logicpd-torpedo-som.dtsi (5588B)
1// SPDX-License-Identifier: GPL-2.0-only 2 3#include <dt-bindings/input/input.h> 4 5/ { 6 chosen { 7 stdout-path = &uart1; 8 }; 9 10 cpus { 11 cpu@0 { 12 cpu0-supply = <&vcc>; 13 }; 14 }; 15 16 memory@80000000 { 17 device_type = "memory"; 18 reg = <0x80000000 0>; 19 }; 20 21 leds { 22 compatible = "gpio-leds"; 23 user0 { 24 label = "user0"; 25 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ 26 linux,default-trigger = "none"; 27 }; 28 }; 29 30 /* fixed 26MHz oscillator */ 31 hfclk_26m: oscillator { 32 #clock-cells = <0>; 33 compatible = "fixed-clock"; 34 clock-frequency = <26000000>; 35 }; 36}; 37 38/* The Torpedo doesn't route the USB host pins */ 39&usbhshost { 40 status = "disabled"; 41}; 42 43&gpmc { 44 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ 45 46 nand@0,0 { 47 compatible = "ti,omap2-nand"; 48 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ 49 interrupt-parent = <&gpmc>; 50 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ 51 <1 IRQ_TYPE_NONE>; /* termcount */ 52 linux,mtd-name = "micron,mt29f4g16abbda3w"; 53 nand-bus-width = <16>; 54 ti,nand-ecc-opt = "bch8"; 55 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ 56 gpmc,sync-clk-ps = <0>; 57 gpmc,cs-on-ns = <0>; 58 gpmc,cs-rd-off-ns = <44>; 59 gpmc,cs-wr-off-ns = <44>; 60 gpmc,adv-on-ns = <6>; 61 gpmc,adv-rd-off-ns = <34>; 62 gpmc,adv-wr-off-ns = <44>; 63 gpmc,we-off-ns = <40>; 64 gpmc,oe-off-ns = <54>; 65 gpmc,access-ns = <64>; 66 gpmc,rd-cycle-ns = <82>; 67 gpmc,wr-cycle-ns = <82>; 68 gpmc,wr-access-ns = <40>; 69 gpmc,wr-data-mux-bus-ns = <0>; 70 gpmc,device-width = <2>; 71 #address-cells = <1>; 72 #size-cells = <1>; 73 }; 74}; 75 76&i2c1 { 77 pinctrl-names = "default"; 78 pinctrl-0 = <&i2c1_pins>; 79 clock-frequency = <2600000>; 80 81 twl: twl@48 { 82 reg = <0x48>; 83 interrupts = <7>; /* SYS_NIRQ cascaded to intc */ 84 interrupt-parent = <&intc>; 85 clocks = <&hfclk_26m>; 86 clock-names = "fck"; 87 88 twl_audio: audio { 89 compatible = "ti,twl4030-audio"; 90 codec { 91 }; 92 }; 93 }; 94}; 95 96&i2c2 { 97 pinctrl-names = "default"; 98 pinctrl-0 = <&i2c2_pins>; 99 clock-frequency = <400000>; 100}; 101 102&i2c3 { 103 pinctrl-names = "default"; 104 pinctrl-0 = <&i2c3_pins>; 105 clock-frequency = <400000>; 106 at24@50 { 107 compatible = "atmel,24c64"; 108 readonly; 109 reg = <0x50>; 110 }; 111}; 112 113&omap3_pmx_core { 114 mcbsp2_pins: pinmux_mcbsp2_pins { 115 pinctrl-single,pins = < 116 OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ 117 OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ 118 OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ 119 OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ 120 >; 121 }; 122 uart2_pins: pinmux_uart2_pins { 123 pinctrl-single,pins = < 124 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ 125 OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ 126 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ 127 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ 128 OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ 129 >; 130 }; 131 mcspi1_pins: pinmux_mcspi1_pins { 132 pinctrl-single,pins = < 133 OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ 134 OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ 135 OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ 136 OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ 137 >; 138 }; 139 hsusb_otg_pins: pinmux_hsusb_otg_pins { 140 pinctrl-single,pins = < 141 OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ 142 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ 143 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ 144 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ 145 146 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ 147 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ 148 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ 149 OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ 150 OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ 151 OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ 152 OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ 153 OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ 154 >; 155 }; 156 i2c1_pins: pinmux_i2c1_pins { 157 pinctrl-single,pins = < 158 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ 159 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ 160 >; 161 }; 162 i2c2_pins: pinmux_i2c2_pins { 163 pinctrl-single,pins = < 164 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ 165 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ 166 >; 167 }; 168 i2c3_pins: pinmux_i2c3_pins { 169 pinctrl-single,pins = < 170 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ 171 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ 172 >; 173 }; 174}; 175 176&uart2 { 177 interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; 178 pinctrl-names = "default"; 179 pinctrl-0 = <&uart2_pins>; 180}; 181 182&mcspi1 { 183 pinctrl-names = "default"; 184 pinctrl-0 = <&mcspi1_pins>; 185}; 186 187#include "twl4030.dtsi" 188#include "twl4030_omap3.dtsi" 189 190&twl { 191 twl_power: power { 192 compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; 193 ti,use_poweroff; 194 }; 195}; 196 197&twl_gpio { 198 ti,use-leds; 199}; 200 201&twl_keypad { 202 status = "disabled"; 203};