;
     65			regulator-name = "USB Power";
     66			regulator-min-microvolt = <5000000>;
     67			regulator-max-microvolt = <5000000>;
     68			enable-active-high;
     69			regulator-always-on;
     70			regulator-boot-on;
     71			gpio = <&gpio0 29 0>;
     72		};
     73	};
     74};
     75
     76&nand {
     77	status = "okay";
     78
     79	partition@0 {
     80		label = "u-boot";
     81		reg = <0x0000000 0x100000>;
     82		read-only;
     83	};
     84
     85	partition@100000 {
     86		label = "uImage";
     87		reg = <0x0100000 0x400000>;
     88	};
     89
     90	partition@500000 {
     91		label = "data";
     92		reg = <0x0500000 0xfb00000>;
     93	};
     94};
     95
     96&mdio {
     97	status = "okay";
     98
     99	ethphy0: ethernet-phy@0 {
    100		compatible = "marvell,88e1116";
    101		reg = <0>;
    102	};
    103};
    104
    105&eth0 {
    106	status = "okay";
    107	ethernet0-port@0 {
    108		phy-handle = <&ethphy0>;
    109	};
    110};