omap3-n900.dts (30426B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> 4 * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> 5 */ 6 7/dts-v1/; 8 9#include "omap34xx.dtsi" 10#include <dt-bindings/input/input.h> 11#include <dt-bindings/leds/common.h> 12 13/* 14 * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall 15 * for omap AES HW crypto support. When linux kernel try to access memory of AES 16 * blocks then kernel receive "Unhandled fault: external abort on non-linefetch" 17 * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no 18 * crash anymore) omap AES support will be disabled for all Nokia N900 devices. 19 * There is "unofficial" version of bootloader which enables AES in L3 firewall 20 * but it is not widely used and to prevent kernel crash rather AES is disabled. 21 * There is also no runtime detection code if AES is disabled in L3 firewall... 22 */ 23&aes1_target { 24 status = "disabled"; 25}; 26 27&aes2_target { 28 status = "disabled"; 29}; 30 31/ { 32 model = "Nokia N900"; 33 compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; 34 35 aliases { 36 i2c0; 37 i2c1 = &i2c1; 38 i2c2 = &i2c2; 39 i2c3 = &i2c3; 40 display0 = &lcd; 41 display1 = &tv; 42 }; 43 44 cpus { 45 cpu@0 { 46 cpu0-supply = <&vcc>; 47 }; 48 }; 49 50 leds { 51 compatible = "gpio-leds"; 52 heartbeat { 53 label = "debug::sleep"; 54 gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */ 55 linux,default-trigger = "default-on"; 56 pinctrl-names = "default"; 57 pinctrl-0 = <&debug_leds>; 58 }; 59 }; 60 61 memory@80000000 { 62 device_type = "memory"; 63 reg = <0x80000000 0x10000000>; /* 256 MB */ 64 }; 65 66 gpio_keys { 67 compatible = "gpio-keys"; 68 69 camera_lens_cover { 70 label = "Camera Lens Cover"; 71 gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ 72 linux,input-type = <EV_SW>; 73 linux,code = <SW_CAMERA_LENS_COVER>; 74 linux,can-disable; 75 }; 76 77 camera_focus { 78 label = "Camera Focus"; 79 gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ 80 linux,code = <KEY_CAMERA_FOCUS>; 81 linux,can-disable; 82 }; 83 84 camera_capture { 85 label = "Camera Capture"; 86 gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ 87 linux,code = <KEY_CAMERA>; 88 linux,can-disable; 89 }; 90 91 lock_button { 92 label = "Lock Button"; 93 gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ 94 linux,code = <KEY_SCREENLOCK>; 95 linux,can-disable; 96 }; 97 98 keypad_slide { 99 label = "Keypad Slide"; 100 gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ 101 linux,input-type = <EV_SW>; 102 linux,code = <SW_KEYPAD_SLIDE>; 103 linux,can-disable; 104 }; 105 106 proximity_sensor { 107 label = "Proximity Sensor"; 108 gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ 109 linux,input-type = <EV_SW>; 110 linux,code = <SW_FRONT_PROXIMITY>; 111 linux,can-disable; 112 }; 113 114 machine_cover { 115 label = "Machine Cover"; 116 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ 117 linux,input-type = <EV_SW>; 118 linux,code = <SW_MACHINE_COVER>; 119 linux,can-disable; 120 }; 121 }; 122 123 isp1707: isp1707 { 124 compatible = "nxp,isp1707"; 125 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; 126 usb-phy = <&usb2_phy>; 127 }; 128 129 tv: connector { 130 compatible = "composite-video-connector"; 131 label = "tv"; 132 133 port { 134 tv_connector_in: endpoint { 135 remote-endpoint = <&venc_out>; 136 }; 137 }; 138 }; 139 140 sound: n900-audio { 141 compatible = "nokia,n900-audio"; 142 143 nokia,cpu-dai = <&mcbsp2>; 144 nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; 145 nokia,headphone-amplifier = <&tpa6130a2>; 146 147 tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ 148 jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ 149 eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ 150 speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; 151 }; 152 153 battery: n900-battery { 154 compatible = "nokia,n900-battery"; 