cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

omap3-gta04a5.dts (2718B)

      1// SPDX-License-Identifier: GPL-2.0-only
      2/*
      3 * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
      4 */
      5
      6#include "omap3-gta04.dtsi"
      7
      8/ {
      9	model = "Goldelico GTA04A5/Letux 2804";
     10
     11	sound {
     12		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
     13	};
     14
     15	wlan_en: wlan_en_regulator {
     16		compatible = "regulator-fixed";
     17		pinctrl-names = "default";
     18		pinctrl-0 = <&wlan_pins>;
     19		regulator-name = "wlan-en-regulator";
     20		regulator-min-microvolt = <1800000>;
     21		regulator-max-microvolt = <1800000>;
     22
     23		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
     24
     25		startup-delay-us = <70000>;
     26		enable-active-high;
     27	};
     28
     29	pps {
     30		compatible = "pps-gpio";
     31		pinctrl-names = "default";
     32		pinctrl-0 = <&pps_pins>;
     33
     34		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
     35	};
     36
     37};
     38
     39&gpio5 {
     40	irda-en-hog {
     41		gpio-hog;
     42		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
     43		output-high;	/* activate gpio_175 to disable IrDA receiver */
     44	};
     45};
     46
     47&omap3_pmx_core {
     48	bt_pins: pinmux_bt_pins {
     49		pinctrl-single,pins = <
     50			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
     51		>;
     52	};
     53
     54	wlan_pins: pinmux_wlan_pins {
     55		pinctrl-single,pins = <
     56			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
     57		>;
     58	};
     59
     60	wlan_irq_pin: pinmux_wlan_irq_pin {
     61		pinctrl-single,pins = <
     62			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
     63		>;
     64	};
     65
     66	irda_pins: pinmux_irda {
     67		pinctrl-single,pins = <
     68			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
     69		>;
     70	};
     71
     72	pps_pins: pinmux_pps_pins {
     73		pinctrl-single,pins = <
     74			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
     75		>;
     76	};
     77
     78};
     79
     80/*
     81 * for WL183x module see
     82 * Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
     83 */
     84
     85&wifi_pwrseq {
     86	/delete-property/ reset-gpios;
     87};
     88
     89&mmc2 {
     90	vmmc-supply = <&wlan_en>;
     91	bus-width = <4>;
     92	cap-power-off-card;
     93	non-removable;
     94
     95	pinctrl-names = "default";
     96	pinctrl-0 = <&wlan_irq_pin>;
     97
     98	#address-cells = <1>;
     99	#size-cells = <0>;
    100
    101	/delete-property/ mmc-pwrseq;
    102
    103	wlcore: wlcore@2 {
    104		compatible = "ti,wl1837";
    105		reg = <2>;
    106		interrupt-parent = <&gpio5>;
    107		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
    108		ref-clock-frequency = <26000000>;
    109	};
    110};
    111
    112&i2c2 {
    113	/delete-node/ bmp085@77;
    114	/delete-node/ bma180@41;
    115	/delete-node/ itg3200@68;
    116	/delete-node/ hmc5843@1e;
    117
    118	bmg160@69 {
    119		compatible = "bosch,bmg160";
    120		reg = <0x69>;
    121	};
    122
    123	bmc150@10 {
    124		compatible = "bosch,bmc150_accel";
    125		reg = <0x10>;
    126	};
    127
    128	bmc150@12 {
    129		compatible = "bosch,bmc150_magn";
    130		reg = <0x12>;
    131	};
    132
    133	bme280@76 {
    134		compatible = "bosch,bme280";
    135		reg = <0x76>;
    136		vdda-supply = <&vio>;
    137		vddd-supply = <&vio>;
    138	};
    139};