qcom-mdm9615.dtsi (14454B)
1/* 2 * Device Tree Source for Qualcomm MDM9615 SoC 3 * 4 * Copyright (C) 2016 BayLibre, SAS. 5 * Author : Neil Armstrong <narmstrong@baylibre.com> 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 * 12 * a) This file is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of the 15 * License, or (at your option) any later version. 16 * 17 * This file is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * Or, alternatively, 23 * 24 * b) Permission is hereby granted, free of charge, to any person 25 * obtaining a copy of this software and associated documentation 26 * files (the "Software"), to deal in the Software without 27 * restriction, including without limitation the rights to use, 28 * copy, modify, merge, publish, distribute, sublicense, and/or 29 * sell copies of the Software, and to permit persons to whom the 30 * Software is furnished to do so, subject to the following 31 * conditions: 32 * 33 * The above copyright notice and this permission notice shall be 34 * included in all copies or substantial portions of the Software. 35 * 36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 43 * OTHER DEALINGS IN THE SOFTWARE. 44 */ 45 46/dts-v1/; 47 48#include <dt-bindings/interrupt-controller/arm-gic.h> 49#include <dt-bindings/clock/qcom,gcc-mdm9615.h> 50#include <dt-bindings/reset/qcom,gcc-mdm9615.h> 51#include <dt-bindings/mfd/qcom-rpm.h> 52#include <dt-bindings/soc/qcom,gsbi.h> 53 54/ { 55 #address-cells = <1>; 56 #size-cells = <1>; 57 model = "Qualcomm MDM9615"; 58 compatible = "qcom,mdm9615"; 59 interrupt-parent = <&intc>; 60 61 cpus { 62 #address-cells = <1>; 63 #size-cells = <0>; 64 65 cpu0: cpu@0 { 66 compatible = "arm,cortex-a5"; 67 device_type = "cpu"; 68 next-level-cache = <&L2>; 69 }; 70 }; 71 72 cpu-pmu { 73 compatible = "arm,cortex-a5-pmu"; 74 interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; 75 }; 76 77 clocks { 78 cxo_board { 79 compatible = "fixed-clock"; 80 #clock-cells = <0>; 81 clock-frequency = <19200000>; 82 }; 83 }; 84 85 regulators { 86 vsdcc_fixed: vsdcc-regulator { 87 compatible = "regulator-fixed"; 88 regulator-name = "SDCC Power"; 89 regulator-min-microvolt = <2700000>; 90 regulator-max-microvolt = <2700000>; 91 regulator-always-on; 92 }; 93 }; 94 95 soc: soc { 96 #address-cells = <1>; 97 #size-cells = <1>; 98 ranges; 99 compatible = "simple-bus"; 100 101 L2: cache-controller@2040000 { 102 compatible = "arm,pl310-cache"; 103 reg = <0x02040000 0x1000>; 104 arm,data-latency = <2 2 0>; 105 cache-unified; 106 cache-level = <2>; 107 }; 108 109 intc: interrupt-controller@2000000 { 110 compatible = "qcom,msm-qgic2"; 111 interrupt-controller; 112 #interrupt-cells = <3>; 113 reg = <0x02000000 0x1000>, 114 <0x02002000 0x1000>; 115 }; 116 117 timer@200a000 { 118 compatible = "qcom,kpss-timer", "qcom,msm-timer"; 119 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, 120 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, 121 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; 122 reg = <0x0200a000 0x100>; 123 clock-frequency = <27000000>, 124 <32768>; 125 cpu-offset = <0x80000>; 126 }; 127 128 msmgpio: pinctrl@800000 { 129 compatible = "qcom,mdm9615-pinctrl"; 130 gpio-controller; 131 gpio-ranges = <&msmgpio 0 0 88>; 132 #gpio-cells = <2>; 133 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 134 interrupt-controller; 135 #interrupt-cells = <2>; 136 reg = <0x800000 0x4000>; 137 }; 138 139 gcc: clock-controller@900000 { 140 compatible = "qcom,gcc-mdm9615"; 141 #clock-cells = <1>; 142 #power-domain-cells = <1>; 143 #reset-cells = <1>; 144 reg = <0x900000 0x4000>; 145 }; 146 147 lcc: clock-controller@28000000 { 148 compatible = "qcom,lcc-mdm9615"; 149 reg = <0x28000000 0x1000>; 150 #clock-cells = <1>; 151 #reset-cells = <1>; 152 }; 153 154 l2cc: clock-controller@2011000 { 155 compatible = "qcom,kpss-gcc", "syscon"; 156 reg = <0x02011000 0x1000>; 157 }; 158 159 rng@1a500000 { 160 compatible = "qcom,prng"; 161 reg = <0x1a500000 0x200>; 162 clocks = <&gcc PRNG_CLK>; 163 clock-names = "core"; 164 assigned-clocks = <&gcc PRNG_CLK>; 165 assigned-clock-rates = <32000000>; 166 }; 167 168 gsbi2: gsbi@16100000 { 169 compatible = "qcom,gsbi-v1.0.0"; 170 cell-index = <2>; 171 reg = <0x16100000 0x100>; 172 clocks = <&gcc GSBI2_H_CLK>; 173 clock-names = "iface"; 174 status = "disabled"; 175 #address-cells = <1>; 176 #size-cells = <1>; 177 ranges; 178 179 gsbi2_i2c: i2c@16180000 { 180 compatible = "qcom,i2c-qup-v1.1.1"; 181 #address-cells = <1>; 182 #size-cells = <0>; 183 reg = <0x16180000 0x1000>; 184 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; 185 186 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; 187 clock-names = "core", "iface"; 188 status = "disabled"; 189 }; 190 }; 191 192 gsbi3: gsbi@16200000 { 193 compatible = "qcom,gsbi-v1.0.0"; 194 cell-index = <3>; 195 reg = <0x16200000 0x100>; 196 clocks = <&gcc GSBI3_H_CLK>; 197 clock-names = "iface"; 198 status = "disabled"; 199 #address-cells = <1>; 200 #size-cells = <1>; 201 ranges; 202 203 gsbi3_spi: spi@16280000 { 204 compatible = "qcom,spi-qup-v1.1.1"; 205 #address-cells = <1>; 206 #size-cells = <0>; 207 reg = <0x16280000 0x1000>; 208 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; 209 spi-max-frequency = <24000000>; 210 211 clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; 212 clock-names = "core", "iface"; 213 status = "disabled"; 214 }; 215 }; 216 217 gsbi4: gsbi@16300000 { 218 compatible = "qcom,gsbi-v1.0.0"; 219 cell-index = <4>; 220 reg = <0x16300000 0x100>; 221 clocks = <&gcc GSBI4_H_CLK>; 222 clock-names = "iface"; 223 status = "disabled"; 224 #address-cells = <1>; 225 #size-cells = <1>; 226 ranges; 227 228 syscon-tcsr = <&tcsr>; 229 230 gsbi4_serial: serial@16340000 { 231 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; 232 reg = <0x16340000 0x1000>, 233 <0x16300000 0x1000>; 234 interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; 235 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; 236 clock-names = "core", "iface"; 237 status = "disabled"; 238 }; 239 }; 240 241 gsbi5: gsbi@16400000 { 242 compatible = "qcom,gsbi-v1.0.0"; 243 cell-index = <5>; 244 reg = <0x16400000 0x100>; 245 clocks = <&gcc GSBI5_H_CLK>; 246 clock-names = "iface"; 247 status = "disabled"; 248 #address-cells = <1>; 249 #size-cells = <1>; 250 ranges; 251 252 syscon-tcsr = <&tcsr>; 253 254 gsbi5_i2c: i2c@16480000 { 255 compatible = "qcom,i2c-qup-v1.1.1"; 256 #address-cells = <1>; 257 #size-cells = <0>; 258 reg = <0x16480000 0x1000>; 259 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; 260 261 /* QUP clock is not initialized, set rate */ 262 assigned-clocks = <&gcc GSBI5_QUP_CLK>; 263 assigned-clock-rates = <24000000>; 264 265 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; 266 clock-names = "core", "iface"; 267 status = "disabled"; 268 }; 269 270 gsbi5_serial: serial@16440000 { 271 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; 272 reg = <0x16440000 0x1000>, 273 <0x16400000 0x1000>; 274 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; 275 