155 io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>; 156 io-channel-names = "temp", "bsi", "vbat"; 157 }; 158 159 pwm9: dmtimer-pwm { 160 compatible = "ti,omap-dmtimer-pwm"; 161 #pwm-cells = <3>; 162 ti,timers = <&timer9>; 163 ti,clock-source = <0x00>; /* timer_sys_ck */ 164 }; 165 166 ir: n900-ir { 167 compatible = "nokia,n900-ir"; 168 pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ 169 }; 170 171 rom_rng: rng { 172 compatible = "nokia,n900-rom-rng"; 173 clocks = <&rng_ick>; 174 clock-names = "ick"; 175 }; 176 177 /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ 178 vctcxo: vctcxo { 179 compatible = "fixed-clock"; 180 #clock-cells = <0>; 181 clock-frequency = <38400000>; 182 }; 183}; 184 185&isp { 186 vdds_csib-supply = <&vaux2>; 187 188 pinctrl-names = "default"; 189 pinctrl-0 = <&camera_pins>; 190 191 ports { 192 port@1 { 193 reg = <1>; 194 195 csi_isp: endpoint { 196 remote-endpoint = <&csi_cam1>; 197 bus-type = <3>; /* CCP2 */ 198 clock-lanes = <1>; 199 data-lanes = <0>; 200 lane-polarity = <0 0>; 201 /* Select strobe = <1> for back camera, <0> for front camera */ 202 strobe = <1>; 203 }; 204 }; 205 }; 206}; 207 208&omap3_pmx_core { 209 pinctrl-names = "default"; 210 211 uart2_pins: pinmux_uart2_pins { 212 pinctrl-single,pins = < 213 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ 214 OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ 215 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ 216 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ 217 >; 218 }; 219 220 uart3_pins: pinmux_uart3_pins { 221 pinctrl-single,pins = < 222 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */ 223 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ 224 >; 225 }; 226 227 ethernet_pins: pinmux_ethernet_pins { 228 pinctrl-single,pins = < 229 OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ 230 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ 231 OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ 232 >; 233 }; 234 235 gpmc_pins: pinmux_gpmc_pins { 236 pinctrl-single,pins = < 237 238 /* address lines */ 239 OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ 240 OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ 241 OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ 242 243 /* data lines, gpmc_d0..d7 not muxable according to TRM */ 244 OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ 245 OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ 246 OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ 247 OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ 248 OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ 249 OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ 250 OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ 251 OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ 252 253 /* 254 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable 255 * according to TRM. OneNAND seems to require PIN_INPUT on clock. 256 */ 257 OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ 258 OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ 259 >; 260 }; 261 262 i2c1_pins: pinmux_i2c1_pins { 263 pinctrl-single,pins = < 264 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ 265 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ 266 >; 267 }; 268 269 i2c2_pins: pinmux_i2c2_pins { 270 pinctrl-single,pins = < 271 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ 272 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ 273 >; 274 }; 275 276 i2c3_pins: pinmux_i2c3_pins { 277 pinctrl-single,pins = < 278 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ 279 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ 280 >; 281 }; 282 283 debug_leds: pinmux_debug_led_pins { 284 pinctrl-single,pins = < 285 OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ 286 >; 287 }; 288 289 mcspi4_pins: pinmux_mcspi4_pins { 290 pinctrl-single,pins = < 291 OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ 292 OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ 293 OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ 294 OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ 295 >; 296 }; 297 298 mmc1_pins: pinmux_mmc1_pins { 299 pinctrl-single,pins = < 300 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ 301 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ 302 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ 303 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ 304 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ 305 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ 306 >; 307 }; 308 309 mmc2_pins: pinmux_mmc2_pins { 310 pinctrl-single,pins = < 311 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ 312 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ 313 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ 314 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ 315 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ 316 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ 317 OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ 318 OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ 319 OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ 320 OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ 321 >; 322 }; 323 324 acx565akm_pins: pinmux_acx565akm_pins { 325 pinctrl-single,pins = < 326 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ 327 >; 328 }; 329 330 dss_sdi_pins: pinmux_dss_sdi_pins { 331 pinctrl-single,pins = < 332 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ 333 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ 334 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ 335 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ 336 337 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ 338 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ 339 >; 340 }; 341 342 wl1251_pins: pinmux_wl1251 { 343 pinctrl-single,pins = < 344 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ 345 OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ 346 >; 347 }; 348 349 ssi_pins: pinmux_ssi { 350 pinctrl-single,pins = < 351 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ 352 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ 353 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ 354 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ 355 OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ 356 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ 357 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ 358 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ 359 >; 360 }; 361 362 modem_pins: pinmux_modem { 363 pinctrl-single,pins = < 364 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ 365 OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ 366 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ 367 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ 368 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ 369 OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ 370 >; 371 }; 372 373 camera_pins: pinmux_camera { 374 pinctrl-single,pins = < 375 OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */ 376 OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */ 377 OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ 378 OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */ 379 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */ 380 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */ 381 OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */ 382 OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */ 383 OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */ 384 OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */ 385 OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */ 386 >; 387 }; 388}; 389 390&i2c1 { 391 pinctrl-names = "default"; 392 pinctrl-0 = <&i2c1_pins>; 