cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

kirkwood-ns2-common.dtsi (1555B)

      1// SPDX-License-Identifier: GPL-2.0
      2#include "kirkwood.dtsi"
      3#include "kirkwood-6281.dtsi"
      4
      5/ {
      6	chosen {
      7		bootargs = "console=ttyS0,115200n8";
      8		stdout-path = &uart0;
      9	};
     10
     11	ocp@f1000000 {
     12		pinctrl: pin-controller@10000 {
     13			pmx_ns2_sata0: pmx-ns2-sata0 {
     14				marvell,pins = "mpp21";
     15				marvell,function = "sata0";
     16			};
     17			pmx_ns2_sata1: pmx-ns2-sata1 {
     18				marvell,pins = "mpp20";
     19				marvell,function = "sata1";
     20			};
     21		};
     22
     23		serial@12000 {
     24			status = "okay";
     25		};
     26
     27		spi@10600 {
     28			status = "okay";
     29
     30			flash@0 {
     31				#address-cells = <1>;
     32				#size-cells = <1>;
     33				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
     34				reg = <0>;
     35				spi-max-frequency = <20000000>;
     36				mode = <0>;
     37
     38				partition@0 {
     39					reg = <0x0 0x80000>;
     40					label = "u-boot";
     41				};
     42			};
     43		};
     44
     45		i2c@11000 {
     46			status = "okay";
     47
     48			eeprom@50 {
     49				compatible = "atmel,24c04";
     50				pagesize = <16>;
     51				reg = <0x50>;
     52			};
     53		};
     54	};
     55
     56	gpio_keys {
     57		compatible = "gpio-keys";
     58		#address-cells = <1>;
     59		#size-cells = <0>;
     60
     61		power {
     62			label = "Power push button";
     63			linux,code = <KEY_POWER>;
     64			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
     65		};
     66	};
     67
     68	gpio-leds {
     69		compatible = "gpio-leds";
     70
     71		red-fail {
     72			label = "ns2:red:fail";
     73			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
     74		};
     75	};
     76
     77	gpio_poweroff {
     78		compatible = "gpio-poweroff";
     79		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
     80	};
     81
     82};
     83
     84&mdio {
     85	status = "okay";
     86
     87	ethphy0: ethernet-phy@X {
     88                /* overwrite reg property in board file */
     89	};
     90};
     91
     92&eth0 {
     93	status = "okay";
     94	ethernet0-port@0 {
     95		phy-handle = <&ethphy0>;
     96	};
     97};