cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

omap3-cm-t3x30.dtsi (3220B)


      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Common support for CompuLab CM-T3x30 CoMs
      4 */
      5
      6#include "omap3-cm-t3x.dtsi"
      7
      8/ {
      9	cpus {
     10		cpu@0 {
     11			cpu0-supply = <&vcc>;
     12		};
     13	};
     14
     15	sound {
     16		compatible = "ti,omap-twl4030";
     17		ti,model = "cm-t35";
     18
     19		ti,mcbsp = <&mcbsp2>;
     20	};
     21};
     22
     23&omap3_pmx_core {
     24
     25	smsc1_pins: pinmux_smsc1_pins {
     26		pinctrl-single,pins = <
     27			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
     28			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
     29		>;
     30	};
     31
     32 	hsusb0_pins: pinmux_hsusb0_pins {
     33		pinctrl-single,pins = <
     34			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
     35			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
     36			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
     37			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
     38			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
     39			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
     40			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
     41			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
     42			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
     43			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
     44			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
     45			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
     46		>;
     47	};
     48};
     49
     50#include "omap-gpmc-smsc911x.dtsi"
     51
     52&gpmc {
     53	ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
     54		 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
     55
     56	smsc1: ethernet@gpmc {
     57		compatible = "smsc,lan9221", "smsc,lan9115";
     58		pinctrl-names = "default";
     59		pinctrl-0 = <&smsc1_pins>;
     60		interrupt-parent = <&gpio6>;
     61		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     62		reg = <5 0 0xff>;
     63	};
     64};
     65
     66&i2c1 {
     67	twl: twl@48 {
     68		reg = <0x48>;
     69		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
     70		interrupt-parent = <&intc>;
     71
     72		twl_audio: audio {
     73			compatible = "ti,twl4030-audio";
     74			codec {
     75			};
     76		};
     77	};
     78};
     79
     80#include "twl4030.dtsi"
     81#include "twl4030_omap3.dtsi"
     82#include <dt-bindings/input/input.h>
     83
     84&venc {
     85	vdda-supply = <&vdac>;
     86};
     87
     88&mmc1 {
     89	vmmc-supply = <&vmmc1>;
     90};
     91
     92&twl_gpio {
     93	ti,use-leds;
     94	/* pullups: BIT(0) */
     95	ti,pullups = <0x000001>;
     96};
     97
     98&twl_keypad {
     99	linux,keymap = <
    100				MATRIX_KEY(0x00, 0x01, KEY_A)
    101				MATRIX_KEY(0x00, 0x02, KEY_B)
    102				MATRIX_KEY(0x00, 0x03, KEY_LEFT)
    103
    104				MATRIX_KEY(0x01, 0x01, KEY_UP)
    105				MATRIX_KEY(0x01, 0x02, KEY_ENTER)
    106				MATRIX_KEY(0x01, 0x03, KEY_DOWN)
    107
    108				MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
    109				MATRIX_KEY(0x02, 0x02, KEY_C)
    110				MATRIX_KEY(0x02, 0x03, KEY_D)
    111			>;
    112};
    113
    114&hsusb1_phy {
    115	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
    116};
    117
    118&hsusb2_phy {
    119	reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
    120};
    121
    122&usb_otg_hs {
    123	pinctrl-names = "default";
    124	pinctrl-0 = <&hsusb0_pins>;
    125	interface-type = <0>;
    126	usb-phy = <&usb2_phy>;
    127	phys = <&usb2_phy>;
    128	phy-names = "usb2-phy";
    129	mode = <3>;
    130	power = <50>;
    131};