393 394 clock-frequency = <2200000>; 395 396 twl: twl@48 { 397 reg = <0x48>; 398 interrupts = <7>; /* SYS_NIRQ cascaded to intc */ 399 interrupt-parent = <&intc>; 400 }; 401}; 402 403#include "twl4030.dtsi" 404#include "twl4030_omap3.dtsi" 405 406&vaux1 { 407 regulator-name = "V28"; 408 regulator-min-microvolt = <2800000>; 409 regulator-max-microvolt = <2800000>; 410 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 411 regulator-always-on; /* due to battery cover sensor */ 412}; 413 414&vaux2 { 415 regulator-name = "VCSI"; 416 regulator-min-microvolt = <1800000>; 417 regulator-max-microvolt = <1800000>; 418 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 419}; 420 421&vaux3 { 422 regulator-name = "VMMC2_30"; 423 regulator-min-microvolt = <2800000>; 424 regulator-max-microvolt = <3000000>; 425 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 426}; 427 428&vaux4 { 429 regulator-name = "VCAM_ANA_28"; 430 regulator-min-microvolt = <2800000>; 431 regulator-max-microvolt = <2800000>; 432 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 433}; 434 435&vmmc1 { 436 regulator-name = "VMMC1"; 437 regulator-min-microvolt = <1850000>; 438 regulator-max-microvolt = <3150000>; 439 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 440}; 441 442&vmmc2 { 443 regulator-name = "V28_A"; 444 regulator-min-microvolt = <2800000>; 445 regulator-max-microvolt = <3000000>; 446 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 447 regulator-always-on; /* due VIO leak to AIC34 VDDs */ 448}; 449 450&vpll1 { 451 regulator-name = "VPLL"; 452 regulator-min-microvolt = <1800000>; 453 regulator-max-microvolt = <1800000>; 454 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 455 regulator-always-on; 456}; 457 458&vpll2 { 459 regulator-name = "VSDI_CSI"; 460 regulator-min-microvolt = <1800000>; 461 regulator-max-microvolt = <1800000>; 462 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 463 regulator-always-on; 464}; 465 466&vsim { 467 regulator-name = "VMMC2_IO_18"; 468 regulator-min-microvolt = <1800000>; 469 regulator-max-microvolt = <1800000>; 470 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ 471}; 472 473&vio { 474 regulator-name = "VIO"; 475 regulator-min-microvolt = <1800000>; 476 regulator-max-microvolt = <1800000>; 477}; 478 479&vintana1 { 480 regulator-name = "VINTANA1"; 481 /* fixed to 1500000 */ 482 regulator-always-on; 483}; 484 485&vintana2 { 486 regulator-name = "VINTANA2"; 487 regulator-min-microvolt = <2750000>; 488 regulator-max-microvolt = <2750000>; 489 regulator-always-on; 490}; 491 492&vintdig { 493 regulator-name = "VINTDIG"; 494 /* fixed to 1500000 */ 495 regulator-always-on; 496}; 497 498/* First two dma channels are reserved on secure omap3 */ 499&sdma { 500 dma-channel-mask = <0xfffffffc>; 501}; 502 503&twl { 504 twl_audio: audio { 505 compatible = "ti,twl4030-audio"; 506 ti,enable-vibra = <1>; 507 }; 508 509 twl_power: power { 510 compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; 511 ti,use_poweroff; 512 }; 513}; 514 515&twl_keypad { 516 linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) 517 MATRIX_KEY(0x00, 0x01, KEY_O) 518 MATRIX_KEY(0x00, 0x02, KEY_P) 519 MATRIX_KEY(0x00, 0x03, KEY_COMMA) 520 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) 521 MATRIX_KEY(0x00, 0x06, KEY_A) 522 MATRIX_KEY(0x00, 0x07, KEY_S) 523 524 MATRIX_KEY(0x01, 0x00, KEY_W) 525 MATRIX_KEY(0x01, 0x01, KEY_D) 526 MATRIX_KEY(0x01, 0x02, KEY_F) 527 MATRIX_KEY(0x01, 0x03, KEY_G) 528 MATRIX_KEY(0x01, 0x04, KEY_H) 529 MATRIX_KEY(0x01, 0x05, KEY_J) 530 MATRIX_KEY(0x01, 0x06, KEY_K) 531 MATRIX_KEY(0x01, 0x07, KEY_L) 532 533 MATRIX_KEY(0x02, 0x00, KEY_E) 534 MATRIX_KEY(0x02, 0x01, KEY_DOT) 535 MATRIX_KEY(0x02, 0x02, KEY_UP) 536 MATRIX_KEY(0x02, 0x03, KEY_ENTER) 537 MATRIX_KEY(0x02, 0x05, KEY_Z) 538 MATRIX_KEY(0x02, 0x06, KEY_X) 539 MATRIX_KEY(0x02, 0x07, KEY_C) 540 MATRIX_KEY(0x02, 0x08, KEY_F9) 541 