spear1310-evb.dts (7303B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * DTS file for SPEAr1310 Evaluation Baord 4 * 5 * Copyright 2012 Viresh Kumar <vireshk@kernel.org> 6 */ 7 8/dts-v1/; 9/include/ "spear1310.dtsi" 10 11/ { 12 model = "ST SPEAr1310 Evaluation Board"; 13 compatible = "st,spear1310-evb", "st,spear1310"; 14 #address-cells = <1>; 15 #size-cells = <1>; 16 17 memory { 18 reg = <0 0x40000000>; 19 }; 20 21 ahb { 22 pinmux@e0700000 { 23 pinctrl-names = "default"; 24 pinctrl-0 = <&state_default>; 25 26 state_default: pinmux { 27 i2c0 { 28 st,pins = "i2c0_grp"; 29 st,function = "i2c0"; 30 }; 31 i2s0 { 32 st,pins = "i2s0_grp"; 33 st,function = "i2s0"; 34 }; 35 i2s1 { 36 st,pins = "i2s1_grp"; 37 st,function = "i2s1"; 38 }; 39 gpio { 40 st,pins = "arm_gpio_grp"; 41 st,function = "arm_gpio"; 42 }; 43 clcd { 44 st,pins = "clcd_grp" , "clcd_high_res"; 45 st,function = "clcd"; 46 }; 47 eth { 48 st,pins = "gmii_grp"; 49 st,function = "gmii"; 50 }; 51 ssp0 { 52 st,pins = "ssp0_grp"; 53 st,function = "ssp0"; 54 }; 55 kbd { 56 st,pins = "keyboard_6x6_grp"; 57 st,function = "keyboard"; 58 }; 59 sdhci { 60 st,pins = "sdhci_grp"; 61 st,function = "sdhci"; 62 }; 63 smi-pmx { 64 st,pins = "smi_2_chips_grp"; 65 st,function = "smi"; 66 }; 67 uart0 { 68 st,pins = "uart0_grp"; 69 st,function = "uart0"; 70 }; 71 rs485 { 72 st,pins = "rs485_0_1_tdm_0_1_grp"; 73 st,function = "rs485_0_1_tdm_0_1"; 74 }; 75 i2c1_2 { 76 st,pins = "i2c_1_2_grp"; 77 st,function = "i2c_1_2"; 78 }; 79 smii { 80 st,pins = "smii_0_1_2_grp"; 81 st,function = "smii_0_1_2"; 82 }; 83 nand { 84 st,pins = "nand_8bit_grp", 85 "nand_16bit_grp"; 86 st,function = "nand"; 87 }; 88 sata { 89 st,pins = "sata0_grp"; 90 st,function = "sata"; 91 }; 92 pcie { 93 st,pins = "pcie1_grp", "pcie2_grp"; 94 st,function = "pci_express"; 95 }; 96 }; 97 }; 98 99 ahci@b1000000 { 100 status = "okay"; 101 }; 102 103 miphy@eb800000 { 104 status = "okay"; 105 }; 106 107 cf@b2800000 { 108 status = "okay"; 109 }; 110 111 dma@ea800000 { 112 status = "okay"; 113 }; 114 115 dma@eb000000 { 116 status = "okay"; 117 }; 118 119 fsmc: flash@b0000000 { 120 status = "okay"; 121 122 partition@0 { 123 label = "xloader"; 124 reg = <0x0 0x80000>; 125 }; 126 partition@80000 { 127 label = "u-boot"; 128 reg = <0x80000 0x140000>; 129 }; 130 partition@1C0000 { 131 label = "environment"; 132 reg = <0x1C0000 0x40000>; 133 }; 134 partition@200000 { 135 label = "dtb"; 136 reg = <0x200000 0x40000>; 137 }; 138 partition@240000 { 139 label = "linux"; 140 reg = <0x240000 0xC00000>; 141 }; 142 partition@E40000 { 143 label = "rootfs"; 144 reg = <0xE40000 0x0>; 145 }; 146 }; 147 148 gpio_keys { 149 compatible = "gpio-keys"; 150 #address-cells = <1>; 151 #size-cells = <0>; 152 153 button@1 { 154 label = "wakeup"; 155 linux,code = <0x100>; 156 gpios = <&gpio0 7 0x4>; 157 debounce-interval = <20>; 158 wakeup-source; 159 }; 160 }; 161 162 gmac0: eth@e2000000 { 163 phy-mode = "gmii"; 164 status = "okay"; 165 }; 166 167 sdhci@b3000000 { 168 status = "okay"; 169 }; 170 171 smi: flash@ea000000 { 172 status = "okay"; 173 clock-rate=<50000000>; 174 175 flash@e6000000 { 176 #address-cells = <1>; 177 #size-cells = <1>; 178 reg = <0xe6000000 0x800000>; 179 st,smi-fast-mode; 180 181 partition@0 { 182 label = "xloader"; 183 reg = <0x0 0x10000>; 184 }; 185 partition@10000 { 186 label = "u-boot"; 187 reg = <0x10000 0x50000>; 188 }; 189 partition@60000 { 190 label = "environment"; 191 reg = <0x60000 0x10000>; 192 }; 193 partition@70000 { 194 label = "dtb"; 195 reg = <0x70000 0x10000>; 196 }; 197 