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; 276 clock-names = "core", "iface"; 277 status = "disabled"; 278 }; 279 }; 280 281 qcom,ssbi@500000 { 282 compatible = "qcom,ssbi"; 283 reg = <0x500000 0x1000>; 284 qcom,controller-type = "pmic-arbiter"; 285 286 pmicintc: pmic@0 { 287 compatible = "qcom,pm8018", "qcom,pm8921"; 288 interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; 289 #interrupt-cells = <2>; 290 interrupt-controller; 291 #address-cells = <1>; 292 #size-cells = <0>; 293 294 pwrkey@1c { 295 compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; 296 reg = <0x1c>; 297 interrupt-parent = <&pmicintc>; 298 interrupts = <50 IRQ_TYPE_EDGE_RISING>, 299 <51 IRQ_TYPE_EDGE_RISING>; 300 debounce = <15625>; 301 pull-up; 302 }; 303 304 pmicmpp: mpps@50 { 305 compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; 306 interrupt-controller; 307 #interrupt-cells = <2>; 308 reg = <0x50>; 309 gpio-controller; 310 #gpio-cells = <2>; 311 gpio-ranges = <&pmicmpp 0 0 6>; 312 }; 313 314 rtc@11d { 315 compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; 316 interrupt-parent = <&pmicintc>; 317 interrupts = <39 IRQ_TYPE_EDGE_RISING>; 318 reg = <0x11d>; 319 allow-set-time; 320 }; 321 322 pmicgpio: gpio@150 { 323 compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; 324 interrupt-controller; 325 #interrupt-cells = <2>; 326 gpio-controller; 327 gpio-ranges = <&pmicgpio 0 0 6>; 328 #gpio-cells = <2>; 329 }; 330 }; 331 }; 332 333 sdcc1bam: dma-controller@12182000{ 334 compatible = "qcom,bam-v1.3.0"; 335 reg = <0x12182000 0x8000>; 336 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 337 clocks = <&gcc SDC1_H_CLK>; 338 clock-names = "bam_clk"; 339 #dma-cells = <1>; 340 qcom,ee = <0>; 341 }; 342 343 sdcc2bam: dma-controller@12142000{ 344 compatible = "qcom,bam-v1.3.0"; 345 reg = <0x12142000 0x8000>; 346 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 347 clocks = <&gcc SDC2_H_CLK>; 348 clock-names = "bam_clk"; 349 #dma-cells = <1>; 350 qcom,ee = <0>; 351 }; 352 353 amba { 354 compatible = "simple-bus"; 355 #address-cells = <1>; 356 #size-cells = <1>; 357 ranges; 358 sdcc1: mmc@12180000 { 359 status = "disabled"; 360 compatible = "arm,pl18x", "arm,primecell"; 361 arm,primecell-periphid = <0x00051180>; 362 reg = <0x12180000 0x2000>; 363 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; 364 interrupt-names = "cmd_irq"; 365 clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; 366 clock-names = "mclk", "apb_pclk"; 367 bus-width = <8>; 368 max-frequency = <48000000>; 369 cap-sd-highspeed; 370 cap-mmc-highspeed; 371 vmmc-supply = <&vsdcc_fixed>; 372 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; 373 dma-names = "tx", "rx"; 374 assigned-clocks = <&gcc SDC1_CLK>; 375 assigned-clock-rates = <400000>; 376 }; 377 378 sdcc2: mmc@12140000 { 379 compatible = "arm,pl18x", "arm,primecell"; 380 arm,primecell-periphid = <0x00051180>; 381 status = "disabled"; 382 reg = <0x12140000 0x2000>; 383 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 384 interrupt-names = "cmd_irq"; 385 clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; 386 clock-names = "mclk", "apb_pclk"; 387 bus-width = <4>; 388 cap-sd-highspeed; 389 cap-mmc-highspeed; 390 max-frequency = <48000000>; 391 no-1-8-v; 392 vmmc-supply = <&vsdcc_fixed>; 393 dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; 394 dma-names = "tx", "rx"; 395 assigned-clocks = <&gcc SDC2_CLK>; 396 assigned-clock-rates = <400000>; 397 }; 398 }; 399 400 tcsr: syscon@1a400000 { 401 compatible = "qcom,tcsr-mdm9615", "syscon"; 