542 MATRIX_KEY(0x03, 0x00, KEY_R) 543 MATRIX_KEY(0x03, 0x01, KEY_V) 544 MATRIX_KEY(0x03, 0x02, KEY_B) 545 MATRIX_KEY(0x03, 0x03, KEY_N) 546 MATRIX_KEY(0x03, 0x04, KEY_M) 547 MATRIX_KEY(0x03, 0x05, KEY_SPACE) 548 MATRIX_KEY(0x03, 0x06, KEY_SPACE) 549 MATRIX_KEY(0x03, 0x07, KEY_LEFT) 550 551 MATRIX_KEY(0x04, 0x00, KEY_T) 552 MATRIX_KEY(0x04, 0x01, KEY_DOWN) 553 MATRIX_KEY(0x04, 0x02, KEY_RIGHT) 554 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) 555 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) 556 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) 557 MATRIX_KEY(0x04, 0x08, KEY_F10) 558 559 MATRIX_KEY(0x05, 0x00, KEY_Y) 560 MATRIX_KEY(0x05, 0x08, KEY_F11) 561 562 MATRIX_KEY(0x06, 0x00, KEY_U) 563 564 MATRIX_KEY(0x07, 0x00, KEY_I) 565 MATRIX_KEY(0x07, 0x01, KEY_F7) 566 MATRIX_KEY(0x07, 0x02, KEY_F8) 567 >; 568}; 569 570&twl_gpio { 571 ti,pullups = <0x0>; 572 ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ 573}; 574 575&i2c2 { 576 pinctrl-names = "default"; 577 pinctrl-0 = <&i2c2_pins>; 578 579 clock-frequency = <100000>; 580 581 tlv320aic3x: tlv320aic3x@18 { 582 compatible = "ti,tlv320aic3x"; 583 reg = <0x18>; 584 reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ 585 ai3x-gpio-func = < 586 0 /* AIC3X_GPIO1_FUNC_DISABLED */ 587 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ 588 >; 589 590 AVDD-supply = <&vmmc2>; 591 DRVDD-supply = <&vmmc2>; 592 IOVDD-supply = <&vio>; 593 DVDD-supply = <&vio>; 594 595 ai3x-micbias-vg = <1>; 596 }; 597 598 tlv320aic3x_aux: tlv320aic3x@19 { 599 compatible = "ti,tlv320aic3x"; 600 reg = <0x19>; 601 reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ 602 603 AVDD-supply = <&vmmc2>; 604 DRVDD-supply = <&vmmc2>; 605 IOVDD-supply = <&vio>; 606 DVDD-supply = <&vio>; 607 608 ai3x-micbias-vg = <2>; 609 }; 610 611 tsl2563: tsl2563@29 { 612 compatible = "amstaos,tsl2563"; 613 reg = <0x29>; 614 615 amstaos,cover-comp-gain = <16>; 616 }; 617 618 adp1653: led-controller@30 { 619 compatible = "adi,adp1653"; 620 reg = <0x30>; 621 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ 622 623 flash { 624 flash-timeout-us = <500000>; 625 flash-max-microamp = <320000>; 626 led-max-microamp = <50000>; 627 }; 628 indicator { 629 led-max-microamp = <17500>; 630 }; 631 }; 632 633 lp5523: lp5523@32 { 634 #address-cells = <1>; 635 #size-cells = <0>; 636 compatible = "national,lp5523"; 637 reg = <0x32>; 638 clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ 639 enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ 640 641 led@0 { 642 reg = <0>; 643 chan-name = "lp5523:kb1"; 644 led-cur = /bits/ 8 <50>; 645 max-cur = /bits/ 8 <100>; 646 color = <LED_COLOR_ID_WHITE>; 647 function = LED_FUNCTION_KBD_BACKLIGHT; 648 }; 649 650 led@1 { 651 reg = <1>; 652 chan-name = "lp5523:kb2"; 653 led-cur = /bits/ 8 <50>; 654 max-cur = /bits/ 8 <100>; 655 color = <LED_COLOR_ID_WHITE>; 656 function = LED_FUNCTION_KBD_BACKLIGHT; 657 }; 658 659 led@2 { 660 reg = <2>; 661 chan-name = "lp5523:kb3"; 662 led-cur = /bits/ 8 <50>; 663 max-cur = /bits/ 8 <100>; 664 color = <LED_COLOR_ID_WHITE>; 665 function = LED_FUNCTION_KBD_BACKLIGHT; 666 }; 667 668 led@3 { 669 reg = <3>; 670 chan-name = "lp5523:kb4"; 671 led-cur = /bits/ 8 <50>; 672 max-cur = /bits/ 8 <100>; 673 color = <LED_COLOR_ID_WHITE>; 674 function = LED_FUNCTION_KBD_BACKLIGHT; 675 }; 676 677 led@4 { 678 reg = <4>; 679 chan-name = "lp5523:b"; 680 led-cur = /bits/ 8 <50>; 681 max-cur = /bits/ 8 <100>; 682 color = <LED_COLOR_ID_BLUE>; 683 function = LED_FUNCTION_STATUS; 684 }; 685 686 led@5 { 687 reg = <5>; 688 chan-name = "lp5523:g"; 689 led-cur = /bits/ 8 <50>; 690 max-cur = /bits/ 8 <100>; 691 color = <LED_COLOR_ID_GREEN>; 692 function = LED_FUNCTION_STATUS; 693 }; 694 695 led@6 { 696 reg = <6>; 697 chan-name = "lp5523:r"; 698 led-cur = /bits/ 8 <50>; 699 max-cur = /bits/ 8 <100>; 700 color = <LED_COLOR_ID_RED>; 701 function = LED_FUNCTION_STATUS; 