cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

kirkwood-l-50.dts (7209B)

      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Check Point L-50 Board Description
      4 * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
      5 */
      6
      7/dts-v1/;
      8
      9#include "kirkwood.dtsi"
     10#include "kirkwood-6281.dtsi"
     11
     12/ {
     13	model = "Check Point L-50";
     14	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
     15
     16	memory {
     17		device_type = "memory";
     18		reg = <0x00000000 0x20000000>;
     19	};
     20
     21	chosen {
     22		bootargs = "console=ttyS0,115200n8";
     23		stdout-path = &uart0;
     24	};
     25
     26	ocp@f1000000 {
     27		pinctrl: pin-controller@10000 {
     28			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
     29			pinctrl-names = "default";
     30
     31			pmx_sysrst: pmx-sysrst {
     32				marvell,pins = "mpp6";
     33				marvell,function = "sysrst";
     34			};
     35
     36			pmx_button29: pmx_button29 {
     37				marvell,pins = "mpp29";
     38				marvell,function = "gpio";
     39			};
     40
     41			pmx_led38: pmx_led38 {
     42				marvell,pins = "mpp38";
     43				marvell,function = "gpio";
     44			};
     45
     46			pmx_sdio_cd: pmx-sdio-cd {
     47				marvell,pins = "mpp46";
     48				marvell,function = "gpio";
     49			};
     50		};
     51
     52		serial@12000 {
     53			status = "okay";
     54		};
     55
     56		mvsdio@90000 {
     57			status = "okay";
     58			cd-gpios = <&gpio1 14 9>;
     59		};
     60
     61		i2c@11000 {
     62			status = "okay";
     63			clock-frequency = <400000>;
     64
     65			gpio2: gpio-expander@20{
     66				#gpio-cells = <2>;
     67				#interrupt-cells = <2>;
     68				compatible = "semtech,sx1505q";
     69				reg = <0x20>;
     70
     71				gpio-controller;
     72			};
     73
     74			/* Three GPIOs from 0x21 exp. are undescribed in dts:
     75			 * 1: DSL module reset (active low)
     76			 * 5: mPCIE reset (active low)
     77			 * 6: Express card reset (active low)
     78			 */
     79			gpio3: gpio-expander@21{
     80				#gpio-cells = <2>;
     81				#interrupt-cells = <2>;
     82				compatible = "semtech,sx1505q";
     83				reg = <0x21>;
     84
     85				gpio-controller;
     86			};
     87
     88			rtc@30 {
     89				compatible = "s35390a";
     90				reg = <0x30>;
     91			};
     92		};
     93	};
     94
     95	leds {
     96		compatible = "gpio-leds";
     97
     98		status_green {
     99			label = "l-50:green:status";
    100			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
    101		};
    102
    103		status_red {
    104			label = "l-50:red:status";
    105			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
    106		};
    107
    108		wifi {
    109			label = "l-50:green:wifi";
    110			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
    111			linux,default-trigger = "phy0tpt";
    112		};
    113
    114		internet_green {
    115			label = "l-50:green:internet";
    116			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
    117		};
    118
    119		internet_red {
    120			label = "l-50:red:internet";
    121			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
    122		};
    123
    124		usb1_green {
    125			label = "l-50:green:usb1";
    126			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
    127			linux,default-trigger = "usbport";
    128			trigger-sources = <&hub_port3>;
    129		};
    130
    131		usb1_red {
    132			label = "l-50:red:usb1";
    133			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
    134		};
    135
    136		usb2_green {
    137			label = "l-50:green:usb2";
    138			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
    139			linux,default-trigger = "usbport";
    140			trigger-sources = <&hub_port1>;
    141		};
    142
    143		usb2_red {
    144			label = "l-50:red:usb2";
    145			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
    146		};
    147	};
    148
    149	usb2_pwr {
    150		compatible = "regulator-fixed";
    151		regulator-name = "usb2_pwr";
    152
    153		regulator-min-microvolt = <5000000>;
    154		regulator-max-microvolt = <5000000>;
    155		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
    156		regulator-always-on;
    157	};
    158
    159	usb1_pwr {
    160		compatible = "regulator-fixed";
    161		regulator-name = "usb1_pwr";
    162
    163		regulator-min-microvolt = <5000000>;
    164		regulator-max-microvolt = <5000000>;
    165		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
    166		regulator-always-on;
    167	};
    168
    169	mpcie_pwr {
    170		compatible = "regulator-fixed";
    171		regulator-name = "mpcie_pwr";
    172
    173		regulator-min-microvolt = <3300000>;
    174		regulator-max-microvolt = <3300000>;
    175		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
    176		enable-active-high;
    177		regulator-always-on;
    178	};
    179
    180	express_card_pwr {
    181		compatible = "regulator-fixed";
    182		regulator-name = "express_card_pwr";
    183
    184		regulator-min-microvolt = <3300000>;
    185		regulator-max-microvolt = <3300000>;
    186		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
