cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

omap3-evm-common.dtsi (4000B)

      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Common support for omap3 EVM boards
      4 */
      5
      6#include <dt-bindings/input/input.h>
      7#include "omap-gpmc-smsc911x.dtsi"
      8
      9/ {
     10	cpus {
     11		cpu@0 {
     12			cpu0-supply = <&vcc>;
     13		};
     14	};
     15
     16	/* HS USB Port 2 Power */
     17	hsusb2_power: hsusb2_power_reg {
     18		compatible = "regulator-fixed";
     19		regulator-name = "hsusb2_vbus";
     20		regulator-min-microvolt = <3300000>;
     21		regulator-max-microvolt = <3300000>;
     22		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
     23		startup-delay-us = <70000>;
     24		enable-active-high;
     25	};
     26
     27	/* HS USB Host PHY on PORT 2 */
     28	hsusb2_phy: hsusb2_phy {
     29		compatible = "usb-nop-xceiv";
     30		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
     31		vcc-supply = <&hsusb2_power>;
     32		#phy-cells = <0>;
     33	};
     34
     35	leds {
     36		compatible = "gpio-leds";
     37		ledb {
     38			label = "omap3evm::ledb";
     39			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
     40			linux,default-trigger = "default-on";
     41		};
     42	};
     43
     44	wl12xx_vmmc: wl12xx_vmmc {
     45		compatible = "regulator-fixed";
     46		regulator-name = "vwl1271";
     47		regulator-min-microvolt = <1800000>;
     48		regulator-max-microvolt = <1800000>;
     49		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
     50		startup-delay-us = <70000>;
     51		enable-active-high;
     52		vin-supply = <&vmmc2>;
     53	};
     54};
     55
     56&i2c1 {
     57	clock-frequency = <2600000>;
     58
     59	twl: twl@48 {
     60		reg = <0x48>;
     61		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
     62		interrupt-parent = <&intc>;
     63	};
     64};
     65
     66#include "twl4030.dtsi"
     67#include "twl4030_omap3.dtsi"
     68#include "omap3-panel-sharp-ls037v7dw01.dtsi"
     69
     70&backlight0 {
     71	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
     72};
     73
     74&twl {
     75	twl_power: power {
     76		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
     77		ti,use_poweroff;
     78	};
     79};
     80
     81&i2c2 {
     82	clock-frequency = <400000>;
     83};
     84
     85&i2c3 {
     86	clock-frequency = <400000>;
     87
     88	/*
     89	 * TVP5146 Video decoder-in for analog input support.
     90	 */
     91	tvp5146@5c {
     92		compatible = "ti,tvp5146m2";
     93		reg = <0x5c>;
     94	};
     95};
     96
     97&lcd_3v3 {
     98	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
     99};
    100
    101&lcd0 {
    102	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
    103	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
    104	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
    105		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
    106		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
    107};
    108
    109&mcspi1 {
    110	tsc2046@0 {
    111		interrupt-parent = <&gpio6>;
    112		interrupts = <15 0>;		/* gpio175 */
    113		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
    114	};
    115};
    116
    117&mmc1 {
    118	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
    119	vmmc-supply = <&vmmc1>;
    120	vqmmc-supply = <&vsim>;
    121	bus-width = <8>;
    122};
    123
    124&mmc2 {
    125	interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
    126	vmmc-supply = <&wl12xx_vmmc>;
    127	non-removable;
    128	bus-width = <4>;
    129	cap-power-off-card;
    130
    131	#address-cells = <1>;
    132	#size-cells = <0>;
    133	wlcore: wlcore@2 {
    134		compatible = "ti,wl1271";
    135		reg = <2>;
    136		/* gpio_149 with uart1_rts pad as wakeirq */
    137		interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
    138				      <&omap3_pmx_core 0x14e>;
    139		interrupt-names = "irq", "wakeup";
    140		ref-clock-frequency = <38400000>;
    141	};
    142};
    143
    144&twl_gpio {
    145	ti,use-leds;
    146};
    147
    148&twl_keypad {
    149	linux,keymap = <
    150			MATRIX_KEY(2, 2, KEY_1)
    151			MATRIX_KEY(1, 1, KEY_2)
    152			MATRIX_KEY(0, 0, KEY_3)
    153			MATRIX_KEY(3, 2, KEY_4)
    154			MATRIX_KEY(2, 1, KEY_5)
    155			MATRIX_KEY(1, 0, KEY_6)
    156			MATRIX_KEY(1, 3, KEY_7)
    157			MATRIX_KEY(3, 1, KEY_8)
    158			MATRIX_KEY(2, 0, KEY_9)
    159			MATRIX_KEY(2, 3, KEY_KPASTERISK)
    160			MATRIX_KEY(0, 2, KEY_0)
    161			MATRIX_KEY(3, 0, KEY_KPDOT)
    162			/* s4 not wired */
    163			MATRIX_KEY(1, 2, KEY_BACKSPACE)
    164			MATRIX_KEY(0, 1, KEY_ENTER)
    165			>;
    166};
    167
    168&usbhshost {
    169	port2-mode = "ehci-phy";
    170};
    171
    172&usbhsehci {
    173	phys = <0 &hsusb2_phy>;
    174};
    175
    176&usb_otg_hs {
    177	interface-type = <0>;
    178	usb-phy = <&usb2_phy>;
    179	phys = <&usb2_phy>;
    180	phy-names = "usb2-phy";
    181	mode = <3>;
    182	power = <50>;
    183};
    184
    185&gpmc {
    186	ethernet@gpmc {
    187		interrupt-parent = <&gpio6>;
    188		interrupts = <16 8>;
    189		reg = <5 0 0xff>;
    190	};
    191};
    192
    193&vaux2 {
    194	regulator-name = "usb_1v8";
    195	regulator-min-microvolt = <1800000>;
    196	regulator-max-microvolt = <1800000>;
    197	regulator-always-on;
    198};