qcom-apq8064-sony-xperia-lagan-yuga.dts (7919B)
1// SPDX-License-Identifier: GPL-2.0 2#include "qcom-apq8064-v2.0.dtsi" 3#include <dt-bindings/gpio/gpio.h> 4#include <dt-bindings/input/input.h> 5#include <dt-bindings/mfd/qcom-rpm.h> 6#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 7 8/ { 9 model = "Sony Xperia Z"; 10 compatible = "sony,xperia-yuga", "qcom,apq8064"; 11 12 aliases { 13 serial0 = &gsbi5_serial; 14 }; 15 16 chosen { 17 stdout-path = "serial0:115200n8"; 18 }; 19 20 gpio-keys { 21 compatible = "gpio-keys"; 22 23 pinctrl-names = "default"; 24 pinctrl-0 = <&gpio_keys_pin_a>; 25 26 camera-focus { 27 label = "camera_focus"; 28 gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; 29 linux,input-type = <1>; 30 linux,code = <KEY_CAMERA_FOCUS>; 31 }; 32 33 camera-snapshot { 34 label = "camera_snapshot"; 35 gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; 36 linux,input-type = <1>; 37 linux,code = <KEY_CAMERA>; 38 }; 39 40 volume-down { 41 label = "volume_down"; 42 gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; 43 linux,input-type = <1>; 44 linux,code = <KEY_VOLUMEDOWN>; 45 }; 46 47 volume-up { 48 label = "volume_up"; 49 gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; 50 linux,input-type = <1>; 51 linux,code = <KEY_VOLUMEUP>; 52 }; 53 }; 54 55 soc { 56 pinctrl@800000 { 57 gsbi5_uart_pin_a: gsbi5-uart-pin-active { 58 rx { 59 pins = "gpio52"; 60 function = "gsbi5"; 61 drive-strength = <2>; 62 bias-pull-up; 63 }; 64 65 tx { 66 pins = "gpio51"; 67 function = "gsbi5"; 68 drive-strength = <4>; 69 bias-disable; 70 }; 71 }; 72 73 74 sdcc3_cd_pin_a: sdcc3-cd-pin-active { 75 pins = "gpio26"; 76 function = "gpio"; 77 78 drive-strength = <2>; 79 bias-disable; 80 }; 81 }; 82 83 84 rpm@108000 { 85 regulators { 86 vin_l1_l2_l12_l18-supply = <&pm8921_s4>; 87 vin_lvs_1_3_6-supply = <&pm8921_s4>; 88 vin_lvs_4_5_7-supply = <&pm8921_s4>; 89 vin_ncp-supply = <&pm8921_l6>; 90 vin_lvs2-supply = <&pm8921_s4>; 91 vin_l24-supply = <&pm8921_s1>; 92 vin_l25-supply = <&pm8921_s1>; 93 vin_l27-supply = <&pm8921_s7>; 94 vin_l28-supply = <&pm8921_s7>; 95 96 /* Buck SMPS */ 97 s1 { 98 regulator-always-on; 99 regulator-min-microvolt = <1225000>; 100 regulator-max-microvolt = <1225000>; 101 qcom,switch-mode-frequency = <3200000>; 102 bias-pull-down; 103 }; 104 105 s2 { 106 regulator-min-microvolt = <1300000>; 107 regulator-max-microvolt = <1300000>; 108 qcom,switch-mode-frequency = <1600000>; 109 bias-pull-down; 110 }; 111 112 s3 { 113 regulator-min-microvolt = <500000>; 114 regulator-max-microvolt = <1150000>; 115 qcom,switch-mode-frequency = <4800000>; 116 bias-pull-down; 117 }; 118 119 s4 { 120 regulator-always-on; 121 regulator-min-microvolt = <1800000>; 122 regulator-max-microvolt = <1800000>; 123 qcom,switch-mode-frequency = <1600000>; 124 bias-pull-down; 125 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; 126 }; 127 128 s7 { 129 regulator-min-microvolt = <1300000>; 130 regulator-max-microvolt = <1300000>; 131 qcom,switch-mode-frequency = <3200000>; 132 }; 133 134 s8 { 135 regulator-min-microvolt = <2200000>; 136 regulator-max-microvolt = <2200000>; 137 qcom,switch-mode-frequency = <1600000>; 138 }; 139 140 /* PMOS LDO */ 141 l1 { 142 regulator-always-on; 143 regulator-min-microvolt = <1100000>; 144 regulator-max-microvolt = <1100000>; 145 bias-pull-down; 146 }; 147 148 l2 { 149 regulator-min-microvolt = <1200000>; 150 regulator-max-microvolt = <1200000>; 151 bias-pull-down; 152 }; 153 154 l3 { 155 regulator-min-microvolt = <3075000>; 156 regulator-max-microvolt = <3075000>; 157 bias-pull-down; 158 }; 159 160 l4 { 161 regulator-always-on; 162 regulator-min-microvolt = <1800000>; 163 regulator-max-microvolt = <1800000>; 164 bias-pull-down; 165 }; 166 167 l5 { 168 regulator-min-microvolt = <2950000>; 169 regulator-max-microvolt = <2950000>; 170 bias-pull-down; 171 }; 172 173 l6 { 174 regulator-min-microvolt = <2950000>; 175 regulator-max-microvolt = <2950000>; 176 bias-pull-down; 177 }; 178 179 l7 { 180 regulator-min-microvolt = <1850000>; 181 regulator-max-microvolt = <2950000>; 182 bias-pull-down; 