702 }; 703 704 led@7 { 705 reg = <7>; 706 chan-name = "lp5523:kb5"; 707 led-cur = /bits/ 8 <50>; 708 max-cur = /bits/ 8 <100>; 709 color = <LED_COLOR_ID_WHITE>; 710 function = LED_FUNCTION_KBD_BACKLIGHT; 711 }; 712 713 led@8 { 714 reg = <8>; 715 chan-name = "lp5523:kb6"; 716 led-cur = /bits/ 8 <50>; 717 max-cur = /bits/ 8 <100>; 718 color = <LED_COLOR_ID_WHITE>; 719 function = LED_FUNCTION_KBD_BACKLIGHT; 720 }; 721 }; 722 723 bq27200: bq27200@55 { 724 compatible = "ti,bq27200"; 725 reg = <0x55>; 726 power-supplies = <&bq24150a>; 727 }; 728 729 /* Stereo headphone amplifier */ 730 tpa6130a2: tpa6130a2@60 { 731 compatible = "ti,tpa6130a2"; 732 reg = <0x60>; 733 734 Vdd-supply = <&vmmc2>; 735 736 power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ 737 }; 738 739 si4713: si4713@63 { 740 compatible = "silabs,si4713"; 741 reg = <0x63>; 742 743 interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ 744 reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ 745 vio-supply = <&vio>; 746 vdd-supply = <&vaux1>; 747 }; 748 749 bq24150a: bq24150a@6b { 750 compatible = "ti,bq24150a"; 751 reg = <0x6b>; 752 753 ti,current-limit = <100>; 754 ti,weak-battery-voltage = <3400>; 755 ti,battery-regulation-voltage = <4200>; 756 ti,charge-current = <650>; 757 ti,termination-current = <100>; 758 ti,resistor-sense = <68>; 759 760 ti,usb-charger-detection = <&isp1707>; 761 }; 762}; 763 764&i2c3 { 765 pinctrl-names = "default"; 766 pinctrl-0 = <&i2c3_pins>; 767 768 clock-frequency = <400000>; 769 770 lis302dl: lis3lv02d@1d { 771 compatible = "st,lis3lv02d"; 772 reg = <0x1d>; 773 774 Vdd-supply = <&vaux1>; 775 Vdd_IO-supply = <&vio>; 776 777 interrupt-parent = <&gpio6>; 778 interrupts = <21 20>; /* 181 and 180 */ 779 780 /* click flags */ 781 st,click-single-x; 782 st,click-single-y; 783 st,click-single-z; 784 785 /* Limits are 0.5g * value */ 786 st,click-threshold-x = <8>; 787 st,click-threshold-y = <8>; 788 st,click-threshold-z = <10>; 789 790 /* Click must be longer than time limit */ 791 st,click-time-limit = <9>; 792 793 /* Kind of debounce filter */ 794 st,click-latency = <50>; 795 796 /* Interrupt line 2 for click detection */ 797 st,irq2-click; 798 799 st,wakeup-x-hi; 800 st,wakeup-y-hi; 801 st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ 802 803 st,wakeup2-z-hi; 804 st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */ 805 806 st,hipass1-disable; 807 st,hipass2-disable; 808 809 st,axis-x = <1>; /* LIS3_DEV_X */ 810 st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */ 811 st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ 812 813 st,min-limit-x = <(-32)>; 814 st,min-limit-y = <3>; 815 st,min-limit-z = <3>; 816 817 st,max-limit-x = <(-3)>; 818 st,max-limit-y = <32>; 819 st,max-limit-z = <32>; 820 }; 821 822 cam1: camera@3e { 823 compatible = "toshiba,et8ek8"; 824 reg = <0x3e>; 825 826 vana-supply = <&vaux4>; 827 828 clocks = <&isp 0>; 829 clock-names = "extclk"; 830 clock-frequency = <9600000>; 831 832 reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ 833 834 lens-focus = <&ad5820>; 835 836 port { 837 csi_cam1: endpoint { 838 bus-type = <3>; /* CCP2 */ 839 strobe = <1>; 840 clock-inv = <0>; 841 crc = <1>; 842 843 remote-endpoint = <&csi_isp>; 844 }; 845 }; 846 }; 847 848 /* D/A converter for auto-focus */ 849 ad5820: dac@c { 850 compatible = "adi,ad5820"; 851 reg = <0x0c>; 852 853 VANA-supply = <&vaux4>; 854 855 #io-channel-cells = <0>; 856 }; 857}; 858 859&mmc1 { 860 pinctrl-names = "default"; 861 pinctrl-0 = <&mmc1_pins>; 862 vmmc-supply = <&vmmc1>; 863 bus-width = <4>; 864}; 865 866/* most boards use vaux3, only some old versions use vmmc2 instead */ 867&mmc2 { 868 pinctrl-names = "default"; 869 pinctrl-0 = <&mmc2_pins>; 870 vmmc-supply = <&vaux3>; 871 vqmmc-supply = <&vsim>; 872 bus-width = <8>; 873 non-removable; 874 no-sdio; 875 no-sd; 876}; 877 878&mmc3 { 879 status = "disabled"; 880}; 881 882&gpmc { 883 ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ 884 <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ 885 pinctrl-names = "default"; 886 pinctrl-0 = <&gpmc_pins>; 887 888 /* sys_ndmareq1 could be used by the driver, not as gpio65 though */ 889 onenand@0,0 { 890 #address-cells = <1>; 891 #size-cells = <1>; 892 compatible = "ti,omap2-onenand"; 893 reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ 894 895 /* 896 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported 897 * bootloader set values when booted with v5.1 898 * (OneNAND Manufacturer: Samsung): 899 * 900 * cs0 GPMC_CS_CONFIG1: 0xfb001202 901 * cs0 GPMC_CS_CONFIG2: 0x00111100 902 * cs0 GPMC_CS_CONFIG3: 0x00020200 903 * cs0 GPMC_CS_CONFIG4: 0x11001102 904 * cs0 GPMC_CS_CONFIG5: 0x03101616 905 * cs0 GPMC_CS_CONFIG6: 0x90060000 906 */ 907 gpmc,sync-read; 908 gpmc,sync-write; 909 gpmc,burst-length = <16>; 910 gpmc,burst-read; 911 gpmc,burst-wrap; 912 gpmc,burst-write; 913 gpmc,device-width = <2>; 914 gpmc,mux-add-data = <2>; 915 gpmc,cs-on-ns = <0>; 916 gpmc,cs-rd-off-ns = <102>; 917 gpmc,cs-wr-off-ns = <102>; 918 gpmc,adv-on-ns = <0>; 919 gpmc,adv-rd-off-ns = <12>; 920 gpmc,adv-wr-off-ns = <12>; 921 gpmc,oe-on-ns = <12>; 922 gpmc,oe-off-ns = <102>; 923 gpmc,we-on-ns = <0>; 924 gpmc,we-off-ns = <102>; 925 gpmc,rd-cycle-ns = <132>; 926 gpmc,wr-cycle-ns = <132>; 927 gpmc,access-ns = <96>; 928 gpmc,page-burst-access-ns = <18>; 929 gpmc,bus-turnaround-ns = <0>; 930 gpmc,cycle2cycle-delay-ns = <0>; 931 gpmc,wait-monitoring-ns = <0>; 932 gpmc,clk-activation-ns = <6>; 933 gpmc,wr-data-mux-bus-ns = <36>; 934 gpmc,wr-access-ns = <96>; 935 gpmc,sync-clk-ps = <15000>; 936 937 /* 938 * MTD partition table corresponding to Nokia's 939 * Maemo 5 (Fremantle) release. 940 */ 941 partition@0 { 942 label = "bootloader"; 943 reg = <0x00000000 0x00020000>; 944 read-only; 945 }; 946 partition@1 { 947 label = "config"; 948 reg = <0x00020000 0x00060000>; 949 }; 950 partition@2 { 951 label = "log"; 952 reg = <0x00080000 0x00040000>; 953 }; 954 partition@3 { 955 label = "kernel"; 956 reg = <0x000c0000 0x00200000>; 957 }; 958 partition@4 { 959 label = "initfs"; 960 reg = <0x002c0000 0x00200000>; 961 }; 962 partition@5 { 963 label = "rootfs"; 964 reg = <0x004c0000 0x0fb40000>; 965 }; 966 }; 967 968 /* Ethernet is on some early development boards and qemu */ 969 ethernet@gpmc { 970 compatible = "smsc,lan91c94"; 971 interrupt-parent = <&gpio2>; 972 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ 973 reg = <1 0 0xf>; /* 16 byte IO range */ 974 bank-width = <2>; 975 pinctrl-names = "default"; 976 pinctrl-0 = <ðernet_pins>; 977 power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ 978 reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ 979 gpmc,device-width = <2>; 980 gpmc,sync-clk-ps = <0>; 981 gpmc,cs-on-ns = <0>; 982 gpmc,cs-rd-off-ns = <48>; 983 gpmc,cs-wr-off-ns = <24>; 984 gpmc,adv-on-ns = <0>; 985 gpmc,adv-rd-off-ns = <0>; 986 gpmc,adv-wr-off-ns = <0>; 987 gpmc,we-on-ns = <12>; 988 gpmc,we-off-ns = <18>; 989 gpmc,oe-on-ns = <12>; 990 gpmc,oe-off-ns = <48>; 991 gpmc,page-burst-access-ns = <0>; 992 gpmc,access-ns = <42>; 993 gpmc,rd-cycle-ns = <180>; 994 gpmc,wr-cycle-ns = <180>; 995 gpmc,bus-turnaround-ns = <0>; 996 gpmc,cycle2cycle-delay-ns = <0>; 997 gpmc,wait-monitoring-ns = <0>; 998 gpmc,clk-activation-ns = <0>; 999 gpmc,wr-access-ns = <0>; 1000 gpmc,wr-data-mux-bus-ns = <12>; 1001 }; 1002}; 1003 1004&mcspi1 { 1005 /* 1006 * For some reason, touchscreen is necessary for screen to work at 1007 * all on real hw. It works well without it on emulator. 