    187		enable-active-high;
    188		regulator-always-on;
    189	};
    190
    191	keys {
    192		compatible = "gpio-keys";
    193
    194		factory_defaults {
    195			label = "factory_defaults";
    196			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
    197			linux,code = <KEY_RESTART>;
    198		};
    199	};
    200};
    201
    202&mdio {
    203	status = "okay";
    204
    205	ethphy8: ethernet-phy@8 {
    206		reg = <0x08>;
    207	};
    208
    209	switch0: switch@10 {
    210		compatible = "marvell,mv88e6085";
    211		#address-cells = <1>;
    212		#size-cells = <0>;
    213		reg = <0x10>;
    214		dsa,member = <0 0>;
    215
    216		ports {
    217			#address-cells = <1>;
    218			#size-cells = <0>;
    219
    220			port@0 {
    221				reg = <0>;
    222				label = "lan5";
    223			};
    224
    225			port@1 {
    226			       reg = <1>;
    227			       label = "lan1";
    228			};
    229
    230			port@2 {
    231			       reg = <2>;
    232			       label = "lan6";
    233			};
    234
    235			port@3 {
    236			       reg = <3>;
    237			       label = "lan2";
    238			};
    239
    240			port@4 {
    241				reg = <4>;
    242				label = "lan7";
    243			};
    244
    245			switch0port5: port@5 {
    246				reg = <5>;
    247				phy-mode = "rgmii-txid";
    248				link = <&switch1port5>;
    249				fixed-link {
    250					speed = <1000>;
    251					full-duplex;
    252				};
    253			};
    254
    255			port@6 {
    256				reg = <6>;
    257				label = "cpu";
    258				phy-mode = "rgmii-id";
    259				ethernet = <&eth1port>;
    260				fixed-link {
    261					speed = <1000>;
    262					full-duplex;
    263				};
    264			};
    265		};
    266	};
    267
    268	switch@11 {
    269		compatible = "marvell,mv88e6085";
    270		#address-cells = <1>;
    271		#size-cells = <0>;
    272		reg = <0x11>;
    273		dsa,member = <0 1>;
    274
    275		ports {
    276			#address-cells = <1>;
    277			#size-cells = <0>;
    278
    279			port@0 {
    280				reg = <0>;
    281				label = "lan3";
    282			};
    283
    284			port@1 {
    285			       reg = <1>;
    286			       label = "lan8";
    287			};
    288
    289			port@2 {
    290			       reg = <2>;
    291			       label = "lan4";
    292			};
    293
    294			port@3 {
    295			       reg = <3>;
    296			       label = "dmz";
    297			};
    298
    299			switch1port5: port@5 {
    300				reg = <5>;
    301				phy-mode = "rgmii-txid";
    302				link = <&switch0port5>;
    303				fixed-link {
    304					speed = <1000>;
    305					full-duplex;
    306				};
    307			};
    308
    309			port@6 {
    310				reg = <6>;
    311				label = "dsl";
    312				fixed-link {
    313					speed = <100>;
    314					full-duplex;
    315				};
    316			};
    317		};
    318	};
    319};
    320
    321&eth0 {
    322	status = "okay";
    323	ethernet0-port@0 {
    324		phy-handle = <&ethphy8>;
    325	};
    326};
    327
    328&eth1 {
    329	status = "okay";
    330	ethernet1-port@0 {
    331		speed = <1000>;
    332		duplex = <1>;
    333	};
    334};
    335
    336&nand {
    337	status = "okay";
    338	pinctrl-0 = <&pmx_nand>;
    339	pinctrl-names = "default";
    340
    341	partition@0 {
    342		label = "u-boot";
    343		reg = <0x00000000 0x000c0000>;
    344	};
    345
    346	partition@a0000 {
    347		label = "bootldr-env";
    348		reg = <0x000c0000 0x00040000>;
    349	};
    350
    351	partition@100000 {
    352		label = "kernel-1";
    353		reg = <0x00100000 0x00800000>;
    354	};
    355
    356	partition@900000 {
    357		label = "rootfs-1";
    358		reg = <0x00900000 0x07100000>;
    359	};
    360
    361	partition@7a00000 {
    362		label = "kernel-2";
    363		reg = <0x07a00000 0x00800000>;
    364	};
    365
    366	partition@8200000 {
    367		label = "rootfs-2";
    368		reg = <0x08200000 0x07100000>;
    369	};
    370
    371	partition@f300000 {
    372		label = "default_sw";
    373		reg = <0x0f300000 0x07900000>;
    374	};
    375
    376	partition@16c00000 {
    377		label = "logs";
    378		reg = <0x16c00000 0x01800000>;
    379	};
    380
    381	partition@18400000 {
    382		label = "preset_cfg";
    383		reg = <0x18400000 0x00100000>;
    384	};
    385
    386	partition@18500000 {
    387		label = "adsl";
    388		reg = <0x18500000 0x00100000>;
    389	};
    390
    391	partition@18600000 {
    392		label = "storage";
    393		reg = <0x18600000 0x07a00000>;
    394	};
    395};
    396
    397&rtc {
    398	status = "disabled";
    399};
    400
    401&pciec {
    402	status = "okay";
    403};
    404
    405&pcie0 {
    406	status = "okay";
    407};
    408
    409&sata_phy0 {
    410	status = "disabled";
    411};
    412
    413&sata_phy1 {
    414	status = "disabled";
    415};
    416
    417&usb0 {
    418	#address-cells = <1>;
    419	#size-cells = <0>;
    420	status = "okay";
    421
    422	port@1 {
    423		#address-cells = <1>;
    424		#size-cells = <0>;
    425		reg = <1>;
    426		#trigger-source-cells = <0>;
    427
    428		hub_port1: port@1 {
    429			reg = <1>;
    430			#trigger-source-cells = <0>;
    431		};
    432
    433		hub_port3: port@3 {
    434			reg = <3>;
    435			#trigger-source-cells = <0>;
    436		};
    437	};
    438};