183 }; 184 185 l8 { 186 regulator-min-microvolt = <2800000>; 187 regulator-max-microvolt = <2800000>; 188 bias-pull-down; 189 }; 190 191 l9 { 192 regulator-min-microvolt = <3000000>; 193 regulator-max-microvolt = <3000000>; 194 bias-pull-down; 195 }; 196 197 l10 { 198 regulator-min-microvolt = <2900000>; 199 regulator-max-microvolt = <2900000>; 200 bias-pull-down; 201 }; 202 203 l11 { 204 regulator-min-microvolt = <3000000>; 205 regulator-max-microvolt = <3000000>; 206 bias-pull-down; 207 }; 208 209 l12 { 210 regulator-min-microvolt = <1200000>; 211 regulator-max-microvolt = <1200000>; 212 bias-pull-down; 213 }; 214 215 l14 { 216 regulator-min-microvolt = <1800000>; 217 regulator-max-microvolt = <1800000>; 218 bias-pull-down; 219 }; 220 221 l15 { 222 regulator-min-microvolt = <1800000>; 223 regulator-max-microvolt = <2950000>; 224 bias-pull-down; 225 }; 226 227 l16 { 228 regulator-min-microvolt = <2800000>; 229 regulator-max-microvolt = <2800000>; 230 bias-pull-down; 231 }; 232 233 l17 { 234 regulator-min-microvolt = <2000000>; 235 regulator-max-microvolt = <2000000>; 236 bias-pull-down; 237 }; 238 239 l18 { 240 regulator-min-microvolt = <1200000>; 241 regulator-max-microvolt = <1200000>; 242 bias-pull-down; 243 }; 244 245 l21 { 246 regulator-min-microvolt = <1050000>; 247 regulator-max-microvolt = <1050000>; 248 bias-pull-down; 249 }; 250 251 l22 { 252 regulator-min-microvolt = <2600000>; 253 regulator-max-microvolt = <2600000>; 254 bias-pull-down; 255 }; 256 257 l23 { 258 regulator-min-microvolt = <1800000>; 259 regulator-max-microvolt = <1800000>; 260 bias-pull-down; 261 }; 262 263 l24 { 264 regulator-min-microvolt = <750000>; 265 regulator-max-microvolt = <1150000>; 266 bias-pull-down; 267 }; 268 269 l25 { 270 regulator-always-on; 271 regulator-min-microvolt = <1250000>; 272 regulator-max-microvolt = <1250000>; 273 bias-pull-down; 274 }; 275 276 l27 { 277 regulator-min-microvolt = <1100000>; 278 regulator-max-microvolt = <1100000>; 279 }; 280 281 l28 { 282 regulator-min-microvolt = <1050000>; 283 regulator-max-microvolt = <1050000>; 284 bias-pull-down; 285 }; 286 287 l29 { 288 regulator-min-microvolt = <2000000>; 289 regulator-max-microvolt = <2000000>; 290 bias-pull-down; 291 }; 292 293 /* Low Voltage Switch */ 294 lvs1 { 295 bias-pull-down; 296 }; 297 298 lvs2 { 299 bias-pull-down; 300 }; 301 302 lvs3 { 303 bias-pull-down; 304 }; 305 306 lvs4 { 307 bias-pull-down; 308 }; 309 310 lvs5 { 311 bias-pull-down; 312 }; 313 314 lvs6 { 315 bias-pull-down; 316 }; 317 318 lvs7 { 319 bias-pull-down; 320 }; 321 322 usb-switch {}; 323 324 hdmi-switch {}; 325 326 ncp { 327 regulator-min-microvolt = <1800000>; 328 regulator-max-microvolt = <1800000>; 329 qcom,switch-mode-frequency = <1600000>; 330 }; 331 }; 332 }; 333 334 qcom,ssbi@500000 { 335 pmic@0 { 336 gpio@150 { 337 gpio_keys_pin_a: gpio-keys-pin-active { 338 pins = "gpio3", "gpio4", "gpio29", "gpio35"; 339 function = "normal"; 340 341 bias-pull-up; 342 drive-push-pull; 343 input-enable; 344 power-source = <2>; 345 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 346 qcom,pull-up-strength = <0>; 347 }; 348 }; 349 }; 350 }; 351 352 usb@12500000 { 353 status = "okay"; 354 dr_mode = "otg"; 355 ulpi { 356 phy { 357 v3p3-supply = <&pm8921_l3>; 358 v1p8-supply = <&pm8921_l4>; 359 }; 360 }; 361 }; 362 363 gsbi@1a200000 { 364 status = "okay"; 365 qcom,mode = <GSBI_PROT_I2C_UART>; 366 367 serial@1a240000 { 368 status = "okay"; 369 370 pinctrl-names = "default"; 371 pinctrl-0 = <&gsbi5_uart_pin_a>; 372 }; 373 }; 374 375 amba { 376 sdcc1: mmc@12400000 { 377 status = "okay"; 378 379 vmmc-supply = <&pm8921_l5>; 380 vqmmc-supply = <&pm8921_s4>; 381 }; 382 383 sdcc3: mmc@12180000 { 384 status = "okay"; 385 386 vmmc-supply = <&pm8921_l6>; 387 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; 388 389 pinctrl-names = "default"; 390 pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; 391 }; 392 }; 393 394 riva-pil@3204000 { 395 status = "okay"; 396 397 pinctrl-names = "default"; 398 pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; 399 }; 400 }; 401};