spear1310.dtsi (7332B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * DTS file for all SPEAr1310 SoCs 4 * 5 * Copyright 2012 Viresh Kumar <vireshk@kernel.org> 6 */ 7 8/include/ "spear13xx.dtsi" 9 10/ { 11 compatible = "st,spear1310"; 12 13 ahb { 14 spics: spics@e0700000{ 15 compatible = "st,spear-spics-gpio"; 16 reg = <0xe0700000 0x1000>; 17 st-spics,peripcfg-reg = <0x3b0>; 18 st-spics,sw-enable-bit = <12>; 19 st-spics,cs-value-bit = <11>; 20 st-spics,cs-enable-mask = <3>; 21 st-spics,cs-enable-shift = <8>; 22 gpio-controller; 23 #gpio-cells = <2>; 24 }; 25 26 miphy0: miphy@eb800000 { 27 compatible = "st,spear1310-miphy"; 28 reg = <0xeb800000 0x4000>; 29 misc = <&misc>; 30 phy-id = <0>; 31 #phy-cells = <1>; 32 status = "disabled"; 33 }; 34 35 miphy1: miphy@eb804000 { 36 compatible = "st,spear1310-miphy"; 37 reg = <0xeb804000 0x4000>; 38 misc = <&misc>; 39 phy-id = <1>; 40 #phy-cells = <1>; 41 status = "disabled"; 42 }; 43 44 miphy2: miphy@eb808000 { 45 compatible = "st,spear1310-miphy"; 46 reg = <0xeb808000 0x4000>; 47 misc = <&misc>; 48 phy-id = <2>; 49 #phy-cells = <1>; 50 status = "disabled"; 51 }; 52 53 ahci0: ahci@b1000000 { 54 compatible = "snps,spear-ahci"; 55 reg = <0xb1000000 0x10000>; 56 interrupts = <0 68 0x4>; 57 phys = <&miphy0 0>; 58 phy-names = "sata-phy"; 59 status = "disabled"; 60 }; 61 62 ahci1: ahci@b1800000 { 63 compatible = "snps,spear-ahci"; 64 reg = <0xb1800000 0x10000>; 65 interrupts = <0 69 0x4>; 66 phys = <&miphy1 0>; 67 phy-names = "sata-phy"; 68 status = "disabled"; 69 }; 70 71 ahci2: ahci@b4000000 { 72 compatible = "snps,spear-ahci"; 73 reg = <0xb4000000 0x10000>; 74 interrupts = <0 70 0x4>; 75 phys = <&miphy2 0>; 76 phy-names = "sata-phy"; 77 status = "disabled"; 78 }; 79 80 pcie0: pcie@b1000000 { 81 compatible = "st,spear1340-pcie", "snps,dw-pcie"; 82 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; 83 reg-names = "dbi", "config"; 84 interrupts = <0 68 0x4>; 85 num-lanes = <1>; 86 phys = <&miphy0 1>; 87 phy-names = "pcie-phy"; 88 #address-cells = <3>; 89 #size-cells = <2>; 90 device_type = "pci"; 91 ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ 92 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ 93 bus-range = <0x00 0xff>; 94 status = "disabled"; 95 }; 96 97 pcie1: pcie@b1800000 { 98 compatible = "st,spear1340-pcie", "snps,dw-pcie"; 99 reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; 100 reg-names = "dbi", "config"; 101 interrupts = <0 69 0x4>; 102 num-lanes = <1>; 103 phys = <&miphy1 1>; 104 phy-names = "pcie-phy"; 105 #address-cells = <3>; 106 #size-cells = <2>; 107 device_type = "pci"; 108 ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ 109 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ 110 bus-range = <0x00 0xff>; 111 status = "disabled"; 112 }; 113 114 pcie2: pcie@b4000000 { 115 compatible = "st,spear1340-pcie", "snps,dw-pcie"; 116 reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; 117 reg-names = "dbi", "config"; 118 interrupts = <0 70 0x4>; 119 num-lanes = <1>; 120 phys = <&miphy2 1>; 121 phy-names = "pcie-phy"; 122 #address-cells = <3>; 123 #size-cells = <2>; 124 device_type = "pci"; 125 ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ 126 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ 127 bus-range = <0x00 0xff>; 128 status = "disabled"; 129 }; 130 131 gmac1: eth@5c400000 { 132 compatible = "st,spear600-gmac"; 133 reg = <0x5c400000 0x8000>; 134 interrupts = <0 95 0x4>; 135 interrupt-names = "macirq"; 136 phy-mode = "mii"; 137 status = "disabled"; 138 }; 139 140 gmac2: eth@5c500000 { 141 compatible = "st,spear600-gmac"; 142 reg = <0x5c500000 0x8000>; 143 interrupts = <0 96 0x4>; 144 interrupt-names = "macirq"; 145 phy-mode = "mii"; 146 status = "disabled"; 147 }; 148 