402 reg = <0x1a400000 0x100>; 403 }; 404 405 rpm: rpm@108000 { 406 compatible = "qcom,rpm-mdm9615"; 407 reg = <0x108000 0x1000>; 408 409 qcom,ipc = <&l2cc 0x8 2>; 410 411 interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, 412 <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, 413 <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; 414 interrupt-names = "ack", "err", "wakeup"; 415 416 regulators { 417 compatible = "qcom,rpm-pm8018-regulators"; 418 419 vin_lvs1-supply = <&pm8018_s3>; 420 421 vdd_l7-supply = <&pm8018_s4>; 422 vdd_l8-supply = <&pm8018_s3>; 423 vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; 424 425 /* Buck SMPS */ 426 pm8018_s1: s1 { 427 regulator-min-microvolt = <500000>; 428 regulator-max-microvolt = <1150000>; 429 qcom,switch-mode-frequency = <1600000>; 430 bias-pull-down; 431 }; 432 433 pm8018_s2: s2 { 434 regulator-min-microvolt = <1225000>; 435 regulator-max-microvolt = <1300000>; 436 qcom,switch-mode-frequency = <1600000>; 437 bias-pull-down; 438 }; 439 440 pm8018_s3: s3 { 441 regulator-always-on; 442 regulator-min-microvolt = <1800000>; 443 regulator-max-microvolt = <1800000>; 444 qcom,switch-mode-frequency = <1600000>; 445 bias-pull-down; 446 }; 447 448 pm8018_s4: s4 { 449 regulator-min-microvolt = <2100000>; 450 regulator-max-microvolt = <2200000>; 451 qcom,switch-mode-frequency = <1600000>; 452 bias-pull-down; 453 }; 454 455 pm8018_s5: s5 { 456 regulator-always-on; 457 regulator-min-microvolt = <1350000>; 458 regulator-max-microvolt = <1350000>; 459 qcom,switch-mode-frequency = <1600000>; 460 bias-pull-down; 461 }; 462 463 /* PMOS LDO */ 464 pm8018_l2: l2 { 465 regulator-always-on; 466 regulator-min-microvolt = <1800000>; 467 regulator-max-microvolt = <1800000>; 468 bias-pull-down; 469 }; 470 471 pm8018_l3: l3 { 472 regulator-always-on; 473 regulator-min-microvolt = <1800000>; 474 regulator-max-microvolt = <1800000>; 475 bias-pull-down; 476 }; 477 478 pm8018_l4: l4 { 479 regulator-min-microvolt = <3300000>; 480 regulator-max-microvolt = <3300000>; 481 bias-pull-down; 482 }; 483 484 pm8018_l5: l5 { 485 regulator-min-microvolt = <2850000>; 486 regulator-max-microvolt = <2850000>; 487 bias-pull-down; 488 }; 489 490 pm8018_l6: l6 { 491 regulator-min-microvolt = <1800000>; 492 regulator-max-microvolt = <2850000>; 493 bias-pull-down; 494 }; 495 496 pm8018_l7: l7 { 497 regulator-min-microvolt = <1850000>; 498 regulator-max-microvolt = <1900000>; 499 bias-pull-down; 500 }; 501 502 pm8018_l8: l8 { 503 regulator-min-microvolt = <1200000>; 504 regulator-max-microvolt = <1200000>; 505 bias-pull-down; 506 }; 507 508 pm8018_l9: l9 { 509 regulator-min-microvolt = <750000>; 510 regulator-max-microvolt = <1150000>; 511 bias-pull-down; 512 }; 513 514 pm8018_l10: l10 { 515 regulator-min-microvolt = <1050000>; 516 regulator-max-microvolt = <1050000>; 517 bias-pull-down; 518 }; 519 520 pm8018_l11: l11 { 521 regulator-min-microvolt = <1050000>; 522 regulator-max-microvolt = <1050000>; 523 bias-pull-down; 524 }; 525 526 pm8018_l12: l12 { 527 regulator-min-microvolt = <1050000>; 528 regulator-max-microvolt = <1050000>; 529 bias-pull-down; 530 }; 531 532 pm8018_l13: l13 { 533 regulator-min-microvolt = <1850000>; 534 regulator-max-microvolt = <2950000>; 535 bias-pull-down; 536 }; 537 538 pm8018_l14: l14 { 539 regulator-min-microvolt = <2850000>; 540 regulator-max-microvolt = <2850000>; 541 bias-pull-down; 542 }; 543 544 /* Low Voltage Switch */ 545 pm8018_lvs1: lvs1 { 546 bias-pull-down; 547 }; 548 }; 549 }; 550 }; 551};