partition@80000 { 198 label = "linux"; 199 reg = <0x80000 0x310000>; 200 }; 201 partition@390000 { 202 label = "rootfs"; 203 reg = <0x390000 0x0>; 204 }; 205 }; 206 }; 207 208 ehci@e4800000 { 209 status = "okay"; 210 }; 211 212 ehci@e5800000 { 213 status = "okay"; 214 }; 215 216 ohci@e4000000 { 217 status = "okay"; 218 }; 219 220 ohci@e5000000 { 221 status = "okay"; 222 }; 223 224 apb { 225 adc@e0080000 { 226 status = "okay"; 227 }; 228 229 gpio0: gpio@e0600000 { 230 status = "okay"; 231 }; 232 233 gpio1: gpio@e0680000 { 234 status = "okay"; 235 }; 236 237 gpio@d8400000 { 238 status = "okay"; 239 }; 240 241 i2c0: i2c@e0280000 { 242 status = "okay"; 243 }; 244 245 kbd@e0300000 { 246 linux,keymap = < 0x00000001 247 0x00010002 248 0x00020003 249 0x00030004 250 0x00040005 251 0x00050006 252 0x00060007 253 0x00070008 254 0x00080009 255 0x0100000a 256 0x0101000c 257 0x0102000d 258 0x0103000e 259 0x0104000f 260 0x01050010 261 0x01060011 262 0x01070012 263 0x01080013 264 0x02000014 265 0x02010015 266 0x02020016 267 0x02030017 268 0x02040018 269 0x02050019 270 0x0206001a 271 0x0207001b 272 0x0208001c 273 0x0300001d 274 0x0301001e 275 0x0302001f 276 0x03030020 277 0x03040021 278 0x03050022 279 0x03060023 280 0x03070024 281 0x03080025 282 0x04000026 283 0x04010027 284 0x04020028 285 0x04030029 286 0x0404002a 287 0x0405002b 288 0x0406002c 289 0x0407002d 290 0x0408002e 291 0x0500002f 292 0x05010030 293 0x05020031 294 0x05030032 295 0x05040033 296 0x05050034 297 0x05060035 298 0x05070036 299 0x05080037 300 0x06000038 301 0x06010039 302 0x0602003a 303 0x0603003b 304 0x0604003c 305 0x0605003d 306 0x0606003e 307 0x0607003f 308 0x06080040 309 0x07000041 310 0x07010042 311 0x07020043 312 0x07030044 313 0x07040045 314 0x07050046 315 0x07060047 316 0x07070048 317 0x07080049 318 0x0800004a 319 0x0801004b 320 0x0802004c 321 0x0803004d 322 0x0804004e 323 0x0805004f 324 0x08060050 325 0x08070051 326 0x08080052 >; 327 autorepeat; 328 st,mode = <0>; 329 suspended_rate = <2000000>; 330 status = "okay"; 331 }; 332 333 rtc@e0580000 { 334 status = "okay"; 335 }; 336 337 serial@e0000000 { 338 status = "okay"; 339 pinctrl-names = "default"; 340 pinctrl-0 = <>; 341 }; 342 343 spi0: spi@e0100000 { 344 status = "okay"; 345 num-cs = <3>; 346 cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>; 347 348 stmpe610@0 { 349 compatible = "st,stmpe610"; 350 reg = <0>; 351 #address-cells = <1>; 352 #size-cells = <0>; 353 spi-max-frequency = <1000000>; 354 spi-cpha; 355 pl022,hierarchy = <0>; 356 pl022,interface = <0>; 357 pl022,slave-tx-disable; 358 pl022,com-mode = <0>; 359 pl022,rx-level-trig = <0>; 360 pl022,tx-level-trig = <0>; 361 pl022,ctrl-len = <0x7>; 362 pl022,wait-state = <0>; 363 pl022,duplex = <0>; 364 interrupts = <6 0x4>; 365 interrupt-parent = <&gpio1>; 366 irq-trigger = <0x2>; 367 368 stmpe_touchscreen { 369 compatible = "st,stmpe-ts"; 370 ts,sample-time = <4>; 371 ts,mod-12b = <1>; 372 ts,ref-sel = <0>; 373 ts,adc-freq = <1>; 374 ts,ave-ctrl = <1>; 375 ts,touch-det-delay = <2>; 376 ts,settling = <2>; 377 ts,fraction-z = <7>; 378 ts,i-drive = <1>; 379 }; 380 }; 381 382 flash@1 { 383 compatible = "st,m25p80"; 384 reg = <1>; 385 spi-max-frequency = <12000000>; 386 spi-cpol; 387 spi-cpha; 388 pl022,hierarchy = <0>; 389 pl022,interface = <0>; 390 pl022,slave-tx-disable; 391 pl022,com-mode = <0x2>; 392 pl022,rx-level-trig = <0>; 393 pl022,tx-level-trig = <0>; 394 pl022,ctrl-len = <0x11>; 395 pl022,wait-state = <0>; 396 pl022,duplex = <0>; 397 }; 398 }; 399 400 wdt@ec800620 { 401 status = "okay"; 402 }; 403 }; 404 }; 405};