149 gmac3: eth@5c600000 { 150 compatible = "st,spear600-gmac"; 151 reg = <0x5c600000 0x8000>; 152 interrupts = <0 97 0x4>; 153 interrupt-names = "macirq"; 154 phy-mode = "rmii"; 155 status = "disabled"; 156 }; 157 158 gmac4: eth@5c700000 { 159 compatible = "st,spear600-gmac"; 160 reg = <0x5c700000 0x8000>; 161 interrupts = <0 98 0x4>; 162 interrupt-names = "macirq"; 163 phy-mode = "rgmii"; 164 status = "disabled"; 165 }; 166 167 pinmux: pinmux@e0700000 { 168 compatible = "st,spear1310-pinmux"; 169 reg = <0xe0700000 0x1000>; 170 #gpio-range-cells = <3>; 171 }; 172 173 apb { 174 i2c1: i2c@5cd00000 { 175 #address-cells = <1>; 176 #size-cells = <0>; 177 compatible = "snps,designware-i2c"; 178 reg = <0x5cd00000 0x1000>; 179 interrupts = <0 87 0x4>; 180 status = "disabled"; 181 }; 182 183 i2c2: i2c@5ce00000 { 184 #address-cells = <1>; 185 #size-cells = <0>; 186 compatible = "snps,designware-i2c"; 187 reg = <0x5ce00000 0x1000>; 188 interrupts = <0 88 0x4>; 189 status = "disabled"; 190 }; 191 192 i2c3: i2c@5cf00000 { 193 #address-cells = <1>; 194 #size-cells = <0>; 195 compatible = "snps,designware-i2c"; 196 reg = <0x5cf00000 0x1000>; 197 interrupts = <0 89 0x4>; 198 status = "disabled"; 199 }; 200 201 i2c4: i2c@5d000000 { 202 #address-cells = <1>; 203 #size-cells = <0>; 204 compatible = "snps,designware-i2c"; 205 reg = <0x5d000000 0x1000>; 206 interrupts = <0 90 0x4>; 207 status = "disabled"; 208 }; 209 210 i2c5: i2c@5d100000 { 211 #address-cells = <1>; 212 #size-cells = <0>; 213 compatible = "snps,designware-i2c"; 214 reg = <0x5d100000 0x1000>; 215 interrupts = <0 91 0x4>; 216 status = "disabled"; 217 }; 218 219 i2c6: i2c@5d200000 { 220 #address-cells = <1>; 221 #size-cells = <0>; 222 compatible = "snps,designware-i2c"; 223 reg = <0x5d200000 0x1000>; 224 interrupts = <0 92 0x4>; 225 status = "disabled"; 226 }; 227 228 i2c7: i2c@5d300000 { 229 #address-cells = <1>; 230 #size-cells = <0>; 231 compatible = "snps,designware-i2c"; 232 reg = <0x5d300000 0x1000>; 233 interrupts = <0 93 0x4>; 234 status = "disabled"; 235 }; 236 237 spi1: spi@5d400000 { 238 compatible = "arm,pl022", "arm,primecell"; 239 reg = <0x5d400000 0x1000>; 240 interrupts = <0 99 0x4>; 241 #address-cells = <1>; 242 #size-cells = <0>; 243 status = "disabled"; 244 }; 245 246 serial@5c800000 { 247 compatible = "arm,pl011", "arm,primecell"; 248 reg = <0x5c800000 0x1000>; 249 interrupts = <0 82 0x4>; 250 status = "disabled"; 251 }; 252 253 serial@5c900000 { 254 compatible = "arm,pl011", "arm,primecell"; 255 reg = <0x5c900000 0x1000>; 256 interrupts = <0 83 0x4>; 257 status = "disabled"; 258 }; 259 260 serial@5ca00000 { 261 compatible = "arm,pl011", "arm,primecell"; 262 reg = <0x5ca00000 0x1000>; 263 interrupts = <0 84 0x4>; 264 status = "disabled"; 265 }; 266 267 serial@5cb00000 { 268 compatible = "arm,pl011", "arm,primecell"; 269 reg = <0x5cb00000 0x1000>; 270 interrupts = <0 85 0x4>; 271 status = "disabled"; 272 }; 273 274 serial@5cc00000 { 275 compatible = "arm,pl011", "arm,primecell"; 276 reg = <0x5cc00000 0x1000>; 277 interrupts = <0 86 0x4>; 278 status = "disabled"; 279 }; 280 281 thermal@e07008c4 { 282 st,thermal-flags = <0x7000>; 283 }; 284 285 gpiopinctrl: gpio@d8400000 { 286 compatible = "st,spear-plgpio"; 287 reg = <0xd8400000 0x1000>; 288 interrupts = <0 100 0x4>; 289 #interrupt-cells = <1>; 290 interrupt-controller; 291 gpio-controller; 292 #gpio-cells = <2>; 293 gpio-ranges = <&pinmux 0 0 246>; 294 status = "disabled"; 295 296 st-plgpio,ngpio = <246>; 297 st-plgpio,enb-reg = <0xd0>; 298 st-plgpio,wdata-reg = <0x90>; 299 st-plgpio,dir-reg = <0xb0>; 300 st-plgpio,ie-reg = <0x30>; 301 st-plgpio,rdata-reg = <0x70>; 302 st-plgpio,mis-reg = <0x10>; 303 st-plgpio,eit-reg = <0x50>; 304 }; 305 }; 306 }; 307};