1008 * 1009 * Also... order in the device tree actually matters here. 1010 */ 1011 tsc2005@0 { 1012 compatible = "ti,tsc2005"; 1013 spi-max-frequency = <6000000>; 1014 reg = <0>; 1015 1016 vio-supply = <&vio>; 1017 1018 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ 1019 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ 1020 1021 touchscreen-fuzz-x = <4>; 1022 touchscreen-fuzz-y = <7>; 1023 touchscreen-fuzz-pressure = <2>; 1024 touchscreen-size-x = <4096>; 1025 touchscreen-size-y = <4096>; 1026 touchscreen-max-pressure = <2048>; 1027 1028 ti,x-plate-ohms = <280>; 1029 ti,esd-recovery-timeout-ms = <8000>; 1030 }; 1031 1032 lcd: acx565akm@2 { 1033 compatible = "sony,acx565akm"; 1034 spi-max-frequency = <6000000>; 1035 reg = <2>; 1036 1037 pinctrl-names = "default"; 1038 pinctrl-0 = <&acx565akm_pins>; 1039 1040 label = "lcd"; 1041 reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ 1042 1043 port { 1044 lcd_in: endpoint { 1045 remote-endpoint = <&sdi_out>; 1046 }; 1047 }; 1048 }; 1049}; 1050 1051&mcspi4 { 1052 pinctrl-names = "default"; 1053 pinctrl-0 = <&mcspi4_pins>; 1054 1055 wl1251@0 { 1056 pinctrl-names = "default"; 1057 pinctrl-0 = <&wl1251_pins>; 1058 1059 vio-supply = <&vio>; 1060 1061 compatible = "ti,wl1251"; 1062 reg = <0>; 1063 spi-max-frequency = <48000000>; 1064 1065 spi-cpol; 1066 spi-cpha; 1067 1068 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ 1069 1070 interrupt-parent = <&gpio2>; 1071 interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ 1072 1073 clocks = <&vctcxo>; 1074 }; 1075}; 1076 1077/* RNG not directly accessible on n900, see omap3-rom-rng instead */ 1078&rng_target { 1079 status = "disabled"; 1080}; 1081 1082&usb_otg_hs { 1083 interface-type = <0>; 1084 usb-phy = <&usb2_phy>; 1085 phys = <&usb2_phy>; 1086 phy-names = "usb2-phy"; 1087 mode = <2>; 1088 power = <50>; 1089}; 1090 1091&uart1 { 1092 status = "disabled"; 1093}; 1094 1095&uart2 { 1096 pinctrl-names = "default"; 1097 pinctrl-0 = <&uart2_pins>; 1098 1099 bcm2048: bluetooth { 1100 compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth"; 1101 reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */ 1102 host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ 1103 bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ 1104 clocks = <&vctcxo>; 1105 clock-names = "sysclk"; 1106 }; 1107}; 1108 1109&uart3 { 1110 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; 1111 pinctrl-names = "default"; 1112 pinctrl-0 = <&uart3_pins>; 1113}; 1114 1115&dss { 1116 status = "okay"; 1117 1118 pinctrl-names = "default"; 1119 pinctrl-0 = <&dss_sdi_pins>; 1120 1121 vdds_sdi-supply = <&vaux1>; 1122 1123 ports { 1124 #address-cells = <1>; 1125 #size-cells = <0>; 1126 1127 port@1 { 1128 reg = <1>; 1129 1130 sdi_out: endpoint { 1131 remote-endpoint = <&lcd_in>; 1132 datapairs = <2>; 1133 }; 1134 }; 1135 }; 1136}; 1137 1138&venc { 1139 status = "okay"; 1140 1141 vdda-supply = <&vdac>; 1142 1143 port { 1144 venc_out: endpoint { 1145 remote-endpoint = <&tv_connector_in>; 1146 ti,channels = <1>; 1147 }; 1148 }; 1149}; 1150 1151&mcbsp2 { 1152 status = "okay"; 1153}; 1154 1155&ssi_port1 { 1156 pinctrl-names = "default"; 1157 pinctrl-0 = <&ssi_pins>; 1158 1159 ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ 1160 1161 modem: hsi-client { 1162 compatible = "nokia,n900-modem"; 1163 1164 pinctrl-names = "default"; 1165 pinctrl-0 = <&modem_pins>; 1166 1167 hsi-channel-ids = <0>, <1>, <2>, <3>; 1168 hsi-channel-names = "mcsaab-control", 1169 "speech-control", 1170 "speech-data", 1171 "mcsaab-data"; 1172 hsi-speed-kbps = <55000>; 1173 hsi-mode = "frame"; 1174 hsi-flow = "synchronized"; 1175 hsi-arb-mode = "round-robin"; 1176 1177 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ 1178 1179 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ 1180 <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ 1181 <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ 1182 <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ 1183 <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ 1184 gpio-names = "cmt_apeslpx", 1185 "cmt_rst_rq", 1186 "cmt_en", 1187 "cmt_rst", 1188 "cmt_bsi"; 1189 }; 1190}; 1191 1192&ssi_port2 { 1193 status = "disabled"; 1194};