cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

kirkwood-rd88f6192.dts (2291B)

      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Marvell RD88F6192 Board descrition
      4 *
      5 * Andrew Lunn <andrew@lunn.ch>
      6 *
      7 * This file contains the definitions that are common between the three
      8 * variants of the Marvell Kirkwood Development Board.
      9 */
     10/dts-v1/;
     11
     12#include "kirkwood.dtsi"
     13#include "kirkwood-6192.dtsi"
     14
     15/ {
     16	model = "Marvell RD88F6192 reference design";
     17	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
     18
     19	memory {
     20		device_type = "memory";
     21		reg = <0x00000000 0x20000000>;
     22	};
     23
     24	chosen {
     25		bootargs = "console=ttyS0,115200n8";
     26		stdout-path = &uart0;
     27	};
     28
     29	ocp@f1000000 {
     30		pinctrl: pin-controller@10000 {
     31			pinctrl-0 = <&pmx_usb_power>;
     32			pinctrl-names = "default";
     33
     34                        pmx_usb_power: pmx-usb-power {
     35                                marvell,pins = "mpp10";
     36                                marvell,function = "gpo";
     37                        };
     38		};
     39
     40		serial@12000 {
     41			status = "okay";
     42
     43		};
     44
     45		spi@10600 {
     46			status = "okay";
     47
     48			m25p128@0 {
     49				#address-cells = <1>;
     50				#size-cells = <1>;
     51				compatible = "st,m25p128", "jedec,spi-nor";
     52				reg = <0>;
     53				spi-max-frequency = <20000000>;
     54				mode = <0>;
     55			};
     56		};
     57
     58		sata@80000 {
     59			status = "okay";
     60			nr-ports = <2>;
     61		};
     62	};
     63
     64	regulators {
     65                compatible = "simple-bus";
     66                #address-cells = <1>;
     67                #size-cells = <0>;
     68                pinctrl-0 = <&pmx_usb_power>;
     69                pinctrl-names = "default";
     70
     71                usb_power: regulator@0 {
     72                        compatible = "regulator-fixed";
     73                        reg = <0>;
     74                        regulator-name = "USB VBUS";
     75                        regulator-min-microvolt = <5000000>;
     76                        regulator-max-microvolt = <5000000>;
     77                        enable-active-high;
     78                        regulator-always-on;
     79                        regulator-boot-on;
     80                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
     81                };
     82	};
     83};
     84
     85&mdio {
     86        status = "okay";
     87
     88        ethphy0: ethernet-phy@8 {
     89                reg = <8>;
     90        };
     91};
     92
     93&eth0 {
     94        status = "okay";
     95        ethernet0-port@0 {
     96                phy-handle = <&ethphy0>;
     97        };
     98};
     99
    100&pciec {
    101        status = "okay";
    102};
    103
    104&pcie0 {
    105	status = "okay";
    106};